The largest database of trusted experimental protocols
> Chemicals & Drugs > Organic Chemical > Bromphenol Blue

Bromphenol Blue

Bromphenol Blue is a synthetic organic compound commonly used as a pH indicator and analytical reagent in various scientific and medical applications.
It is a blue-colored dye that changes color based on the pH of the solution, making it useful for monitoring acidity levels and detecting pH changes in experiments.
Bromphenol Blue has a wide range of applications, including its use as a stain in biochemistry, a colorimetric indicator in analytical chemistry, and a tool for visualizing protein separation in electrophoresis.
Researchers can leverage the power of AI-driven comparisons to optimize Bromphenol Blue protocols, explore pre-prints, patents, and scientific literature, and find the best products and protocols to streamline their research and improve their results.

Most cited protocols related to «Bromphenol Blue»

Brucella DNA was prepared as previously described [27 (link)]. PCR amplification was performed in a total volume of 15 μl containing 1ng of DNA, 1× PCR Reaction Buffer, 1 U of Taq DNA polymerase (Qbiogen, Illkirch, France), 200 μM of each deoxynucleotide triphosphate, and 0.3 μM of each flanking primer as described previously [15 (link)].
Amplifications were performed in a MJ Research PTC200 thermocycler. An initial denaturation step at 96°C for 5 minutes was followed by 30 cycles of denaturation at 96°C for 30 s, primer annealing at 60°C for 30 s, and elongation at 70°C for 1 min. The final extension step was performed at 70°C for 5 min.
Two to five microliters of the amplification product were loaded on a 3% standard agarose gel for analyzing tandem repeats with a unit length shorter than 10 bp and on a 2% standard agarose gel for all others, and run under a voltage of 8 V/cm until the bromophenol blue dye had reached the 20 cm position. Gels were stained with ethidium bromide, visualized under UV light, and photographed (Vilber Lourmat, Marnes-la-Vallée, France). A 100-bp and a 20-bp ladder (EZ Load 100 pb or 20 bp PCR Molecular Ruler, Biorad, Marnes-la-Coquette, France) were used as molecular size markers depending on the tandem repeat unit length. Gel images were managed using the Bionumerics software package (version 4.0, Applied-Maths, Belgium).
Full text: Click here
Publication 2006
Biological Markers Bromphenol Blue Brucella Buffers Ethidium Bromide Oligonucleotide Primers Sepharose Tandem Repeat Sequences Taq Polymerase triphosphate Ultraviolet Rays
Detailed descriptions of the methods are provided in Online Data Supplement at “http://hyper.ahajournals.org.”
In order to test whether the combination treatment of single elastase injection and pharmacologically-induced hypertension can cause the formation of intracranial aneurysms in mice, we treated C57BL/6J mice (8–10 weeks old) with a single stereotaxic injection of elastase at the right basal cistern, immediately followed by induction of systemic hypertension with continuous injection of angiotensin-II. After two weeks, we sacrificed the mice and perfused the animals with a bromophenol blue dye and gelatin mixture.
Our preliminary study indicated a wide variation in vessel diameter for the Circle of Willis and its major branches in mice. In order to have a conservative and consistent control for our experiment, we used the diameter of the basilar artery–one of the larger vessels in the brain circulation with relatively little variation—as a reference blood vessel. Aneurysms were operationally defined as a localized outward bulging of the vascular wall whose diameter is greater than 150% of the basilar artery diameter. The Circle of Willis or its major primary branches were assessed by two investigators in a blinded manner.
To assess the relationship between the elastase dose and the incidence of aneurysms, four groups of mice were prepared: Group 1: 35 milli-units of heat-inactivated elastase, Group 2: PBS (n=10), Group 3: 3.5 milli-units of elastase (n=10). Group 4: 17.5 milli-units of elastase (n=20), and Group 5: 35 milli-units of elastase (n = 44). Angiotensin-II was administered at 1000 ng/kg/min for two weeks in all groups.
To assess the relationship between the angiotensin-II concentration and the incidence of aneurysms, three groups of mice were prepared: Group 1: continuous infusion of PBS via osmotic pump (n=10), Group 2: 500 ng/kg/min of angiotensin-II (n=10), Group 3: 1000 ng/kg/min of angiotensin-II (n=44). This group (Group 3) is the same as the Group 5 in the above-mentioned experiment testing the dose dependency of elastase effects. 35 milli-units of elastase were administered to all groups.
Publication 2009
Aneurysm Angiotensin II Animals Basilar Artery Blood Vessel Brain Bromphenol Blue Circle of Willis Dietary Supplements Gelatins High Blood Pressures Intracranial Aneurysm Mice, House Mice, Inbred C57BL Osmosis Pancreatic Elastase

