The largest database of trusted experimental protocols

Formvar

Formvar is a synthetic polymer commonly used as a support film in electron microscopy.
It provides a thin, transparent, and stable substrate for mounting samples, enabling high-resolution imaging.
Formvar is known for its ability to withstand the high-vacuum conditions of electron microscopes, making it a popular choice in a variety of biological and material science applications.
Researchers can use the PubCompare.ai platform to quickly identify the optimal Formvar protocols and products, streamlining their research process and enhancing accuracy and reproducibility.
This AI-driven platform allows users to locate the best Formvar-related protocols from literature, preprints, and patents using advanced comparisons, saving time and improving research outcomes.

Most cited protocols related to «Formvar»

Cells were fixed for 2 d at 4°C with 4% paraformaldehyde (Electron Microscopy Sciences) in 0.25 M Hepes, pH 7.4, washed in PBS, scraped, and embedded in 10% gelatin. Small pieces of the gelatin pellets were infiltrated overnight at 4°C with 2.3 M sucrose in PBS, and then frozen in liquid nitrogen. Gold sections (95 nm thick) were cut using a Leica ultracut ultramicrotome with an FCS cryoattachment at −108°C and collected on formvar- and carbon-coated nickel grids using a 1:1 mixture of 2% methyl cellulose (25 centipoises; Sigma-Aldrich) and 2.3 M sucrose in PBS (Liou et al. 1996).
After quenching with 0.1 M NH4Cl in PBS for 10 min, the grids were incubated for 20 min with a solution of 1% fish skin gelatin (FSG; Sigma-Aldrich) in PBS. They were then incubated with anti-HA antibodies (1:100 in PBS-FSG), washed four times for 4 min in PBS, incubated for 30 min at room temperature with rabbit anti–mouse IgGs (1:50 in PBS-FSG; Cappel/ICN Biomedicals), washed another four times for 4 min in PBS, and finally incubated for 30 min at room temperature with 5 nm protein A–gold (from the laboratory of J. Slot, University of Utrecht, Utrecht, the Netherlands) in PBS-FSG. After four final washes in PBS, the sections were fixed in 1% glutaraldehyde in PBS for 10 min, washed three times in water and stained for 10 min at room temperature with 2% neutral uranyl acetate (Electron Microscopy Sciences). After three short washes in water, the sections were infiltrated with a mixture of 1.8% methylcellulose and 0.5% uranyl acetate and air-dried.
Publication 2001
Anti-Antibodies anti-IgG Carbon Cells Electron Microscopy Formvar Freezing Gelatins Glutaral Gold HEPES Ichthyosis Congenita Methylcellulose Mus Nickel Nitrogen paraform Pellets, Drug Rabbits Staphylococcal Protein A Sucrose Ultramicrotomy uranyl acetate
For transmission electron microscopy, freshly isolated exosome suspensions were fixed in 4% paraformaldehyde for 1 hour. Exosome suspensions from different samples (approximately 5 μl) were applied to copper mesh Formvar coated carbon stabilized grids, were allowed to adsorb to the grid for 4–5 minutes and then were wicked off with filter paper. For negative staining of exosomes, 1% Aqueous Uranyl Acetate (5 μl) was applied to the grid for 30 seconds, then wicked off with Whatman filter paper. Grids were allowed to thoroughly dry before viewing.
As for immunoelectron labelling with anti-CD63 and anti-CD9, exosome samples were fixed overnight in 4% paraformaldehyde diluted in 0.1M cacodylate buffer (pH 7.4). Fixed exosome preparations (20 μl) were applied to a carbon-Formvar coated 200 mesh nickel grids, and samples were allowed to stand for 30 minutes before wiping off excess using Whatman filter paper. Grids were then floated (sample side down) onto a 20 μl drop of 1M Ammonium Chloride for 30 minutes to quench aldehyde groups from the fixation step, followed by floating on drops of blocking buffer (0.4% BSA in PBS) for 2 hours. Grids were rinsed 3 times (5 minutes each) using 1xPBS and then were allowed to incubate with either blocking buffer only (negative control) or primary antibody (CD63) diluted with blocking buffer (1:100) for 1 hour. Rinsing of the grids using deionized water (3 times for 5 minutes each) and 1xPBS followed the incubation step. Grids were then floated on drops of 1.4 nm anti-rabbit nanogold (Nanoprobes, Inc.) diluted 1:1000 in blocking buffer for 1 hour. Enhancing of grids using HQ Silver (gold enhancement reagent, Nanoprobes, Inc.) was then performed for 1 minute, followed by rinsing in deionized ice-cold water. As a final step, negative staining in 2% aqueous Uranyl Acetate was performed, and samples were wicked dry and then allowed to air dry. TEM examination was performed using JEM 1230 transmission electron microscope (JEOL USA Inc., Peabody, MA) at 110 kV and imaged with an UltraScan 4000 CCD camera & First Light Digital Camera Controller (Gatan Inc., Pleasanton, CA). TEM sample preparation and imaging was performed at the Electron Microscopy and Histology Core Laboratory at Augusta University (www.augusta.edu/mcg/cba/emhisto/).
Publication 2017
Aldehydes Cacodylate Carbon Cardiac Arrest Chloride, Ammonium Cold Temperature Copper Electron Microscopy Exosomes Formvar Gold Immunoglobulins Light Neoplasm Metastasis Nickel paraform Rabbits Silver Strains Thumb Transmission Electron Microscopy uranyl acetate
The standard chromosome spreading protocol has been described previously for our laboratory (Lenzi et al., 2005 (link)). The nuclear contents of whole-mount spermatocytes (or oocytes) were displayed by drying down a cell suspension, in hypotonic buffer, from either testis, or ovary, in 1% paraformaldehyde containing 0.15% Triton X-100 (Peters et al., 1997 (link)). Whole testes or ovaries were incubated on ice for 60 min in hypotonic extraction buffer (HEB; 30 mM Tris, pH 8.2, 50 mM sucrose, 17 mM trisodium citrate dihydrate, 5 mM EDTA, 0.5 mM DTT, and 0.5 mM PMSF). Either a one-inch length of tubule, or a whole ovary, were placed in a 20-μl drop of 100 mM sucrose, pH 8.2, the tissue was macerated, and a second 20-μl drop of sucrose solution was added and the cell suspension was pipetted up and down several times. Remnant pieces of tubule were removed. Cleaned slides were dipped in the paraformaldehyde and Triton X-100 solution, and most liquid was drained off, such that only enough liquid remained to coat the slide. 20 μl of the cell suspension was added in one corner and the cells were slowly dispersed, first in a horizontal direction and then vertical. The remaining 20 μl of cell suspension was used to make a second slide and both were placed in a humid chamber to dry slowly at RT for 2 h. The slides were washed three times for 1 min in 0.4% Kodak Photo-Flo 200 and air dried for at least 15 min. For EM preparations, to make the SCs accessible to immunogold grains, the slides were DNaseI treated (1 μl/ml of DMEM) before being air dried (Moens et al., 2002 (link)). The slides were washed and blocked (three times for 10 min each) in PBS and incubated in primary antibodies overnight at RT in a humid chamber. Primary antibodies were used at varying concentrations, and generally a 10-fold higher concentration was used for EM than immunofluorescence. After washes, slides were incubated in secondary antibodies, conjugated to either fluorochrome or colloidal gold (Jackson ImmunoResearch Laboratories), for 2 h at 37°C. After washes the slides were mounted with ProLong Antifade (Invitrogen) for fluorescence microscopy. Images were captured on a Olympus IX81 microscope attached to a 12-bit Cooke Sensicam CCD instrument and sent to IP Lab software.
For EM, slides were incubated in 4% alcoholic phosphotungstic acid for 15 min, followed by three 1-min washes in 95% ethanol, to enhance visualization of MNs. Slides were air dried and then dipped in 0.25% formvar (Electron Microscopy Sciences) and air dried under glass. The plastic was scored, treated with 25% hydrofluoric acid, and floated off in water with attached cells. Plastic was transferred to EM grids and used for transmission EM (JEOL 1200EX).
Publication 2005
Alcoholics Antibodies Buffers Cells Cereals Chromosomes Edetic Acid Electron Microscopy Ethanol Fluorescent Antibody Technique Fluorescent Dyes Formvar Gold Colloid Hydrofluoric acid Microscopy Microscopy, Fluorescence Oocytes Ovary paraform Phosphotungstic Acid Sodium Citrate Dihydrate Spermatocytes Sucrose Testis Tissues Transmission, Communicable Disease Triton X-100 Tromethamine

