The largest database of trusted experimental protocols

Unicel dxc 600 synchron

Manufactured by Beckman Coulter
Sourced in United States

The UniCel DxC 600 Synchron is a clinical chemistry analyzer designed for high-throughput laboratory testing. It is capable of performing a wide range of diagnostic tests, including those for chemistry, immunoassay, and electrolyte analysis. The instrument is equipped with advanced features to ensure accurate and efficient sample processing.

Automatically generated - may contain errors

12 protocols using unicel dxc 600 synchron

1

Liver Injury Biomarkers in Chicken

Check if the same lab product or an alternative is used in the 5 most similar protocols
To detect liver injury in chicken, the serum aspartate aminotransferase (AST), alanine aminotransferase (ALT), LDH, total protein (TP), and albumin (ALB) contents were determined by an automatic biochemical analyzer (UniCel DxC 600 Synchron, Beckman Coulter, Brea, CA). The liver tissue was evaluated by optical microscope after being stained with hematoxylin and eosin (H&E).
+ Open protocol
+ Expand
2

Cytokine Profiling in Mice

Check if the same lab product or an alternative is used in the 5 most similar protocols
Levels of cytokines in the serum of all the mice (IL-15, IL-17A,IL-22, IL-23, and CCL5) were performed using commercially available mouse ELISA kits according to the protocols supplied by the manufacturer and detected by a multimode microplate reader (Beckmancoulter UniCel DxC 600 Synchron, United States).
+ Open protocol
+ Expand
3

Antioxidant Biomarkers in SSVD Plasma

Check if the same lab product or an alternative is used in the 5 most similar protocols
Peripheral venous blood was collected from each SSVD patient between 8:00-9:00 a.m. after overnight fasting in EDTA-coated tubes. Within 30 min of collection, samples were centrifuged at 1000 g for 10 min at 4°C to obtain plasma. The plasma sample was aliquoted and stored at −80°C.
Three common antioxidant indexes were measured: the levels of superoxide dismutase (SOD), catalase (CAT), and total antioxidant capacity (T-AOC) in plasma were determined using a fully automatic biochemical analyzer (Beckman Coulter UniCel DxC 600 Synchron, United States). Human plasma samples were assayed using SOD assay kits (Lot: 20220712.40001, RGB, Beijing, China), CAT assay kits (Lot: 20221113.40051, RGB, Beijing, China), and T-AOT assay kits (Lot: 20220715.40009, RGB, Beijing, China).
+ Open protocol
+ Expand
4

Blood Sampling and Biomarker Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Venous blood samples were collected on each testing day (pre, post1, and post2; between 8 and 10 a.m., and ~2 h after the athletes took a typical breakfast) from an antecubital arm vein of the right arm using a 20-gauge disposable Safety-Multifly® needle (Sarstedt AG & Co, Nümbrecht, Germany) while the subject was in a supine position. Samples were collected into 7.5 mL serum gel tubes with clotting activator (Sarstedt AG & Co, Nümbrecht, Germany) and subsequently centrifuged at 3500 rpm for 15 min within 20 min after sampling. The resulting serum was separated from the other compounds, pipetted into micro tubes (Sarstedt AG & Co, Nümbrecht, Germany) and stored at -80°C. Later, routine techniques (UniCel® DxC 600 Synchron®, Beckmann Coulter GmbH, Krefeld, Germany) were used for analysis of the concentration of creatinkinase (CK), c-reactive protein (CRP), and urea. The diagnostic laboratory used in this study held current quality assurance certification (Referenzinstitut für Bioanalytik, Bonn, Germany).
+ Open protocol
+ Expand
5

Biochemical Markers and Antioxidant Responses in DHAV-1 Infection

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples and liver tissues were obtained from 5 ducklings in each group at 4, 8, and 54 h after injecting DHAV-1. The samples were centrifuged to collect serum after coagulation. Serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), lactate dehydrogenase (LDH), and total cholesterol (T-CHO) levels were determined using enzymatic colorimetric assay kits on an automatic biochemistry analyzer (UniCel DxC 600 Synchron, Beckman Coulter, Brea, CA). The liver tissues were dissected and homogenized in iced saline immediately. Then, the homogenates were centrifuged at 2,500 g for 10 min. The supernatants were collected and stored at −70°C for posterior hepatic SOD, CAT, glutathione peroxidase (GPX), iNOS activities, and MDA content examination.The ATP levels in liver tissues were measured by using the ATP assay kit, according to the instructions. Liver mitochondrion was isolated by using low-temperature differential centrifugation according to the kit instructions and stored at −70°C for posterior mitochondrial SOD, CAT, GPX, iNOS activities, and MDA content examination.
+ Open protocol
+ Expand
6

