The largest database of trusted experimental protocols

Agilent 500

Manufactured by Agilent Technologies
Sourced in United States

The Agilent 500 is a high-performance laboratory instrument designed for analytical applications. It features advanced technology to provide reliable and precise data. The core function of the Agilent 500 is to perform analytical measurements and testing as required by the user's specific needs.

Automatically generated - may contain errors

8 protocols using agilent 500

1

Comprehensive Analytical Techniques for Natural Product Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
Optical rotations were measured on a Jasco P-2000 polarimeter (Jasco, Easton, MD, USA). IR spectra were recorded on a Perkin–Elmer FT-IR Spectrum Two spectrometer (Perkin Elmer, Boston, MA, USA). 1H and 13C NMR spectra were recorded on an Agilent 500 (Agilent Technologies, Santa Clara, CA, USA) or on a Bruker 500 spectrometer (Bruker, Billerica, MA, USA), using CD3OD as solvent. Chemical shifts were referenced using the solvent signals at δH 3.30 and δC 49.0. COSY, HSQC, HMBC, and NOESY experiments were performed using standard Agilent or Bruker pulse sequences. High-resolution mass spectra (HRESIMS) were obtained on a Waters XEVO G2-S Mass spectrometer (Waters, Milford, MA, USA). Column chromatography was carried out on Merck Silica gel 60 (70–230 mesh) (Merck, Darmstadt, Germany). SPE separations were performed on Supelco DSC18 cartridges (Supelco, Bellefonte, PA, USA). HPLC separations were performed on a LaChrom-Hitachi apparatus (Merck, Darmstadt, Germany) using a differential refractometer RI-71. Luna Si (2) (250 × 4.6 mm, 5 μm) (Phenomenex, Torrance, CA, USA) and Luna Si (2) (250 × 10 mm, 5 μm) (Phenomenex, Torrance, CA, USA) columns were used for separations in normal phase. All solvents were of HPLC grade.
+ Open protocol
+ Expand
2

Characterization of Chemical Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
All the reagents and solvents were purchased
from Sigma-Aldrich, Fluorochem, and Acros and used without further
purification. Thin-layer chromatography was performed on Millipore
precoated silica gel plates (0.20 mm thick, particle size 25 μm).
Nuclear magnetic resonance spectra were recorded on an Agilent 500
{1H NMR (500 MHz), 13C NMR (126 MHz)}. Chemical
shifts for 1H NMR were reported as δ values and coupling
constants were measured in hertz (Hz). The following abbreviations
were used for spin multiplicity: s = singlet, br s = broad singlet,
d = doublet, t = triplet, q = quartet, quin = quintet, dd = double
of doublets, ddd = double doublet of doublets, and m = multiplet.
Mass spectra (HRMS) were determined on an electrospray ionization
mass spectrometry (ESI-MS) by using a ThermoFisher Scientific (Bremen,
Germany) model LTQ Orbitrap Discovery MS at a flow rate of 10 μL/min
using a syringe pump. The infusion experiments were run using a standard
ESI source operating in a positive ionization mode. Source operating
conditions were a 3.7 kV spray voltage and a 300 °C heated capillary
temperature.
+ Open protocol
+ Expand
3

Synthesis and Kinetic Analysis of Hercynine

Check if the same lab product or an alternative is used in the 5 most similar protocols
Reagents were purchased from Sigma-Aldrich and Fisher Scientific unless otherwise specified. Hercynine was synthesized following reported procedure.29 (link) NMR spectra were recorded using Agilent 500 (500 MHz VNMRS). The kinetic parameter was determined using Cary Bio-100 spectrophotometer (Agilent).
+ Open protocol
+ Expand
4