Protocol full text hidden due to copyright restrictions

Open the protocol to access the free full text link

Publication 2011
Bromphenol Blue Buffers Electrophoresis Glycerin Immobilon Mitochondria Proteins Sepharose Tissue, Membrane
Protein concentration was determined using a BCA assay (Pierce). The indicated amounts of antibodies and lysates were incubated for 1 h, after that 10 to 25 μl protein G agarose beads (Immobilized Protein G, Pierce) were added and immunoprecipitation was performed overnight. All steps were performed with mild agitation at 4°C. For mass spectrometric analysis, lysates were precleared by incubation with the same amount of beads for 2 h before the antibody was added. The supernatants of the immunoprecipitations were kept for analysis and the beads were washed either twice with PBS for western blot analysis or three times with RIPA buffer for mass spectrometric analysis. 4x reducing SDS Loading Dye (500 mM Tris HCl, pH 6.8, 8% SDS, 40% glycerine, 20% β-mercaptoethanol, 5 mg/ml bromophenol blue) was added to the beads as well as to the lysates and the supernatants and samples were incubated at either 65°C or 99°C for 5 min or 10–20 min, respectively, before they were separated by SDS PAGE using a 8% Laemmli gel [19 (link)]. For western blot analysis, proteins were transferred via a semi-dry procedure on polyvinylidene difluoride membranes (Pall Corporation), blocked for 1 h at RT with 5% milk powder in PBST (PBS, 0.1% Tween 20) and incubated with JB1A (0.1 μg/ml) overnight at 4°C. Membranes were either incubated with anti-mouse HRP or anti-mouse Alexa Fluor 680 (both 1 : 10000) for 1 h at RT. Membranes treated with anti-mouse Alexa Fluor 680 were scanned with a fluorescence scanner (Odyssey, LICOR) using excitation/emission wavelengths of 700 and 800 nm, whereas signals on anti-mouse HRP incubated membranes were detected with chemiluminescence solution (ECL, GE Healthcare). Quantitation of immunoblot analysis was performed using the software ImageJ [20 ]. Silver staining was performed using a modified protocol of Gharahdaghi et al. [21 (link)]. Briefly, gels were fixed with 10% acetic acid/10% methanol, washed with water and sensitized with 1 μg/ml dithiothreitol for 15 min. Gels were incubated in 0.1% (w/v) silver nitrate for 15 min and developed with 0.02% (w/v) paraformaldehyde in 3% (w/v) potassium carbonate until the desired staining had occurred. The reaction was stopped by addition of acetic acid.
Publication 2010
2-Mercaptoethanol Acetic Acid Antibodies Biological Assay Bromphenol Blue Buffers Chemiluminescence Dithiothreitol Fluorescence G-substrate Gels Glycerin Immunoblotting Immunoglobulins Immunoprecipitation Mass Spectrometry Methanol Mice, House Milk, Cow's paraform polyvinylidene fluoride potassium carbonate Powder Proteins Radioimmunoprecipitation Assay SDS-PAGE Sepharose Silver Nitrate Tissue, Membrane Tromethamine Tween 20 Western Blot

Protocol full text hidden due to copyright restrictions

Open the protocol to access the free full text link

Publication 2011
Acetic Acid Biological Assay Bromphenol Blue Buffers Cathepsins Cells Centrifugation Coomassie blue Edetic Acid Egtazic Acid Elastin Electrophoresis Enzymes Gelatins Gels Glycerin Glycerophosphates Homo sapiens Isopropyl Alcohol leupeptin Orthovanadate polyacrylamide gels Proteins Sodium Sodium Acetate Sodium Chloride sodium phosphate Stains Tissues Triton X-100 Tromethamine Tween 20

Most recents protocols related to «Bromphenol Blue»

Example 1

a. Materials and Methods

i. Vector Construction

1. Virus-Like Particle

As most broadly neutralizing HPV antibodies are derived from the highly conserved N-terminal region of L2, amino acids 14-122 of HPV16 L2 were used to create HBc VLPs. L2 with flanking linker regions was inserted into the tip of the a-helical spike of an HBc gene copy which was fused to another copy of HBc lacking the L2 insert. This arrangement allows the formation of HBc dimers that contain only a single copy of L2, increasing VLP stability (Peyret et al. 2015). This heterodimer is referred to as HBche-L2. A dicot plant-optimized HPV16 L2 coding sequence was designed based upon the sequence of GenBank Accession No. CAC51368.1 and synthesized in vitro using synthetic oligonucleotides by the method described (Stemmer et al., 1995). The plant-optimized L2 nucleotide sequence encoding residues 1-473 is posted at GenBank Accession No. KC330735. PCR end-tailoring was used to insert Xbal and SpeI sites flanking the L2 aa 14-122 using primers L2-14-Xba-F (SEQ ID NO. 1: CGTCTAGAGTCCGCAACCCAACTTTACAAG) and L2-122-Spe-R (SEQ ID NO. 2: G GGACTAGTTGGGGCACCAGCATC). The SpeI site was fused to a sequence encoding a 6His tag, and the resulting fusion was cloned into a geminiviral replicon vector (Diamos, 2016) to produce pBYe3R2K2Mc-L2(14-122)6H.