Protocol full text hidden due to copyright restrictions

Open the protocol to access the free full text link

Publication 2008
Antibodies Aves Biotin Cells Chickens Citrates Cloning Vectors CTNNB1 protein, human Dyes Equus asinus Formvar Glial Fibrillary Acidic Protein Goat Histone H3 Mice, House Molecular Probes Protein, Nestin Rabbits Reconstructive Surgical Procedures S100 Calcium Binding Protein beta Subunit Serum Streptavidin Tubulin Vimentin
Vibrotome sections of the right kidney of 16-wk-old mice, chronically infused with either active or inactive hyaluronidase for 4 wk, were fixed overnight in 2% PFA, washed twice with phosphate-buffered saline (PBS), and blocked for 30 min on ice with 10% normal goat serum and 0.3% Triton X-100 in PBS. Next, samples were incubated overnight at 4°C with HRP-conjugated goat anti–mouse albumin antibody (Bethyl Laboratories, Inc.) in 1% normal goat serum in PBS, washed twice with PBS, stained for 30 min at 4°C with DAB and H2O2, washed with PBS and 0.1 M sodium cacodylate, incubated for 1 h with 1.5% GA and 1% PFA, rinsed in cacodylate, and postfixed for 1 h in 1% osmium tetroxide and 1.5% potassium ferrocyanide. Samples were dehydrated in a graded ethanol series up to 100% and embedded in Epon. Sequential 100-nm sections were mounted on a copper slot grid covered with formvar support film and a 3-nm carbon coating for TEM, and on a water drop on a clean glass slide for RCM (Prins et al., 2005 ). The RCM sample was mounted with immersion oil (Immersol 518F) on an RCM-adapted microscope (reflection contrast device RC; Leica). Images were recorded with a 1.25 NA 100× objective.
Publication 2012
Albumins Antibodies, Anti-Idiotypic Cacodylate Carbon Copper EPON Ethanol Formvar Goat Hyaluronidase Kidney Medical Devices Mice, House Microscopy Normal Saline Osmium Tetroxide Peroxide, Hydrogen Phosphates potassium ferrocyanide Primed In Situ Labeling Reflex Saline Solution Serum Sodium Submersion Triton X-100