NMR Characterization of CS-SDAEM Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectra of pure CS and its CS-SDAEM derivatives were recorded on an Agilent 500 spectrometer (Agilent, Santa Clara, CA, USA), at a frequency of 500 MHz. The polymer was dissolved in deuterated acetic acid solution (CD3COOD 2% v/v). The measurement was conducted at room temperature, relaxation delay was 1 s and the number of scans was 16. Spectra were internally referenced with tetramethylsilane (TMS) and calibrated using the residual solvent peaks.
+ Open protocol
+ Expand
5

Spectroscopic Characterization of Chemical Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
All the solvents and reagents were purchased
from Sigma-Aldrich, Fluorochem, Acros and were used without further
purification. Thin layer chromatography was performed on silica gel
plates (0.20 mm thick, particle size 25 μm). Nuclear magnetic
resonance spectra were recorded on Agilent 500 {1H NMR
(500 MHz), 13C NMR (126 MHz)}. Chemical shifts for 1H NMR were reported as δ values and coupling constants
were in hertz (Hz). The following abbreviations were used for spin
multiplicity: s = singlet, br s = broad singlet, d = doublet, t =
triplet, q = quartet, quin = quintet, dd = double of doublets, ddd
= double doublet of doublets, m = multiplet. Mass spectra (HRMS) were
determined on an electrospray ionization mass spectrometry (ESI-MS),
by using a Thermo Fisher Scientific (Bremen, Germany) model LTQ Orbitrap
Discovery MS, at a flow rate of 10 μL/min using a syringe pump.
The infusion experiments were run using a standard ESI source operating
in a positive ionization mode. Source operating conditions were a
3.7 kV spray voltage and a 300 °C heated capillary temperature.
+ Open protocol
+ Expand
6

NMR Spectroscopy of Organic Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
NMR spectra were recorded in deuterated chloroform (CDCl3), on an Agilent 500 spectrometer (Agilent Technologies, Santa Clara, CA, USA), at room temperature. Spectra were internally referenced with tetramethylsilane (TMS) and calibrated using the residual solvent peak.
+ Open protocol
+ Expand
7

Spectroscopic Analysis of Organic Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
Optical rotations were measured on a Jasco P-2000 polarimeter (Jasco, Easton, MD, USA). IR spectra were recorded on a Perkin-Elmer FT-IR Spectrum Two spectrometer (Perkin Elmer, Boston, MA, USA). 1H and 13C NMR spectra were recorded on an Agilent 500 (Agilent Technologies, Santa Clara, CA, USA) or on a Bruker 500 spectrometer (Bruker, Billerica, MA, USA) using CD3OD as solvent. Chemical shifts were referenced using the solvent signals at δH 3.30 and δC 49.0. COSY, HSQC, HMBC, and NOESY experiments were performed using standard Agilent or Bruker pulse sequences. High resolution mass spectra (HRESIMS) were obtained on a Waters XEVO G2-S Mass spectrometer (Waters, Milford, MA, USA). Column chromatography was carried out on Merck Silica gel 60 (70–230 mesh) (Merck, Darmstadt, Germany). SPE separations were performed on Supelco DSC18 cartridges (500 mg/3 mL or 1 g/6 mL) (Supelco, Bellefonte, PA, USA). HPLC separations were performed on a LaChrom-Hitachi apparatus (Merck, Darmstadt, Germany) using a differential refractometer RI-71. Luna Si (2) (250 × 4.6 mm, 5 μm) (Phenomenex, Torrance, CA, USA) and Luna Si (2) (250 × 10 mm, 5 μm) (Phenomenex, Torrance, CA, USA) columns were used for separations in normal phase. All solvents were of HPLC grade.
+ Open protocol
+ Expand
8

Hercynine Synthesis and Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
Reagents were purchased from Sigma-Aldrich and Fisher Scientific unless otherwise specified. Hercynine was synthesized following reported procedure.57 (link) Proton and carbon nuclear magnetic resonance spectra were recorded using Agilent 500 (500 MHz VNMRS). The kinetic parameter was determined using Cary Bio-100 spectrophotometer (Agilent).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!