The HBche heterodimer VLP system was adapted from Peyret et al (2015). Using the plant optimized HBc gene (Huang et al., 2009), inventors constructed a DNA sequence encoding a dimer comprising HBc aa 1-149, a linker (G2S)5G (SEQ ID NO. 39), HBc aa 1-77, a linker GT(G4S)2 (SEQ ID NO. 40), HPV-16 L2 aa 14-122, a linker (GGS)2GSSGGSGG (SEQ ID NO. 41), and HBc aa 78-176. The dimer sequence was generated using multiple PCR steps including overlap extensions and insertion of BamHI and SpeI restriction sites flanking the L2 aa 14-122, using primers L2-14-Bam-F (SEQ ID NO. 3: CAGGATCCGCAACC CAACTTTACAAGAC) and L2-122-Spe-R (SEQ ID NO. 2). The HBche-L2 coding sequence was inserted into a geminiviral replicon binary vector pBYR2eK2M (FIG. 3), which includes the following elements: CaMV 35S promoter with duplicated enhancer (Huang et al., 2009), 5′ UTR of N. benthamiana psaK2 gene (Diamos et al., 2016), intron-containing 3′ UTR and terminator of tobacco extensin (Rosenthal et al, 2018), CaMV 35S 3′ terminator (Rosenthal et al, 2018), and Rb7 matrix attachment region (Diamos et al., 2016).

2. Recombinant Immune Complex

The recombinant immune complex (RIC) vector was adapted from Kim et al., (2015). The HPV-16 L2 (aa 14-122) segment was inserted into the BamHI and SpeI sites of the gene encoding humanized mAb 6D8 heavy chain, resulting in 6D8 epitope-tagged L2. The heavy chain fusion was inserted into an expression cassette linked to a 6D8 kappa chain expression cassette, all inserted into a geminiviral replicon binary vector (FIG. 3, RIC vector). Both cassettes contain CaMV 35S promoter with duplicated enhancer (Huang et al., 2009), 5′ UTR of N. benthamiana psaK2 gene (Diamos et al., 2016), intron-containing 3′ UTR and terminator of tobacco extensin (Rosenthal et al, 2018), and Rb7 matrix attachment region (Diamos et al., 2016).

ii. Agroinfiltration of Nicotiana benthamiana Leaves

Binary vectors were separately introduced into Agrobacterium tumefaciens EHA105 by electroporation. The resulting strains were verified by restriction digestion or PCR, grown overnight at 30° C., and used to infiltrate leaves of 5- to 6-week-old N. benthamiana maintained at 23-25° C. Briefly, the bacteria were pelleted by centrifugation for 5 minutes at 5,000 g and then resuspended in infiltration buffer (10 mM 2-(N-morpholino)ethanesulfonic acid (MES), pH 5.5 and 10 mM MgSO4) to OD600=0.2, unless otherwise described. The resulting bacterial suspensions were injected by using a syringe without needle into leaves through a small puncture (Huang et al. 2004). Plant tissue was harvested after 5 DPI, or as stated for each experiment. Leaves producing GFP were photographed under UV illumination generated by a B-100AP lamp (UVP, Upland, CA).

iii. Protein Extraction

Total protein extract was obtained by homogenizing agroinfiltrated leaf samples with 1:5 (w:v) ice cold extraction buffer (25 mM sodium phosphate, pH 7.4, 100 mM NaCl, 1 mM EDTA, 0.1% Triton X-100, 10 mg/mL sodium ascorbate, 0.3 mg/mL PMSF) using a Bullet Blender machine (Next Advance, Averill Park, NY) following the manufacturer's instruction. To enhance solubility, homogenized tissue was rotated at room temperature or 4° C. for 30 minutes. The crude plant extract was clarified by centrifugation at 13,000 g for 10 minutes at 4° C. Necrotic leaf tissue has reduced water weight, which can lead to inaccurate measurements based on leaf mass. Therefore, extracts were normalized based on total protein content by Bradford protein assay kit (Bio-Rad) with bovine serum albumin as standard.

iv. SDS-PAGE and Western Blot

Clarified plant protein extract was mixed with sample buffer (50 mM Tris-HCl, pH 6.8, 2% SDS, 10% glycerol, 0.02% bromophenol blue) and separated on 4-15% polyacrylamide gels (Bio-Rad). For reducing conditions, 0.5M DTT was added, and the samples were boiled for 10 minutes prior to loading. Polyacrylamide gels were either transferred to a PVDF membrane or stained with Coomassie stain (Bio-Rad) following the manufacturer's instructions. For L2 detection, the protein transferred membranes were blocked with 5% dry milk in PBST (PBS with 0.05% tween-20) overnight at 4° C. and probed with polyclonal rabbit anti-L2 diluted 1:5000 in 1% PBSTM, followed by goat anti-rabbit horseradish peroxidase conjugate (Sigma). Bound antibody was detected with ECL reagent (Amersham).

v. Immunization of Mice and Sample Collection

All animals were handled in accordance to the Animal Welfare Act and Arizona State University IACUC. Female BALB/C mice, 6-8 weeks old, were immunized subcutaneously with purified plant-expressed L2 (14-122), HBche-L2 VLP, L2 RIC, or PBS mixed 1:1 with Imject® Alum (Thermo Scientific, Rockford, IL). In all treatment groups, the total weight of antigen was set to deliver an equivalent 5 μg of L2. Doses were given on days 0, 21, and 42. Serum collection was done as described (Santi et al. 2008) by submandibular bleed on days 0, 21, 42, and 63.