Most recents protocols related to «Formvar»

Example 1

a. Materials and Methods

i. Vector Construction

1. Virus-Like Particle

As most broadly neutralizing HPV antibodies are derived from the highly conserved N-terminal region of L2, amino acids 14-122 of HPV16 L2 were used to create HBc VLPs. L2 with flanking linker regions was inserted into the tip of the a-helical spike of an HBc gene copy which was fused to another copy of HBc lacking the L2 insert. This arrangement allows the formation of HBc dimers that contain only a single copy of L2, increasing VLP stability (Peyret et al. 2015). This heterodimer is referred to as HBche-L2. A dicot plant-optimized HPV16 L2 coding sequence was designed based upon the sequence of GenBank Accession No. CAC51368.1 and synthesized in vitro using synthetic oligonucleotides by the method described (Stemmer et al., 1995). The plant-optimized L2 nucleotide sequence encoding residues 1-473 is posted at GenBank Accession No. KC330735. PCR end-tailoring was used to insert Xbal and SpeI sites flanking the L2 aa 14-122 using primers L2-14-Xba-F (SEQ ID NO. 1: CGTCTAGAGTCCGCAACCCAACTTTACAAG) and L2-122-Spe-R (SEQ ID NO. 2: G GGACTAGTTGGGGCACCAGCATC). The SpeI site was fused to a sequence encoding a 6His tag, and the resulting fusion was cloned into a geminiviral replicon vector (Diamos, 2016) to produce pBYe3R2K2Mc-L2(14-122)6H.

The HBche heterodimer VLP system was adapted from Peyret et al (2015). Using the plant optimized HBc gene (Huang et al., 2009), inventors constructed a DNA sequence encoding a dimer comprising HBc aa 1-149, a linker (G2S)5G (SEQ ID NO. 39), HBc aa 1-77, a linker GT(G4S)2 (SEQ ID NO. 40), HPV-16 L2 aa 14-122, a linker (GGS)2GSSGGSGG (SEQ ID NO. 41), and HBc aa 78-176. The dimer sequence was generated using multiple PCR steps including overlap extensions and insertion of BamHI and SpeI restriction sites flanking the L2 aa 14-122, using primers L2-14-Bam-F (SEQ ID NO. 3: CAGGATCCGCAACC CAACTTTACAAGAC) and L2-122-Spe-R (SEQ ID NO. 2). The HBche-L2 coding sequence was inserted into a geminiviral replicon binary vector pBYR2eK2M (FIG. 3), which includes the following elements: CaMV 35S promoter with duplicated enhancer (Huang et al., 2009), 5′ UTR of N. benthamiana psaK2 gene (Diamos et al., 2016), intron-containing 3′ UTR and terminator of tobacco extensin (Rosenthal et al, 2018), CaMV 35S 3′ terminator (Rosenthal et al, 2018), and Rb7 matrix attachment region (Diamos et al., 2016).

2. Recombinant Immune Complex

The recombinant immune complex (RIC) vector was adapted from Kim et al., (2015). The HPV-16 L2 (aa 14-122) segment was inserted into the BamHI and SpeI sites of the gene encoding humanized mAb 6D8 heavy chain, resulting in 6D8 epitope-tagged L2. The heavy chain fusion was inserted into an expression cassette linked to a 6D8 kappa chain expression cassette, all inserted into a geminiviral replicon binary vector (FIG. 3, RIC vector). Both cassettes contain CaMV 35S promoter with duplicated enhancer (Huang et al., 2009), 5′ UTR of N. benthamiana psaK2 gene (Diamos et al., 2016), intron-containing 3′ UTR and terminator of tobacco extensin (Rosenthal et al, 2018), and Rb7 matrix attachment region (Diamos et al., 2016).

ii. Agroinfiltration of Nicotiana benthamiana Leaves

Binary vectors were separately introduced into Agrobacterium tumefaciens EHA105 by electroporation. The resulting strains were verified by restriction digestion or PCR, grown overnight at 30° C., and used to infiltrate leaves of 5- to 6-week-old N. benthamiana maintained at 23-25° C. Briefly, the bacteria were pelleted by centrifugation for 5 minutes at 5,000 g and then resuspended in infiltration buffer (10 mM 2-(N-morpholino)ethanesulfonic acid (MES), pH 5.5 and 10 mM MgSO4) to OD600=0.2, unless otherwise described. The resulting bacterial suspensions were injected by using a syringe without needle into leaves through a small puncture (Huang et al. 2004). Plant tissue was harvested after 5 DPI, or as stated for each experiment. Leaves producing GFP were photographed under UV illumination generated by a B-100AP lamp (UVP, Upland, CA).

