The largest database of trusted experimental protocols

Dopamine hydrochloride

Manufactured by Thermo Fisher Scientific
Sourced in United States, Germany, Poland, China, United Kingdom

Dopamine hydrochloride is a chemical compound used in laboratory settings. It is a crystalline solid that is soluble in water. Dopamine hydrochloride is commonly used as a reference standard or analytical reagent in various scientific applications.

Automatically generated - may contain errors

57 protocols using dopamine hydrochloride

1

Dendrimers for Doxorubicin Delivery

Check if the same lab product or an alternative is used in the 5 most similar protocols
Dopamine hydrochloride was purchased from Alfa Aesar (Gdansk, Poland). Doxorubicin hydrochloride (DOX·HCl) was purchased from LC Laboratories (Boston, MA, USA). PAMAM dendrimers G 3.0, phosphate buffer saline (PBS), Menadione, sodium tetraphenylborate, tris (hydroxymethyl) aminomethane, O-[N-(3-Maleimidopropionyl)aminoethyl]-O′-[3-(N-succinimidyloxy)-3-oxopropyl]heptacosaethylene glycol (molecular weight of 1570.76 g/mol), fetal bovine serum (FBS), penicillin, streptomycin, fibronectin, bovine collagen type I, bovine serum albumin, 0.1% poly-l-lysine, Muse® Oxidative Stress Assay and MUSE® Annexin V and Dead Cell assay were purchased from (Merck Darmstadt, Germany). Bronchial Epithelial Basal Medium (BEBM) and BEGM Bullet Kit were purchased from Lonza (Basel, Switzerland). WST-1 Cell Proliferation Reagent was purchased from Takara Bio (Shiga, Japan). Calcein AM, ethidium homodimer-1, Hoechst 33342, Minimum Essential Medium Eagle (MEM), dulbecco’s phosphate buffered saline (DPBS), 4% formaldehyde solution, sodium pyruvate, sodium pyruvate were purchased from Thermo Fisher Scientific (Waltham, MA, USA).
+ Open protocol
+ Expand
2

Synthesis of Electrochemical Catalysts

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cobalt (II) nitrate hexahydrate (98%), iron (II) sulfate heptahydrate (98%), zinc nitrate hexahydrate (99%), 2-methylimidazole (99%) zinc acetate dihydrate (98%), Pt/C (20%), dopamine hydrochloride (99%), 3-tris (hydorxymethyl) aminomethane (99.8%-100.1%), sodium thiocyanate (98%), potassium hydroxide (99.98%), sodium acetate trihydrate (99%), glacial acetic acid (99.9985%), and zinc foil (99.994%) were purchased from Alfa Aesar. Methanol and ethanol were received from Beijing Chemical Work Co. in analytic grade (AR). All chemicals were used as received without further purification. Nafion® solution (5 wt%, DuPont) was obtained from commercial suppliers. Milli-Q ultrapure water (resistance of 18.2 MΩ·cm at 25 °C) was used for all experiments.
+ Open protocol
+ Expand
3

Synthesizing Dopamine-Functionalized PAN Membranes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polyacrylonitrile (PAN, Mw = 150,000), dimethylformamide (DMF), and tris (hydroxymethyl) aminomethane (>99%) were purchased from Sigma-Aldrich. Dopamine hydrochloride (99%) and silver nitrate (AgNO3, 99%) were purchased from Alfa Aesar. Silica nanoparticles used for membrane rejection tests were obtained from XFNano (China). The manufacturer reports a mean particle diameter of 500 nm.
+ Open protocol
+ Expand
4

