The largest database of trusted experimental protocols

Falcon hts fluoroblok 24 well inserts

Manufactured by BD
Sourced in United States

The Falcon HTS FluoroBlok 24-well inserts are a laboratory equipment product designed for cell-based assays. The inserts feature a porous membrane that allows for the passage of cells and media while preventing the direct interaction between cells in different wells. This design enables the study of cell migration and invasion without the interference of direct cell-cell contact.

Automatically generated - may contain errors

7 protocols using falcon hts fluoroblok 24 well inserts

1

Quantifying Cell Migration and Invasion

Check if the same lab product or an alternative is used in the 5 most similar protocols
The migration and invasion ability of cells were determined by the Boyden chamber technique (transwell analysis). The cell migration assay was performed with Falcon HTS FluoroBlok 24-well inserts (BD Biosciences). The 24-well Collagen-Based Cell Invasion Assay (Millipore) was used in the cell invasion assay. In brief, we rehydrated each insert by adding serum-free medium, replacing it with serum-free suspension with equal amounts of cells in the upper chamber, and incubating the cells for 12 to 24 hours to allow the cells to migrate toward/invade the lower chamber containing 10% FBS. After removing the non-invading cells in the upper chamber, the cells invading through the inserts were stained with the supplied dye, dissolved in extraction buffer, and transferred to 96-well plates for colorimetric reading at 560 nm by using ELISA microplate reader (GloMax Discover, Promega) [42 (link), 43 (link)].
+ Open protocol
+ Expand
2

Cell Migration and Invasion Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell migration assay was performed using Falcon HTS FluoroBlok 24-well inserts (BD Biosciences, Franklin Lakes, NJ, USA) and the cell invasion assay was performed using the 24-well Collagen-based Cell Invasion Assay (Millipore, Beverly, MA, USA). Briefly, we added serum-free medium to rehydrate each insert, then replaced it with a serum-free suspension with equal numbers of cells in the upper chamber, followed by a 12- to 24-h incubation period to allow cells to migrate toward (i.e., invade) the lower chamber, which contained medium with 10% fetal bovine serum. After removal of the noninvading cells in the upper chamber, cells that invaded through the inserts were stained, lysed in extraction buffer, and transferred to 96-well plates for colorimetric readings at 560 nm.
+ Open protocol
+ Expand
3

Boyden Chamber Cell Migration and Invasion

Check if the same lab product or an alternative is used in the 5 most similar protocols
Migration and invasion ability of cells were determined by Boyden chamber technique (transwell analysis). The cell migration assay was carried out with Falcon HTS FluoroBlok 24-well inserts (BD Biosciences). The cell invasion assay was performed using the 24-well Collagen-Based Cell Invasion Assay (Millipore). Briefly, we rehydrated each insert by adding serum-free medium, then replaced it with serum-free suspension with equal amounts of cells in the upper chamber, and incubated them for 12 to 24 hours to let cells migrate toward/invade the lower chamber containing 10% FBS. After removing the non-invading cells in the upper chamber, cells invading through the inserts were stained with provided dye, dissolved in extraction buffer, and transferred to 96-well plates for colorimetric reading at 560 nm.
+ Open protocol
+ Expand
4

Transwell Assay for Cell Migration

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell migration was assessed using Falcon HTS FluoroBlok 24-well inserts (BD Biosciences, San Jose, CA) with 8 μm pores. UC-MSCs (2×104) suspended in 200 μl DMEM (Invitrogen) with 10% FBS were seeded in the upper well of the transwell chamber, while RPMI 1640 medium, H7402-conditioned media or 5×104 H7402 cells per well suspended in 600 μl RPMI 1640 medium were added to the lower chamber of 24-well plate. After incubation at 37℃ for 12 h, the cells that had passed through UC-MSCs the transwell filter were stained with Geisma and counted in eight non-overlapping fields under a light microscope at ×200 magnification.
+ Open protocol
+ Expand
5

Cell Migration and Invasion Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
The migration assay was carried out by using the Falcon HTS FluoroBlok 24-well inserts (BD Biosciences) and the invasion assay by the 24-well Collagen-Based Cell Invasion Assay (ECM 554, Millipore). These tests were performed according to the manufacturer's instructions. In brief, an equal amount of cells were suspended in serum-free medium and were added to the upper chambers. The plates were then incubated at 37°C and 5% CO2 for six h to allow migration or invasion of the cells through the membrane into the lower chamber. After the non-invading cells in the upper chamber were removed, the migrated or invaded cells were stained, dissolved in buffer, and transferred to 96-well plates for colorimetric reading.
+ Open protocol
+ Expand
6

Boyden Chamber Cell Migration and Invasion

Check if the same lab product or an alternative is used in the 5 most similar protocols
Migration and invasion were studied via Boyden chamber technique (transwell analysis). The cell migration assay was performed using Falcon HTS FluoroBlok 24-well inserts (BD Biosciences). The cell invasion assay was done using the 24-well Collagen-Based Cell Invasion Assay (Millipore) [15 (link)].
+ Open protocol
+ Expand
7

Collagen-based Cell Invasion Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
The experimental protocol for cell migration and invasion was carried out in accordance with a previously documented procedure [22] . For the cell invasion experiment, the 24-well Collagen-based Cell Invasion Assay from Millipore, Beverly, MA, USA, and Falcon HTS FluoroBlok 24-well inserts from BD Biosciences, Franklin Lakes, NJ, USA, were used. The inserts were rehydrated using serumfree medium and then placed in the upper chamber, which contained a serum-free suspension with an equal number of cells. Over a 12-to 24-hour incubation period, the cells were allowed to migrate towards the lower chamber, which contained a medium with 10% fetal bovine serum. Following removal of the non-invading cells from the upper chamber, the invading cells were stained, lysed in extraction buffer, and then transferred to 96-well plates for 560 nm colorimetric readings.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!