iii. Protein Extraction

Total protein extract was obtained by homogenizing agroinfiltrated leaf samples with 1:5 (w:v) ice cold extraction buffer (25 mM sodium phosphate, pH 7.4, 100 mM NaCl, 1 mM EDTA, 0.1% Triton X-100, 10 mg/mL sodium ascorbate, 0.3 mg/mL PMSF) using a Bullet Blender machine (Next Advance, Averill Park, NY) following the manufacturer's instruction. To enhance solubility, homogenized tissue was rotated at room temperature or 4° C. for 30 minutes. The crude plant extract was clarified by centrifugation at 13,000 g for 10 minutes at 4° C. Necrotic leaf tissue has reduced water weight, which can lead to inaccurate measurements based on leaf mass. Therefore, extracts were normalized based on total protein content by Bradford protein assay kit (Bio-Rad) with bovine serum albumin as standard.

iv. SDS-PAGE and Western Blot

Clarified plant protein extract was mixed with sample buffer (50 mM Tris-HCl, pH 6.8, 2% SDS, 10% glycerol, 0.02% bromophenol blue) and separated on 4-15% polyacrylamide gels (Bio-Rad). For reducing conditions, 0.5M DTT was added, and the samples were boiled for 10 minutes prior to loading. Polyacrylamide gels were either transferred to a PVDF membrane or stained with Coomassie stain (Bio-Rad) following the manufacturer's instructions. For L2 detection, the protein transferred membranes were blocked with 5% dry milk in PBST (PBS with 0.05% tween-20) overnight at 4° C. and probed with polyclonal rabbit anti-L2 diluted 1:5000 in 1% PBSTM, followed by goat anti-rabbit horseradish peroxidase conjugate (Sigma). Bound antibody was detected with ECL reagent (Amersham).

v. Immunization of Mice and Sample Collection

All animals were handled in accordance to the Animal Welfare Act and Arizona State University IACUC. Female BALB/C mice, 6-8 weeks old, were immunized subcutaneously with purified plant-expressed L2 (14-122), HBche-L2 VLP, L2 RIC, or PBS mixed 1:1 with Imject® Alum (Thermo Scientific, Rockford, IL). In all treatment groups, the total weight of antigen was set to deliver an equivalent 5 μg of L2. Doses were given on days 0, 21, and 42. Serum collection was done as described (Santi et al. 2008) by submandibular bleed on days 0, 21, 42, and 63.

vi. Antibody Measurements

Mouse antibody titers were measured by ELISA. Bacterially-expressed L2 (amino acids 11-128) was bound to 96-well high-binding polystyrene plates (Corning), and the plates were blocked with 5% nonfat dry milk in PBST. After washing the wells with PBST (PBS with 0.05% Tween 20), the diluted mouse sera were added and incubated. Mouse antibodies were detected by incubation with polyclonal goat anti-mouse IgG-horseradish peroxidase conjugate (Sigma). The plate was developed with TMB substrate (Pierce) and the absorbance was read at 450 nm. Endpoint titers were taken as the reciprocal of the lowest dilution which produced an OD450 reading twice the background. IgG1 and IgG2a antibodies were measured with goat-anti mouse IgG1 or IgG2a horseradish peroxidase conjugate.

vii. Electron Microscopy

Purified samples of HBche or HBche-L2 were initially incubated on 75/300 mesh grids coated with formvar. Following incubation, samples were briefly washed twice with deionized water then negatively stained with 2% aqueous uranyl acetate. Transmission electron microscopy was performed with a Phillips CM-12 microscope, and images were acquired with a Gatan model 791 CCD camera.

viii. Statistical Analysis

The significance of vaccine treatments and virus neutralization was measured by non-parametric Mann-Whitney test using GraphPad prism software. Two stars (**) indicates p values <0.05. Three stars (***) indicates p values <0.001.

b. Design and Expression of HBc VLPs and RIC Displaying HPV16 L2

BeYDV plant expression vectors (FIG. 3) expressing either the target VLP HBche-L2, or L2 and HBche alone as controls, were agroinfiltrated into the leaves of N. benthamiana and analyzed for VLP production. After 4-5 days post infiltration (DPI), leaves displayed only minor signs of tissue necrosis, indicating that the VLP was well-tolerated by the plants (FIG. 4A). Leaf extracts analyzed by reducing SDS-PAGE showed an abundant band near the predicted size of 51 kDa for HBche-L2, just above the large subunit of rubisco (RbcL). HBche was detected around the predicted size of 38 kDa (FIG. 4B). Western blot probed with anti-L2 polyclonal serum detected a band for HBche-L2 at ˜51 kDa (FIG. 4B). These results indicate that this plant system is capable of producing high levels of L2-containing HBc VLP.