vi. Antibody Measurements

Mouse antibody titers were measured by ELISA. Bacterially-expressed L2 (amino acids 11-128) was bound to 96-well high-binding polystyrene plates (Corning), and the plates were blocked with 5% nonfat dry milk in PBST. After washing the wells with PBST (PBS with 0.05% Tween 20), the diluted mouse sera were added and incubated. Mouse antibodies were detected by incubation with polyclonal goat anti-mouse IgG-horseradish peroxidase conjugate (Sigma). The plate was developed with TMB substrate (Pierce) and the absorbance was read at 450 nm. Endpoint titers were taken as the reciprocal of the lowest dilution which produced an OD450 reading twice the background. IgG1 and IgG2a antibodies were measured with goat-anti mouse IgG1 or IgG2a horseradish peroxidase conjugate.

vii. Electron Microscopy

Purified samples of HBche or HBche-L2 were initially incubated on 75/300 mesh grids coated with formvar. Following incubation, samples were briefly washed twice with deionized water then negatively stained with 2% aqueous uranyl acetate. Transmission electron microscopy was performed with a Phillips CM-12 microscope, and images were acquired with a Gatan model 791 CCD camera.

viii. Statistical Analysis

The significance of vaccine treatments and virus neutralization was measured by non-parametric Mann-Whitney test using GraphPad prism software. Two stars (**) indicates p values <0.05. Three stars (***) indicates p values <0.001.

b. Design and Expression of HBc VLPs and RIC Displaying HPV16 L2

BeYDV plant expression vectors (FIG. 3) expressing either the target VLP HBche-L2, or L2 and HBche alone as controls, were agroinfiltrated into the leaves of N. benthamiana and analyzed for VLP production. After 4-5 days post infiltration (DPI), leaves displayed only minor signs of tissue necrosis, indicating that the VLP was well-tolerated by the plants (FIG. 4A). Leaf extracts analyzed by reducing SDS-PAGE showed an abundant band near the predicted size of 51 kDa for HBche-L2, just above the large subunit of rubisco (RbcL). HBche was detected around the predicted size of 38 kDa (FIG. 4B). Western blot probed with anti-L2 polyclonal serum detected a band for HBche-L2 at ˜51 kDa (FIG. 4B). These results indicate that this plant system is capable of producing high levels of L2-containing HBc VLP.

To express L2-containing MC, amino acids 14-122 of HPV16 L2 were fused with linker to the C-terminus of the 6D8 antibody heavy chain and tagged with the 6D8 epitope (Kim et al. 2015). A BeYDV vector (FIG. 3) expressing both the L2-fused 6D8 heavy chain and the light chain was agroinfiltrated into leaves of N. benthamiana and analyzed for RIC production. To create more homogenous human-type glycosylation, which has been shown to improve antibody Fc receptor binding in vivo, transgenic plants silenced for xylosyltransferase and fucosyltransferase were employed (Castilho and Steinkellner 2012). By western blot, high molecular weight bands >150 kDa suggestive of RIC formation were observed (FIG. 4C). Expression of soluble L2 RIC was lower than HBche-L2 due to relatively poor solubility of the RIC (FIG. 4C).

After rigorous genetic optimization, the N. benthamiana system is capable of producing very high levels of recombinant protein, up to 30-50% of the total soluble plant protein, in 4-5 days (Diamos et al. 2016). Using this system, we produced and purified milligram quantities of fully assembled and potently immunogenic HBc VLPs displaying HPV L2 through a simple one-step purification process (FIGS. 4A-4C and 6).

c. Purification and Characterization of HBche-L2 and L2 RIC

To assess the assembly of HBc-L2 VLP, clarified plant extracts containing either HBche-L2 or HBche were analyzed by sucrose gradient sedimentation. HBche-L2 sedimented largely with HBche, which is known to form VLP, though a small increase in density was observed with HBche-L2, perhaps due to the incorporation of L2 into the virus particle (FIG. 5A). To demonstrate particle formation, sucrose fractions were examined by electron microscopy. Both HBche and HBche-L2 formed ˜30 nm particles, although the appearance of HBche-L2 VLP suggested slightly larger, fuller particles (FIGS. 5C and 5D). As most plant proteins do not sediment with VLP, pooling peak sucrose fractions resulted in >95% pure HBche-L2 (FIG. 5B), yielding sufficient antigen (>3 mg) for vaccination from a single plant leaf.

L2 RIC was purified from plant tissue by protein G affinity chromatography. By SDS-PAGE, an appropriately sized band was visible >150 kDa that was highly pure (FIG. 5B). Western blot confirmed the presence of L2 in this band, indicating proper RIC formation (FIG. 5B). L2 RIC bound to human complement C1q receptor with substantially higher affinity compared to free human IgG standard, suggesting proper immune complex formation (FIG. 5E).

d. Mouse Immunization with HBche-L2 and L2 RIC

Groups of Balb/c mice (n=8) were immunized, using alum as adjuvant, with three doses each of 5 μg L2 delivered as either L2 alone, HBche-L2 VLP, L2 RIC, or a combination of half VLP and half RIC. VLP and RIC, alone or combined, greatly enhanced antibody titers compared to L2 alone by more than an order of magnitude at all time points tested (FIG. 6). After one or two doses, the combined VLP/RIC treatment group outperformed both the VLP or RIC groups, reaching mean endpoint titers of >200,000, which represent a 700-fold increase over immunization with L2 alone (FIG. 6). After the third dose, both the VLP and combined VLP/RIC groups reached endpoint titers >1,300,000, a 2-fold increase over the RIC alone group. To determine the antibody subtypes produced by each treatment group, sera were assayed for L2-binding IgG1 and IgG2a. All four groups produced predominately IgG1 (FIG. 7, note dilutions). However, RIC and especially VLP-containing groups had an elevated ratio of IgG2a:IgG1 (>3-fold) compared to L2 alone (FIG. 7).