Serum Biomarker Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The blood was collected to prepare serum. Alanine transferase (ALT) and aspartate transferase (AST) were determined by an automatic biochemical analyzer (UniCel DxC 600 Synchron, Beckman Coulter, Brea, CA). The cytokines production of IL-6, IL-10, and TNF-α was measured by ELISA method according to the manufacturer's instructions.
+ Open protocol
+ Expand
7

High-sensitivity CRP Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood was drawn via venipuncture and high sensitivity CRP levels were measured using the SYNCHRON System(s) High Sensitivity C-Reactive Protein reagent. The system portioned out one-part sample to 26-parts reagent into a cuvette and monitored change in absorbance at 940 nanometers. This change is proportional to the concentration of CRP and is used to calculate the concentration based on a single-point adjusted, pre-determined calibration curve. There was a change in lab equipment during the 2015-2016 survey cycle from the Beckman Coulter UniCel DxC 600 Synchron chemistry analyzer to the Beckman Coulter UniCel DxC 600i Synchron chemistry analyzer. An internal comparison study was reported to indicate no statistical adjustment was required to correct for this change. Specimens were frozen at −70 °C until the day of the assay. Samples were run singly as part of a Multi-analyte Biochemistry Panel. Lower limit of detection for CRP was .08 mg/L (values lower than this were set to .08 mg/L). Participants were asked to fast the morning of the blood draw.
+ Open protocol
+ Expand
8

Comprehensive Cardiovascular Assessment Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Echocardiography was conducted using a Vivid E9 ultrasound system (GE Healthcare, Milwaukee, WI, USA). The main parameters used in the present study included FS, LVEF, LVMI, left ventricular end-diastolic diameter, interventricular septal thickness and left ventricular posterior wall thickness.
After overnight fasting, the peripheral venous blood of patients was collected using a vacutainer tube (without any anticoagulant) and an EDTA-coated tube between 8:00 am and 9:00 am. Serum samples were obtained by centrifuging the collected samples at 3500 rpm for 10 min at 4 °C, and plasma samples were obtained by centrifuging the collected samples at 2000 × g for 10 min at 4 °C. All blood samples were stored at −80 °C until further use.
HbA1c levels of whole blood samples were measured using high-performance liquid chromatography (Agilent 1200 device, Agilent Technologies, Waldbronn, Germany). Serum TC, TG, LDL-C, HDL-C, FBG, AST and ALT levels were determined using a biochemical autoanalyser (UniCel DxC 600 Synchron, Beckman Coulter, California, United States). NT-proBNP in the plasma was measured using an electrochemiluminescence immunoassay (ProBNP Elecsys®, Roche Diagnostics GmbH).
+ Open protocol
+ Expand
9

Investigating Albumin and CRP Relationship

Check if the same lab product or an alternative is used in the 5 most similar protocols
The principal variables of this study were albumin (independent variable) and CRP (dependent variable). The albumin concentration was measured using the DcX800 method which was as a bichromatic digital endpoint method. CRP was measured on the Beckman Coulter UniCel DxC 600 Synchron and the Beckman Coulter UniCel DxC 660i Synchron Access chemistry analyzers. In addition, the following covariates were included: age, alanine aminotransferase, blood urea nitrogen, creatinine, Gamma Glutamyl Transferase, body mass index, alkaline phosphatase, aspartate aminotransferase, cholesterol, creatine phosphokinase, globulin, lactate dehydrogenase, triglycerides, uric acid, total bilirubin, race/ethnicity, martial status, smoking, high blood pressure, gender. Details of albumin and CRP measurement process and other covariate acquisition process are available at www.cdc.gov/nchs/nhanes/.
+ Open protocol
+ Expand
10

High-Sensitivity CRP Measurement in Fasted Participants

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood was drawn via venipuncture and high sensitivity CRP levels were assayed using the SYNCHRON System(s) High Sensitivity C-Reactive Protein reagent. The system portioned out one-part sample to 26-parts reagent into a cuvette and monitored change in absorbance at 940 nanometers. This change is proportional to the concentration of CRP and is used to calculate the concentration based on a single-point adjusted, pre-determined calibration curve. There was a change in lab equipment during the 2015–2016 survey cycle from the Beckman Coulter UniCel DxC 600 Synchron chemistry analyzer to the Beckman Coulter UniCel DxC 600i Synchron chemistry analyzer. An internal comparison study was reported to indicate no statistical adjustment was required to correct for this change. Specimens were frozen at −70 °C until the day of the assay. Samples were estimated singly as part of a Multi-analyte Biochemistry Panel. Lower limit of detection for CRP was .08 mg/L (values lower than this were set to .08 mg/L). Participants were asked to fast the morning before the blood draw.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!