Multiwall carbon nanotubes (MWCNT, Baytubes® C150P; amorphous carbon content 0%) with an average outside diameter of 13 nm, inside diameter of 4 nm, and length over 1 μm were obtained from Bayer Material Science (Leverkusen, Germany) and used as supplied. 1-Ethyl-3-methylimidazolium chloride (EMIMCl, >97%), bis(trifluoromethane)sulfonimide lithium salt (LiTFSI, 99.9%), ethanol (technical), and propylene carbonate (PC, >99%) were purchased from Sigma-Aldrich (Taufkirchen, Germany). Deionized water Milli-Q+ (Tallinn, Estonia) was used as supplied.
1 ethyl 3 methylimidazolium chloride emimcl
Manufactured by Merck Group
Sourced in Germany, United States
1-Ethyl-3-methylimidazolium chloride (EMIMCl) is a type of ionic liquid. It is a colorless, viscous liquid composed of organic cations and inorganic or organic anions. EMIMCl has a melting point below 100°C.
Automatically generated - may contain errors
Lab products found in correlation
Propylene carbonate, by Merck Group (2 mentions)
Bis trifluoromethane sulfonimide lithium salt litfsi, by Merck Group (1 mentions)
Ethanol, by Merck Group (1 mentions)
Baytubes c 150 p, by Bayer (1 mentions)
Acetone, by Thermo Fisher Scientific (1 mentions)
Acetonitrile, by Thermo Fisher Scientific (1 mentions)
Litfsi, by Merck Group (1 mentions)
Pvdf hfp pellets, by Merck Group (1 mentions)
Emim tfsi, by Merck Group (1 mentions)
Zncl2, by Merck Group (1 mentions)
α cellulose, by Merck Group (1 mentions)
Nitric acid hno3, by Merck Group (1 mentions)
Lactic acid, by Merck Group (1 mentions)
Choline chloride, by Merck Group (1 mentions)
Sulfuric acid h2so4, by Merck Group (1 mentions)
Vinyl pivalate, by Tokyo Chemical Industry (1 mentions)
Vinyl propionate, by Tokyo Chemical Industry (1 mentions)
Vinyl laurate, by Tokyo Chemical Industry (1 mentions)
Glucose assay kit, by Merck Group (1 mentions)
Bovine serum albumin (bsa), by Merck Group (1 mentions)
5 protocols using 1 ethyl 3 methylimidazolium chloride emimcl
1
Multiwall Carbon Nanotubes for Electrochemical Devices
2
Electrochemical Device Fabrication
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) pellets (Mw: 400,000, Sigma-Aldrich), poly(methacrylic acid methyl ester) (PMMA) powder (Mw: 996,000, Sigma-Aldrich), Zn(CF3O3S)2 powder (98.0%, Sigma-Aldrich), 1-Ethyl-3-methylimidazolium chloride ([EMIM]Cl) (98.0%, Sigma-Aldrich), ZnCl2 (≥98%, Sigma), [EMIM]CF3O3S ( ≥ 98%, Sigma-Aldrich), [EMIM][TFSI] (≥98%, Sigma-Aldrich), Li[TFSI] (99.95%, Sigma-Aldrich), acetone (≥99.8%, Fisher Chemical), acetonitrile (≥99.9%, Fisher Chemical), propylene carbonate (PC) (99.7%, Sigma-Aldrich), fluorine-doped tin oxide (FTO) glass, and polytetrafluoroethylene (PTFE) spacers were purchased and directly used without further treatments.
3
Cellulose-Based Feedstock Utilization
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
α-Cellulose as a feedstock was purchased from Sigma-Aldrich (KOREA). The activated carbon, nitric acid (HNO3, 70%) and sulfuric acid (H2SO4, 95–98%) were purchased from Sigma-Aldrich. 1-Ethyl-3-methylimidazolium chloride ([EMIM]Cl, 98%) and 1,3-dimethylimidazolium dimethyl phosphate ([DMIM]DMP, 98%) were purchased from Sigma-Aldrich. Lactic acid and choline chloride were also provided by Sigma-Aldrich.
4
Cellulose Modification with Imidazolium Ionic Liquids
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
1-Ethyl-3-methylimidazolium acetate (EmimOAc) was obtained from Kanto Chemical Co., Inc. (Tokyo, Japan) and was used without further purification. 1-Ethyl-3-methylimidazolium chloride (EmimCl) was purchased from Sigma-Aldrich Co. LLC. (St. Louis, MO, USA) and was used after recrystallization twice from acetonitrile. Cellulose (Avicel® PH-101, particle size < 50 μm) was obtained from Sigma-Aldrich Co. LLC. (St. Louis, MO, USA). The number-average degree of polymerization of Avicel was calculated to be 105.14 (link) All the ILs, except EmimOAc, were synthesized according to conventional protocols. Tetrabutylammonium hydroxide (TBAOH) methanol solution, vinyl propionate, vinyl laurate, vinyl pivalate and vinyl 4-tert-butylbenzoate were purchased from Tokyo Chemical Industry (TCI, Tokyo, Japan). Other chemicals were obtained from commercial sources and were used as-received unless otherwise stated.
5
Cellulose Biomass Pretreatment and Characterization
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Carboxymethyl cellulose (CMC) (400–800 cps), cellulose powder (Type 20), α-cellulose, Avicel PH101, cellobiose, glucose, glucose assay kit, and ionic liquids such as 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4), 1-butyl-3-methylimidazolium acetate (BMIM-Ac), and 1-ethyl-3-methylimidazolium chloride (EMIM-Cl) were purchased from Sigma-Aldrich (St. Louis, MO, USA). Phosphoric acid-swollen cellulose (PASC) was prepared from Avicel PH101, as previously described by Zhang et al. (2006 (link)). All cello-oligosaccharide stocks (G2–G6) were purchased from Megazyme (Wicklow, Ireland). Bovine serum albumin (BSA) was purchased from Merck (Darmstadt, Germany). All other reagents were of analytical grade purity and obtained from similar commercial sources.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!