In vitro neutralization of HPV16 pseudovirions showed that the VLP and RIC groups greatly enhanced neutralization compared to L2 alone (FIG. 5, p<0.001). Additionally, VLP and RIC combined further enhanced neutralization activity ($5-fold, p<0.05) compared to either antigen alone, supporting the strong synergistic effect of delivering L2 by both platforms simultaneously.

In this study, by displaying amino acids 11-128 on the surface of plant-produced HBc VLPs, L2 antibody titers as high as those seen with L1 vaccines were generated (FIG. 6). Mice immunized with L2 alone had highly variable antibody titers, with titers spanning two orders of magnitude. By contrast, the other groups had much more homogenous antibody responses, especially the VLP-containing groups, which had no animals below an endpoint titer of 1:1,000,000 (FIG. 6). These results underscore the potential of HBc VLP and RIC to provide consistently potent immune responses against L2. Moreover, significant synergy of VLP and RIC systems was observed when the systems were delivered together, after one or two doses (FIG. 6). Since equivalent amounts of L2 were delivered with each dose, the enhanced antibody titer did not result from higher L2 doses. Rather, these data suggest that higher L2-specific antibody production may be due to augmented stimulation of L2-specific B cells by T-helper cells that were primed by RIC-induced antigen presenting cells. Although treatment with VLP and RIC alone reached similar endpoint titers as the combined VLP/RIC group after 3 doses, virus neutralization was substantially higher (>5-fold) in the combined group (FIG. 8). Together, these data indicate unique synergy exists when VLP and RIC are delivered together. Inventors have observed similarly significant synergistic enhancement of immunogenicity for a variety of other antigens.

Mice immunized with L2 alone had highly variable antibody titers, with titers spanning two orders of magnitude. By contrast, the VLP and VLP/RIC groups had much more homogenous antibody responses, with no animals below an endpoint titer of 1:1,000,000 (FIG. 6). These results underscore the potential of HBc VLP and RIC to provide consistently potent immune responses against L2.

Fc gamma receptors are present on immune cells and strongly impact antibody effector functions such as antibody-dependent cell-mediated cytotoxicity and complement-dependent cytotoxicity (Jefferis 2009). In mice, these interactions are controlled in part by IgG subtypes. IgG1 is associated with a Th2 response and has limited effector functions. By contrast, IgG2a is associated with a Th1 response and more strongly binds complement components (Neuberger and Raj ewsky 1981) and Fc receptors (Radaev 2002), enhancing effector functions and opsonophagocytosis by macrophages (Takai et al. 1994). Immunization with L2 alone was found to produce low levels of IgG2a, however immunization with RIC and VLP produced significant increases in IgG2a titers. VLP-containing groups in particular showed a 3-fold increase in the ratio of IgG2a to IgG1 antibodies (FIG. 7). Importantly, production of IgG2a is associated with successful clearance of a plethora of viral pathogens (Coutelier et al. 1988; Gerhard et al. 1997; Wilson et al. 2000; Markine-Goriaynoff and Coutelier 2002).

The glycosylation state of the Fc receptor also plays an important role in antibody function. Advances in glycoengineering have led to the development of transgenic plants with silenced fucosyl- and xylosyl-transferase genes capable of producing recombinant proteins with authentic human N-glycosylation (Strasser et al. 2008). Antibodies produced in this manner have more homogenous glycoforms, resulting in improved interaction with Fc gamma and complement receptors compared to the otherwise identical antibodies produced in mammalian cell culture systems (Zeitlin et al. 2011; Hiatt et al. 2014; Strasser et al. 2014; Marusic et al. 2017). As the known mechanisms by which RIC vaccines increase immunogenicity of an antigen depend in part on Fc and complement receptor binding, HPV L2 RIC were produced in transgenic plants with silenced fucosyl- and xylosyl-transferase. Consistent with these data, we found that L2 RIC strongly enhanced the immunogenicity of L2 (FIG. 6). However, yield suffered from insolubility of the RIC (FIG. 4C). We found that the 11-128 segment of L2 expresses very poorly on its own in plants and may be a contributing factor to poor L2 RIC yield. Importantly, we have produced very high yields of RIC with different antigen fusions. Thus, in some aspects, antibody fusion with a shorter segment of L2 could substantially improve the yield of L2 RIC.

e. Neutralization of HPV Pseudovirions

Neutralization of papilloma pseudoviruses (HPV 16, 18, and 58) with sera from mice immunized IP with HBc-L2 VLP and L2(11-128) showed neutralization of HPV 16 at titers of 400-1600 and 200-800, respectively (Table 1). More mice IP-immunized with HBc-L2 VLP had antisera that cross-neutralized HPV 18 and HPV 58 pseudoviruses, compared with mice immunized with L2(11-128). Anti-HBc-L2 VLP sera neutralized HPV 18 at titers of 400 and HPV 58 at titers ranging from 400-800 (Table 1), while anti-L2(11-128) sera neutralized HPV 18 at a titer of 200 and HPV 58 at a titer of 400 (Table 1). None of the sera from intranasal-immunized mice demonstrated neutralizing activity, consistent with lower anti-L2 titers for intranasal than for intraperitoneal immunized mice.