To express L2-containing MC, amino acids 14-122 of HPV16 L2 were fused with linker to the C-terminus of the 6D8 antibody heavy chain and tagged with the 6D8 epitope (Kim et al. 2015). A BeYDV vector (FIG. 3) expressing both the L2-fused 6D8 heavy chain and the light chain was agroinfiltrated into leaves of N. benthamiana and analyzed for RIC production. To create more homogenous human-type glycosylation, which has been shown to improve antibody Fc receptor binding in vivo, transgenic plants silenced for xylosyltransferase and fucosyltransferase were employed (Castilho and Steinkellner 2012). By western blot, high molecular weight bands >150 kDa suggestive of RIC formation were observed (FIG. 4C). Expression of soluble L2 RIC was lower than HBche-L2 due to relatively poor solubility of the RIC (FIG. 4C).

After rigorous genetic optimization, the N. benthamiana system is capable of producing very high levels of recombinant protein, up to 30-50% of the total soluble plant protein, in 4-5 days (Diamos et al. 2016). Using this system, we produced and purified milligram quantities of fully assembled and potently immunogenic HBc VLPs displaying HPV L2 through a simple one-step purification process (FIGS. 4A-4C and 6).

c. Purification and Characterization of HBche-L2 and L2 RIC

To assess the assembly of HBc-L2 VLP, clarified plant extracts containing either HBche-L2 or HBche were analyzed by sucrose gradient sedimentation. HBche-L2 sedimented largely with HBche, which is known to form VLP, though a small increase in density was observed with HBche-L2, perhaps due to the incorporation of L2 into the virus particle (FIG. 5A). To demonstrate particle formation, sucrose fractions were examined by electron microscopy. Both HBche and HBche-L2 formed ˜30 nm particles, although the appearance of HBche-L2 VLP suggested slightly larger, fuller particles (FIGS. 5C and 5D). As most plant proteins do not sediment with VLP, pooling peak sucrose fractions resulted in >95% pure HBche-L2 (FIG. 5B), yielding sufficient antigen (>3 mg) for vaccination from a single plant leaf.

L2 RIC was purified from plant tissue by protein G affinity chromatography. By SDS-PAGE, an appropriately sized band was visible >150 kDa that was highly pure (FIG. 5B). Western blot confirmed the presence of L2 in this band, indicating proper RIC formation (FIG. 5B). L2 RIC bound to human complement C1q receptor with substantially higher affinity compared to free human IgG standard, suggesting proper immune complex formation (FIG. 5E).

d. Mouse Immunization with HBche-L2 and L2 RIC

Groups of Balb/c mice (n=8) were immunized, using alum as adjuvant, with three doses each of 5 μg L2 delivered as either L2 alone, HBche-L2 VLP, L2 RIC, or a combination of half VLP and half RIC. VLP and RIC, alone or combined, greatly enhanced antibody titers compared to L2 alone by more than an order of magnitude at all time points tested (FIG. 6). After one or two doses, the combined VLP/RIC treatment group outperformed both the VLP or RIC groups, reaching mean endpoint titers of >200,000, which represent a 700-fold increase over immunization with L2 alone (FIG. 6). After the third dose, both the VLP and combined VLP/RIC groups reached endpoint titers >1,300,000, a 2-fold increase over the RIC alone group. To determine the antibody subtypes produced by each treatment group, sera were assayed for L2-binding IgG1 and IgG2a. All four groups produced predominately IgG1 (FIG. 7, note dilutions). However, RIC and especially VLP-containing groups had an elevated ratio of IgG2a:IgG1 (>3-fold) compared to L2 alone (FIG. 7).

In vitro neutralization of HPV16 pseudovirions showed that the VLP and RIC groups greatly enhanced neutralization compared to L2 alone (FIG. 5, p<0.001). Additionally, VLP and RIC combined further enhanced neutralization activity ($5-fold, p<0.05) compared to either antigen alone, supporting the strong synergistic effect of delivering L2 by both platforms simultaneously.

In this study, by displaying amino acids 11-128 on the surface of plant-produced HBc VLPs, L2 antibody titers as high as those seen with L1 vaccines were generated (FIG. 6). Mice immunized with L2 alone had highly variable antibody titers, with titers spanning two orders of magnitude. By contrast, the other groups had much more homogenous antibody responses, especially the VLP-containing groups, which had no animals below an endpoint titer of 1:1,000,000 (FIG. 6). These results underscore the potential of HBc VLP and RIC to provide consistently potent immune responses against L2. Moreover, significant synergy of VLP and RIC systems was observed when the systems were delivered together, after one or two doses (FIG. 6). Since equivalent amounts of L2 were delivered with each dose, the enhanced antibody titer did not result from higher L2 doses. Rather, these data suggest that higher L2-specific antibody production may be due to augmented stimulation of L2-specific B cells by T-helper cells that were primed by RIC-induced antigen presenting cells. Although treatment with VLP and RIC alone reached similar endpoint titers as the combined VLP/RIC group after 3 doses, virus neutralization was substantially higher (>5-fold) in the combined group (FIG. 8). Together, these data indicate unique synergy exists when VLP and RIC are delivered together. Inventors have observed similarly significant synergistic enhancement of immunogenicity for a variety of other antigens.