Destabilized ATP Aptamer Purification

Check if the same lab product or an alternative is used in the 5 most similar protocols
The “destabilized” ATP aptamer (5′- CTGGGGGAGTATTGCGGAGGAAA-3′) oligonucleotide sequence24 (link) was purified using dual HPLC (Biosearch Technologies, CA) and used as received. Tris-2-carboxyethyl-phosphine (TCEP), ferrocenemethanol (FcMeOH), 6-mercapto-1-hexanol (99%), Trizma (tris) base (2-amino- 2-(hydroxymethyl)-1,3-propanediol, magnesium chloride (MgCl2), sulfuric acid (H2SO4), potassium chloride (KCl), hydrogen peroxide (H2O2), hydrochloric acid (HCl) sodium chloride (NaCl), adenosine triphosphate (ATP), dopamine hydrochloride (99%) (Alfa Aesar), dimethyl sulfoxide (DMSO), and 10× Tris-EDTA were used as received from Sigma- Aldrich. All solutions were prepared using autoclaved, ultrapure water (18.0 MΩ cm at 25°C) using a Biopak Polisher Millipore ultra purification system (Millipore, Billerica, MA).
+ Open protocol
+ Expand
5

Chemical Reagents and Solvents Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
All of the chemical reagents were purchased from Sigma-Aldrich (Poznan, Poland), except for the dopamine hydrochloride (Alfa Aesar, Gdansk, Poland) and doxorubicin hydrochloride (LC Laboratories, Boston, MA, USA). All reagents and solvents were of reagent-grade quality. For all experiments, Milli-Q deionized water (resistivity 18 MΩ·cm−1) was used. 6-thio-β-cyclodextrin (SH-βCD) was kindly donated by CycloLab, (Budapest, Hungary).
+ Open protocol
+ Expand
6

Fabrication of Polarized BaTiO3/P(VDF-TrFE) Nanocomposite Membranes

Check if the same lab product or an alternative is used in the 5 most similar protocols
The BaTiO3/P(VDF-TrFE) nanocomposite membranes were fabricated based on our previously reported protocol [16 (link)]. Briefly, BTO NPs (99.9%, average particle size of 100 nm, Alfa Aesar) were dispersed ultrasonically in 0.01 mol/L of dopamine hydrochloride (99%, Alfa Aesar) aqueous solution, followed by stirring for more than 12 h at 60 °C to modify the nanoparticles. Subsequently, the modified BTO NPs together with the P(VDF-TrFE) co-polymer powders (70/30 mol% VDF/TrFE, Arkema) were both dissolved in N, N-dimethylformamide (DMF). After at least 3 rounds of repeated stirring and ultrasonication, the stable suspension was then cast into membranes of approximately 30 μm thickness and then dried at 55 °C for 10 h for solvent volatilization. For surface charge polarization, the membranes were annealed at 90 °C and 120 °C respectively for 30 min and were then treated by corona poling at room temperature for 30 min. Therefore, the membranes were differentially polarized with varying surface charges, with non-charged (NC, 55 °C, no poling), low-charged (LC, 55 °C, poling), mid-charged (MC, 90 °C annealing, poling) and high-charged (HC, 120 °C annealing, poling) nanocomposite membranes being obtained.
+ Open protocol
+ Expand
7

HPLC Analysis of Amino Acids and Amines

Check if the same lab product or an alternative is used in the 5 most similar protocols
HPLC-grade acetonitrile and methanol were from Merck. Hydrochloric acid (HCl), glycine and hydroxylamine (>97.5%) were purchased from Reakhim. DEEMM and L-ornithine monohydrochloride (≥99%) was obtained from Fluka. Boric acid (≥99%) was purchased from Hopkin & Williams. Amino acid commercial standards (L-alanine, L-arginine hydrochloride, L-asparagine, L-aspartic acid, L-glutamine, L-glutamic acid, L-glycine, L-histidine, L-isoleucine, L-leucine, L-lysine, L-methionine, L-phenylalanine, L-proline, L-serine, L-threonine, L-tryptophan, L-tyrosine and L-valine, ≥99.5%), γ-aminobutyric acid (≥99%), formic acid (≥95%), putrescine (≥99.5%), phenyethylamine (≥99.5%), tyramine hydrochloride (≥98%), ethylamine hydrochloride (98%), methylamine solution (40%), pyrrolidine (99%), ethanolamine (≥98%) and taurine (≥99%) were purchased from Sigma; dopamine hydrochloride (99%), histamine dihydrochloride (≥98%) were purchased from Alfa Aesar; L(+)-α-aminobutyric acid (98%) were purchased from Acros Organics; β-aminobutyric acid (98%) were purchased from BLD Pharmatec. Ultrapure water was supplied by a Millipore Milli-Q Advantage A10 (Millipore) and 0.75 M borate buffer at pH = 9 was prepared in deionized water.
+ Open protocol
+ Expand
8