TABLE 1
L2-specific serum IgG and pseudovirus neutralization
titers from IP immunized mice
Neutralization of Pseudoviruses
ImmunogenSerum IgGHPV 16HPV 18HPV 58
HBc-L2>50,000 400
~70,0001600400400
>80,0001600400800
L2 (11-128)~8000 200
~12,000 400
~50,000 800200400

Full text: Click here
Patent 2024
3' Untranslated Regions 5' Untranslated Regions AA 149 Agrobacterium tumefaciens aluminum potassium sulfate aluminum sulfate Amino Acids Animals Animals, Transgenic Antibodies Antibody Formation Antigen-Presenting Cells Antigens B-Lymphocytes Bacteria Bromphenol Blue Buffers Cell Culture Techniques Cells Centrifugation Chromatography, Affinity Cloning Vectors Cold Temperature Combined Modality Therapy complement 1q receptor Complement Receptor Complex, Immune Complex Extracts Cytotoxicities, Antibody-Dependent Cell Cytotoxin Digestion DNA, A-Form DNA Sequence Edetic Acid Electron Microscopy Electroporation Enzyme-Linked Immunosorbent Assay Epitopes ethane sulfonate Fc Receptor Females Formvar Fucosyltransferase G-substrate Gamma Rays Genes Genes, vif Glycerin Goat Helix (Snails) Helper-Inducer T-Lymphocyte Homo sapiens Homozygote Horseradish Peroxidase Human papillomavirus 16 Human papillomavirus 18 Human Papilloma Virus Vaccine IGG-horseradish peroxidase IgG1 IgG2A Immune Sera Immunoglobulin Heavy Chains Immunoglobulins Immunologic Factors Institutional Animal Care and Use Committees Introns Inventors L2 protein, Human papillomavirus type 16 Light Macrophage Mammals Matrix Attachment Regions Mice, Inbred BALB C Microscopy Milk, Cow's Morpholinos Mus Necrosis Needles Nicotiana Oligonucleotide Primers Oligonucleotides Open Reading Frames Opsonophagocytosis Papilloma Pathogenicity Plant Development Plant Extracts Plant Leaves Plant Proteins Plants Plants, Transgenic polyacrylamide gels Polystyrenes polyvinylidene fluoride prisma Protein Glycosylation Proteins Punctures Rabbits Receptors, IgG Recombinant Proteins Replicon Reproduction Response, Immune Ribulose-Bisphosphate Carboxylase Large Subunit Satellite Viruses SDS-PAGE Serum Serum Albumin, Bovine Sodium Ascorbate Sodium Chloride sodium phosphate Specimen Collection Stars, Celestial Strains Sucrose Sulfate, Magnesium Syringes System, Immune Technique, Dilution Tissue, Membrane Tissues Transferase Transmission Electron Microscopy Triton X-100 Tromethamine Tween 20 Ultraviolet Rays uranyl acetate Vaccination Vaccines Vaccines, Recombinant Virion Viroids Virus Vision Western Blotting xylosyltransferase
After incubation and pharmacological treatments as indicated, cells were rapidly cooled by washing with ice-cold PBS and then lysed in 2X-Laemmlli Sample buffer (0.5 M Tris pH 6.8, glycerol, 10% SDS) supplemented with 1 mM sodium orthovanadate, 10 mM okadaic acid, and 20 mM of protease inhibitor. Whole-cell lysates were then syringed 5 times with a 27.5-gauge syringe. Lysates were then heated at 65 °C for 15 min under reducing conditions (supplementation of lysis buffer with 10% beta-mercaptoethanol and 5% bromophenol blue), resolved by SDS-PAGE, and transferred to 0.2 m pore PVDF membrane (PALL Life Science). The membrane was blocked with 3% bovine serum albumin (BSA) and then incubated with indicated antibodies in 1% BSA at 1:1000 dilution at 4 °C overnight. The membrane was then subjected to a secondary horseradish peroxidase–conjugated antibody (with 1% BSA) and left to shake for 1 h at RT before imaging. Bands were visualized with Luminata ECL chemiluminescence substrate (Milipore Sigma).
Full text: Click here
Publication 2023
2-Mercaptoethanol Antibodies Bromphenol Blue Buffers Cells Chemiluminescence Common Cold Glycerin Horseradish Peroxidase Immunoglobulins Okadaic Acid Orthovanadate Pharmacotherapy polyvinylidene fluoride Protease Inhibitors SDS-PAGE Serum Albumin, Bovine Sodium Syringes Technique, Dilution Tissue, Membrane Tremor Tromethamine