Mice immunized with L2 alone had highly variable antibody titers, with titers spanning two orders of magnitude. By contrast, the VLP and VLP/RIC groups had much more homogenous antibody responses, with no animals below an endpoint titer of 1:1,000,000 (FIG. 6). These results underscore the potential of HBc VLP and RIC to provide consistently potent immune responses against L2.

Fc gamma receptors are present on immune cells and strongly impact antibody effector functions such as antibody-dependent cell-mediated cytotoxicity and complement-dependent cytotoxicity (Jefferis 2009). In mice, these interactions are controlled in part by IgG subtypes. IgG1 is associated with a Th2 response and has limited effector functions. By contrast, IgG2a is associated with a Th1 response and more strongly binds complement components (Neuberger and Raj ewsky 1981) and Fc receptors (Radaev 2002), enhancing effector functions and opsonophagocytosis by macrophages (Takai et al. 1994). Immunization with L2 alone was found to produce low levels of IgG2a, however immunization with RIC and VLP produced significant increases in IgG2a titers. VLP-containing groups in particular showed a 3-fold increase in the ratio of IgG2a to IgG1 antibodies (FIG. 7). Importantly, production of IgG2a is associated with successful clearance of a plethora of viral pathogens (Coutelier et al. 1988; Gerhard et al. 1997; Wilson et al. 2000; Markine-Goriaynoff and Coutelier 2002).

The glycosylation state of the Fc receptor also plays an important role in antibody function. Advances in glycoengineering have led to the development of transgenic plants with silenced fucosyl- and xylosyl-transferase genes capable of producing recombinant proteins with authentic human N-glycosylation (Strasser et al. 2008). Antibodies produced in this manner have more homogenous glycoforms, resulting in improved interaction with Fc gamma and complement receptors compared to the otherwise identical antibodies produced in mammalian cell culture systems (Zeitlin et al. 2011; Hiatt et al. 2014; Strasser et al. 2014; Marusic et al. 2017). As the known mechanisms by which RIC vaccines increase immunogenicity of an antigen depend in part on Fc and complement receptor binding, HPV L2 RIC were produced in transgenic plants with silenced fucosyl- and xylosyl-transferase. Consistent with these data, we found that L2 RIC strongly enhanced the immunogenicity of L2 (FIG. 6). However, yield suffered from insolubility of the RIC (FIG. 4C). We found that the 11-128 segment of L2 expresses very poorly on its own in plants and may be a contributing factor to poor L2 RIC yield. Importantly, we have produced very high yields of RIC with different antigen fusions. Thus, in some aspects, antibody fusion with a shorter segment of L2 could substantially improve the yield of L2 RIC.

e. Neutralization of HPV Pseudovirions

Neutralization of papilloma pseudoviruses (HPV 16, 18, and 58) with sera from mice immunized IP with HBc-L2 VLP and L2(11-128) showed neutralization of HPV 16 at titers of 400-1600 and 200-800, respectively (Table 1). More mice IP-immunized with HBc-L2 VLP had antisera that cross-neutralized HPV 18 and HPV 58 pseudoviruses, compared with mice immunized with L2(11-128). Anti-HBc-L2 VLP sera neutralized HPV 18 at titers of 400 and HPV 58 at titers ranging from 400-800 (Table 1), while anti-L2(11-128) sera neutralized HPV 18 at a titer of 200 and HPV 58 at a titer of 400 (Table 1). None of the sera from intranasal-immunized mice demonstrated neutralizing activity, consistent with lower anti-L2 titers for intranasal than for intraperitoneal immunized mice.

TABLE 1
L2-specific serum IgG and pseudovirus neutralization
titers from IP immunized mice
Neutralization of Pseudoviruses
ImmunogenSerum IgGHPV 16HPV 18HPV 58
HBc-L2>50,000 400
~70,0001600400400
>80,0001600400800
L2 (11-128)~8000 200
~12,000 400
~50,000 800200400