Electrochemical Detection of Biomolecules

Check if the same lab product or an alternative is used in the 5 most similar protocols
All aqueous solutions were prepared using 18 MΩ·cm water
(NANOpure Diamond, Barnstead; Dubuque, IA, USA) and analytical grade reagents.
Copper (II) sulfate was purchased from Fisher Scientific (Fair Lawn, NJ, USA).
D-glucose was acquired from Aldrich Chemical Company, Inc. (Milwaukee, WI, USA).
Uric acid and dopamine hydrochloride were obtained from Alfa Aesar (Ward Hill,
MA, USA). Acetylsalicylic acid, diclofenac sodium salt, and L-ascorbic acid were
purchased from Sigma Aldrich (St. Louis, MO, USA). D-fructose was acquired from
Lancaster Synthesis, Inc. (Pelham, NH, USA). All reagents were used without
further treatment. Unless specifically stated, the electrochemical measurements
were performed in 100 mM NaOH solution (pH = 13.0). The D-glucose stock
solutions were prepared dissolving the corresponding amount of solid in 100 mM
NaOH solution and stored in the fridge after use. Standard solutions of
L-ascorbic acid (AA), Uric acid (UA), dopamine hydrochloride (DA), D-fructose,
and diclofenac sodium salt were freshly prepared also in 100 mM NaOH solution
before each experiment. Soft drinks used as real samples were obtained from a
local market.
+ Open protocol
+ Expand
9

Hydrogel Synthesis and Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
Acrylamide was purchased from MP Biomedicals LLC (France, purity ≥ 99%, Acrylamide acid <0.001%), lithium bromide (≥99%), sodium bromide (≥99%), sodium bicarbonate (≥99.5%), methacrylate anhydride (99%), N,N′-MethylenebisAcrylamide (MBAA, purity ≥ 99.5%), microcrystalline cellulose (MCC, size exclusion, ca 50 μm particle size), 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO, 98%), phenylboronate Acrylamide (PBAAm, 98%), phosphotungstic acid hydrate (PTA, ≤ 0.002% total nitrogen), 2,4,6-trimethylbenzoyl chloride (97%) were bought from Sigam-Aldrich (Germany). Dimethoxyphenylphosphine (97%), dopamine hydrochloride (99%) and 2-butanone (99%) were received from Alfa Aesar (Germany). Sodium hydroxide (99%), borax-NaOH buffer (pH = 10.00, accuracy: ± 0.02 pH, reference temperature 20 °C) and sodium hypochlorite solution (14%, active chlorine) were purchased from TH Geyer (Germany). DI water (conductivity <1 μS/cm, room temperature) was used in all steps and all solvents were used directly from TH Geyer (Germany) without further treatment. Dopamine methylacrylate (DMA) and lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) were prepared using the reported method54 (link),55 (link).
+ Open protocol
+ Expand
10

Dopamine-Induced Cell Viability Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Dopamine hydrochloride, 99%, was purchased from Alfa Aesar. Dimethyl sulfoxide (DMSO) and 3-(4,5-dimethylthiazol-2yl)-2,5diphenyl tetrazolium bromide (MTT) were purchased from Sigma. Recombinant Mouse FGF basic and Mouse/Rat FGF basic Quantikine ELISA Kit were purchased from R&D Systems. BCA Protein Assay Kit was purchased from Abcam. All other commercially available solvents were obtained from Fisher Scientific Company.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!