Cells were lysed in Radioimmunoprecipitation assay (RIPA) buffer (1% IGEPAL CA-630, 150 mM NaCl, 0.1% sodium dodecyl sulfate [SDS], 50 mM Tris pH 8.0, 1 mM Ethylenediaminetetraacetic acid (EDTA), 0.5% sodium deoxycholate) and protease inhibitor cocktail supplement (Roche, 11836170001). Protein concentration was determined by bicinchoninic acid assay (Pierce, 23227). 5× SDS loading buffer (235 mM SDS, 10% β-mercaptoethanol, 0.005% bromophenol blue, 210 mM Tris–HCl pH 6.8, 50% glycerol) was added to lysates to a final 1× concentration and incubated for 10 min at 90°C. Proteins were then resolved by SDS–polyacrylamide gel electrophoresis and transferred onto a nitrocellulose membrane. Membranes were blocked using Odyssey Blocking Buffer (LI-COR Biosciences, P/N 927-40000). Antibodies used: anti-Cas9 (Diagenode, C15200229, 1:10,000) and anti-ERK (Cell Signaling Technologies, 4695S, 1:1000). Secondary antibodies used: anti-rabbit (LI-COR Biosciences, 926-32213, 1:10,000) and anti-mouse (LI-COR Biosciences, 926-32210, 1:10,000). Membranes were visualised using a LI-COR Odyssey CLx Infrared Imager.
Full text: Click here
Publication 2023
2-Mercaptoethanol Antibodies bicinchoninic acid Biological Assay Bromphenol Blue Buffers Cardiac Arrest Cells Deoxycholic Acid, Monosodium Salt Dietary Supplements Edetic Acid Glycerin Igepal CA-630 Mus Nitrocellulose Protease Inhibitors Proteins Rabbits Radioimmunoprecipitation Assay SDS-PAGE Sodium Chloride Sulfate, Sodium Dodecyl Tissue, Membrane Tromethamine
MRC-5 cells were cultured in SILAC DMEM (PAA) containing 10% dialyzed Fetal Bovine Serum (FBS) (Gibco), 0.280 mM arginine, 0.384 mM lysine, 0.5 mM proline, 10 mM HEPES, 2 mM L-Glutamine and 1% NEAA for >5 cell doublings to ensure complete incorporation of labeled amino acids. Arginine to proline conversion was not observed under these conditions. The ‘light SILAC labeling’ was performed using Arg 12C614N4 and Lys 12C614N2, whereas the ‘heavy SILAC sample’ was labeled with Arg 13C615N4 and Lys 13C615N2 (Cambridge Isotope Laboratories).
SILAC-labeled MRC-5 cells were seeded in 75-cm2 flasks 1 day before infection with CHIKV-LS3 [21 (link)] at MOI 5. One hour post infection (h p.i.), the inoculum was removed and replaced with SILAC DMEM containing 2% dialyzed FBS, 0.280 mM arginine, 0.384 mM lysine, 0.5 mM proline, 25 mM HEPES, 2 mM L-Glutamine and 1% NEAA. At 2, 8, and 12 h p.i., infected and mock-infected cells were harvested for phosphoproteomics analysis by lysis in 4% SDS, 0.1M Tris pH 7.6, followed by heating to 96°C for 10 min. At 12 h p.i,. protein lysates for western blot (WB) analysis were harvested in 4× Laemmli sample buffer (LSB) (100 mM Tris-HCl, pH 6.8, 40% glycerol, 8% SDS, 40 mM DTT, 0.04 mg/ml bromophenol blue) and cells grown on coverslips were fixed in 3% PFA in PBS. The experiment was performed in duplicate with a label swap (Fig 1A).
Full text: Click here
Publication 2023
Amino Acids Arginine Bromphenol Blue Cells Fetal Bovine Serum Glutamine Glycerin HEPES Infection Isotopes Laemmli buffer Light Lysine Proline Proteins Tromethamine Western Blot
Proteins for SDS-PAGE were denatured by heating to 95°C for 5 min in sample buffer (1% SDS, 5–15 mM DTT, bromphenol blue) and separated using the glycine/2-amino-2-methyl-1,3-propanediol/HCl (ammediol) system in 5–15 or 10–15% acrylamide gradient gels (Bury, 1981 (link)) casted in-house (10 × 10 × 0.15 cm). The gels were stained with Coomassie Brilliant Blue.
Full text: Click here
Publication 2023
1,3-propanediol 2-amino-2-methyl-1,3-propandiol Acrylamide brilliant blue G Bromphenol Blue Buffers Gels Glycine Proteins SDS-PAGE

Top products related to «Bromphenol Blue»