Patent 2024
3' Untranslated Regions 5' Untranslated Regions AA 149 Agrobacterium tumefaciens aluminum potassium sulfate aluminum sulfate Amino Acids Animals Animals, Transgenic Antibodies Antibody Formation Antigen-Presenting Cells Antigens B-Lymphocytes Bacteria Bromphenol Blue Buffers Cell Culture Techniques Cells Centrifugation Chromatography, Affinity Cloning Vectors Cold Temperature Combined Modality Therapy complement 1q receptor Complement Receptor Complex, Immune Complex Extracts Cytotoxicities, Antibody-Dependent Cell Cytotoxin Digestion DNA, A-Form DNA Sequence Edetic Acid Electron Microscopy Electroporation Enzyme-Linked Immunosorbent Assay Epitopes ethane sulfonate Fc Receptor Females Formvar Fucosyltransferase G-substrate Gamma Rays Genes Genes, vif Glycerin Goat Helix (Snails) Helper-Inducer T-Lymphocyte Homo sapiens Homozygote Horseradish Peroxidase Human papillomavirus 16 Human papillomavirus 18 Human Papilloma Virus Vaccine IGG-horseradish peroxidase IgG1 IgG2A Immune Sera Immunoglobulin Heavy Chains Immunoglobulins Immunologic Factors Institutional Animal Care and Use Committees Introns Inventors L2 protein, Human papillomavirus type 16 Light Macrophage Mammals Matrix Attachment Regions Mice, Inbred BALB C Microscopy Milk, Cow's Morpholinos Mus Necrosis Needles Nicotiana Oligonucleotide Primers Oligonucleotides Open Reading Frames Opsonophagocytosis Papilloma Pathogenicity Plant Development Plant Extracts Plant Leaves Plant Proteins Plants Plants, Transgenic polyacrylamide gels Polystyrenes polyvinylidene fluoride prisma Protein Glycosylation Proteins Punctures Rabbits Receptors, IgG Recombinant Proteins Replicon Reproduction Response, Immune Ribulose-Bisphosphate Carboxylase Large Subunit Satellite Viruses SDS-PAGE Serum Serum Albumin, Bovine Sodium Ascorbate Sodium Chloride sodium phosphate Specimen Collection Stars, Celestial Strains Sucrose Sulfate, Magnesium Syringes System, Immune Technique, Dilution Tissue, Membrane Tissues Transferase Transmission Electron Microscopy Triton X-100 Tromethamine Tween 20 Ultraviolet Rays uranyl acetate Vaccination Vaccines Vaccines, Recombinant Virion Viroids Virus Vision Western Blotting xylosyltransferase
Transmission electron microscopy (TEM) was performed to detect the size and morphology of EV samples. Isolated EV samples were deposited onto formvar/silicone monoxide-coated 200 mesh copper grids (Electro-microscopy Sciences) for 2–3 min, followed by fixation with 4% formalin and washed twice with water. The samples were contrasted with 2% uranyl acetate (w/v). Then, the grids were visualized with transmission electron microscope (Tecnai G2 Spirit TEM, Zeiss, Oberkochen, Germany) at 120 kV.
Publication 2023
Copper Formalin Formvar Microscopy Silicones Transmission Electron Microscopy uranyl acetate
Bacteria were grown to mid-log phase, and single cell suspensions were generated in PBS as described above. Bacteria were incubated in 4% PFA for 30 min at 37 °C followed by centrifugation at 3000 x g and resuspension in PBS. For ultrastructural analyses using ultrathin cross-sections through bacteria, samples were further fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella Inc, Redding, CA) in 100 mM sodium cacodylate buffer, pH 7.2 for 2 h at RT and then overnight at 4 °C. Samples were washed in sodium cacodylate buffer at RT and postfixed in 2% osmium tetroxide (Ted Pella Inc) for 1 hr at RT. Samples were then rinsed in dH20, dehydrated in a graded series of ethanol, and embedded in Eponate 12 resin (Ted Pella Inc). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc, Bannockburn, IL), stained with uranyl acetate and lead citrate, and viewed on a JEOL 1200 EX transmission electron microscope (JEOL USA Inc, Peabody, MA) equipped with an AMT 8-megapixel digital camera and AMT Image Capture Engine V602 software (Advanced Microscopy Techniques, Woburn, MA).
For imaging of whole bacteria, after bacterial samples were fixed with 4% PFA, they were allowed to adsorb onto freshly glow discharged formvar/carbon-coated copper grids for 10 min. Grids were then washed in dH2O and stained with 1% aqueous uranyl acetate (Ted Pella Inc, Redding, CA) for 1 min. Excess liquid was gently wicked off, and grids were allowed to air dry. Samples were viewed by transmission electron microscopy as described above. TEM images were then used to further analyze the bacteria using ImageJ (version 1.53q). Single bacteria and clumps of bacteria which were completely contained within the image borders were further analyzed for each of the preparations. For each single bacteria or clump, a measurement was then taken of the thickness of the capsular layer. Lines were drawn perpendicular to the middle of the long axis of the bacteria, capturing the black-staining outer component.
Publication 2023
Bacteria Buffers Cacodylate Capsule Carbon Cells Centrifugation Citrates Copper Edema Epistropheus Ethanol Fingers Formvar Glutaral Microscopy Osmium Tetroxide paraform Resins, Plant Sodium Transmission Electron Microscopy Ultramicrotomy uranyl acetate
Small drops of PRP were deposited on formvar-coated grids (Electron Microscopy Sciences) for 1 to 5 minutes, rinsed in a drop of distilled water (10-15 seconds), dried from the edge with pieces of a filter paper and air dried during 1 minute with gentle shaking and without further chemical fixation or poststaining with contrasting agents. Platelet dense granules were counted with a JEOL JEM1400 transmission electron microscope equipped with a Gatan Orius 600 camera and DigitalMicrograph software [15 ].
Publication 2023
Blood Platelets Contrast Media Cytoplasmic Granules Electron Microscopy Formvar Neoplasm Metastasis Strains Transmission Electron Microscopy
TEM analysis: 4 μl of EVs pellet samples isolated from NP, HP and GVC PPP were applied to formvar-carbon-coated, glow-discharged EM grids (EMS) and negatively stained with 1% uranyl acetate. Digital electron micrographs were acquired using a Thermo Fisher Scientific Tecnai T12 transmission electron microscope operating at 120 kV and equipped with a bottom mounted TVIPS TemCam-XF416 4k x 4k CMOS camera.
Publication 2023
Carbon Chronic multifocal osteomyelitis Formvar Transmission Electron Microscopy uranyl acetate

Top products related to «Formvar»

Sourced in Japan, United States, Germany, United Kingdom, France, Spain
The JEM-1400 is a transmission electron microscope (TEM) produced by JEOL. It is designed to provide high-quality imaging and analysis of a wide range of materials at the nanoscale level. The JEM-1400 offers a maximum accelerating voltage of 120 kV and features advanced optics and detectors to enable detailed examination of samples.
Sourced in Japan, United States, Germany, United Kingdom, China, France
The Hitachi H-7650 is a transmission electron microscope (TEM) designed for high-resolution imaging of materials. It provides a core function of nanoscale imaging and analysis of a wide range of samples.
Sourced in Japan, United States, Germany, China, United Kingdom
The HT7700 is a high-resolution transmission electron microscope (TEM) designed for materials analysis and characterization. It provides advanced imaging and analytical capabilities for a wide range of applications in materials science, nanotechnology, and life sciences. The core function of the HT7700 is to enable high-resolution, high-contrast imaging and elemental analysis of nanoscale structures and materials.
Sourced in Japan, United States, Germany, France, United Kingdom
The JEM-1400 is a transmission electron microscope (TEM) manufactured by JEOL. It is designed to produce high-resolution images of small-scale structures and materials. The JEM-1400 uses an electron beam to illuminate and magnify samples, allowing users to study their internal structure and composition at the nanometer scale.
Sourced in Japan, United States, Germany, Spain, China
The JEM-1010 is a transmission electron microscope (TEM) manufactured by JEOL. It is designed for high-resolution imaging of a wide range of samples. The JEM-1010 provides a maximum accelerating voltage of 100 kV and offers a high level of stability and reliability for routine imaging applications.
Sourced in Japan, United States, Germany, France
The JEM-1011 is a transmission electron microscope (TEM) manufactured by JEOL. It is designed for high-resolution imaging of various materials and samples. The JEM-1011 provides a maximum accelerating voltage of 100 kV and can achieve a resolution of up to 0.45 nm.
Sourced in Japan, United States, Germany, United Kingdom, India
The JEM-1400Plus is a transmission electron microscope (TEM) manufactured by JEOL. It is designed for high-resolution imaging and analysis of a wide range of samples. The JEM-1400Plus provides stable and reliable performance for various applications in materials science, biological research, and other related fields.
Sourced in United States, Germany, Japan, United Kingdom, Panama
Uranyl acetate is a chemical compound commonly used in electron microscopy as a negative stain. It is employed to enhance the contrast of biological samples, such as proteins, nucleic acids, and cellular structures, during the imaging process. Uranyl acetate provides high electron density, allowing for the visualization of fine details within the specimen.
Sourced in Germany, United States, Japan
The Libra 120 is a transmission electron microscope (TEM) designed and manufactured by Zeiss. It is a high-performance instrument capable of providing high-resolution imaging and analysis of samples at the nanoscale level. The Libra 120 offers stable and consistent operation for various applications in materials science, life science, and nanotechnology research.
Sourced in Japan, United States, Germany, United Kingdom, France
The JEM-1230 is a transmission electron microscope (TEM) manufactured by JEOL. It is designed to provide high-quality imaging and analysis of a wide range of materials. The JEM-1230 operates at an accelerating voltage of 120 kV and offers a resolution of 0.2 nanometers.

More about "Formvar"

Formvar is a widely used synthetic polymer in the field of electron microscopy.
It serves as a thin, transparent, and stable support film for mounting samples, enabling high-resolution imaging.
Formvar's ability to withstand the high-vacuum conditions of electron microscopes makes it a popular choice in various biological and material science applications.
Researchers can leverage the PubCompare.ai platform to quickly identify the optimal Formvar protocols and products, streamlining their research process and enhancing accuracy and reproducibility.
This AI-driven platform allows users to locate the best Formvar-related protocols from literature, preprints, and patents using advanced comparisons, saving time and improving research outcomes.
Electron microscopes, such as the JEM-1400, H-7650, HT7700, JEM-1400 transmission electron microscope, JEM-1010, JEM-1011, and JEM-1400Plus, commonly utilize Formvar as a support film.
Additionally, techniques like uranyl acetate staining and microscopes like the Libra 120 and JEM-1230 may be employed in conjunction with Formvar-based sample preparation.
By leveraging the insights and capabilities of PubCompare.ai, researchers can streamline their workflow, enhance the accuracy and reproducibility of their findings, and stay at the forefront of electron microscopy techniques and protocols.