Sourced in United States, Germany, China, United Kingdom, Morocco, Ireland, France, Italy, Japan, Canada, Spain, Switzerland, New Zealand, India, Hong Kong, Sao Tome and Principe, Sweden, Netherlands, Australia, Belgium, Austria
PVDF membranes are a type of laboratory equipment used for a variety of applications. They are made from polyvinylidene fluoride (PVDF), a durable and chemically resistant material. PVDF membranes are known for their high mechanical strength, thermal stability, and resistance to a wide range of chemicals. They are commonly used in various filtration, separation, and analysis processes in scientific and research settings.
Sourced in United States, Germany, United Kingdom, India, Italy, Canada, Australia, France
Bromophenol blue is a pH indicator dye commonly used in biochemistry and molecular biology applications. It is a chemical compound with the formula C₁₉H₁₀Br₄O₅S. Bromophenol blue exhibits a range of color changes across different pH levels, making it useful for monitoring the pH of solutions during various experiments and procedures.
Sourced in United States, Switzerland, Germany, China, United Kingdom, France, Canada, Japan, Italy, Australia, Austria, Sweden, Spain, Cameroon, India, Macao, Belgium, Israel
Protease inhibitor cocktail is a laboratory reagent used to inhibit the activity of proteases, which are enzymes that break down proteins. It is commonly used in protein extraction and purification procedures to prevent protein degradation.
Sourced in United States, Germany, China, United Kingdom, Italy, Japan, Sao Tome and Principe, France, Canada, Macao, Switzerland, Spain, Australia, Israel, Hungary, Ireland, Denmark, Brazil, Poland, India, Mexico, Senegal, Netherlands, Singapore
The Protease Inhibitor Cocktail is a laboratory product designed to inhibit the activity of proteases, which are enzymes that can degrade proteins. It is a combination of various chemical compounds that work to prevent the breakdown of proteins in biological samples, allowing for more accurate analysis and preservation of protein integrity.
Sourced in United States, Germany, Italy, United Kingdom, Canada, France, China, Switzerland, Japan, Spain, Australia, Sweden, Portugal, Israel, Netherlands, Belgium
Nitrocellulose membranes are a type of laboratory equipment designed for use in protein detection and analysis techniques. These membranes serve as a support matrix for the immobilization of proteins, enabling various downstream applications such as Western blotting, dot blotting, and immunodetection.
Sourced in United States, China, Germany, United Kingdom, Italy, France, Canada, Australia, Belgium, Japan, Portugal, Sweden, Czechia, Switzerland, Spain
Image Lab software is a data analysis tool designed for use with Bio-Rad's gel and blot imaging systems. The software provides a user-friendly interface for capturing, analyzing, and processing images of gels, blots, and other samples.
Sourced in United States, Germany, United Kingdom, China, Italy, Niger, France, Netherlands, Austria, Australia, Liechtenstein
The Odyssey Infrared Imaging System is a versatile laboratory equipment designed for high-sensitivity detection and quantification of fluorescent and luminescent signals. The system utilizes infrared technology to capture and analyze various molecular targets, such as proteins, nucleic acids, and small molecules, in a range of sample types.
Sourced in United States, United Kingdom, China, Germany, Canada, France, Australia, Italy, Spain, Japan, Denmark, Austria, Israel, Sweden, Portugal, Belgium, Singapore, United Arab Emirates
The ChemiDoc MP Imaging System is a versatile laboratory instrument designed for the detection and analysis of various biomolecules, including proteins, nucleic acids, and chemiluminescent samples. It utilizes advanced imaging technology to capture high-quality images and data for applications such as Western blotting, gel documentation, and DNA/RNA visualization.
Sourced in United States, Germany, China, United Kingdom, Japan, France, Canada, Spain, Italy, Australia, Switzerland, Austria, Belgium
PVDF membranes are a type of laboratory equipment used for protein transfer and detection in Western blot analysis. They provide a stable and durable surface for the immobilization of proteins, enabling effective identification and quantification of target proteins in complex biological samples.
Sourced in United States, United Kingdom, Germany, Italy, Sweden, Switzerland, Australia, France, China, Canada, Japan, India
Nitrocellulose membranes are a type of laboratory equipment used for the transfer and immobilization of proteins and nucleic acids. They are commonly utilized in various analytical techniques, such as Western blotting and dot blotting, to facilitate the detection and identification of specific biomolecules.

More about "Bromphenol Blue"

Bromphenol blue, also known as bromophenol blue (BPB), is a synthetic organic compound commonly used as a pH indicator and analytical reagent in various scientific and medical applications.
This blue-colored dye changes color based on the pH of the solution, making it useful for monitoring acidity levels and detecting pH changes in experiments.
Bromphenol blue has a wide range of applications, including its use as a stain in biochemistry, a colorimetric indicator in analytical chemistry, and a tool for visualizing protein separation in electrophoresis.
Researchers can leverage the power of AI-driven comparisons to optimize Bromphenol blue protocols, explore pre-prints, patents, and scientific literature, and find the best products and protocols to streamline their research and improve their results.
One related compound often used in research is PVDF (polyvinylidene fluoride) membranes, which are commonly used for protein transfer and detection in Western blotting.
Similarly, nitrocellulose membranes are another popular choice for protein transfer and analysis.
Protease inhibitor cocktails are also frequently used in combination with Bromphenol blue to preserve the integrity of protein samples.
Researchers can utilize specialized imaging systems, such as the Odyssey Infrared Imaging System or the ChemiDoc MP Imaging System, to visualize and analyze protein bands or bands stained with Bromphenol blue.
Additionally, software like Image Lab can be used to process and quantify the results of these experiments.
By understanding the versatility and applications of Bromphenol blue, researchers can optimize their protocols, leverage the latest technologies, and streamline their research to improve their results and advance their scientific discoveries.