The largest database of trusted experimental protocols

Tb 651t

Manufactured by Nihon Kohden
Sourced in Japan

The TB-651T is a compact and portable blood pressure monitor designed for professional use in medical settings. It provides accurate blood pressure and pulse rate measurements through the oscillometric method. The device features a large, easy-to-read digital display and operates on AC power or battery power for increased mobility. The TB-651T is intended for clinical applications where reliable blood pressure monitoring is required.

Automatically generated - may contain errors

3 protocols using tb 651t

1

Measuring Tension in Aortic Rings

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mice were anesthetized with sodium pentobarbital (50 mg/kg, i.p.), and the abdominal arteries were isolated, gently cleaned of fat and connective tissue, and cut into rings (1 mm in length) as previously reported [7 (link),29 (link)]. Rings were suspended vertically between stainless steel hooks in organ baths (20 mL) with modified Krebs–Henseleit solution (room temperature) containing (in mM): NaCl 115, KCl 4.7, CaCl2 2.5, MgCl2 1.2, NaHCO3 25, KH2PO4 1.2, and dextrose 10 in order to record the tension. The changes in isometric tension were measured with a force–displacement transducer (TB-651T; Nihon Kohden, Tokyo, Japan) connected to a carrier amplifier (EF601G; Nihon Kohden) and recorded with a pen recorder (WT-645G; Nihon Kohden). The bathing medium was maintained at 37 °C and bubbled continuously with 95% air and 5% CO2. Arterial rings were washed and allowed to equilibrate for 30 min. To measure the tension when the aortic ring snapped, the isometric tension was gradually increased (n = 7, each group).
+ Open protocol
+ Expand
2

Isometric Tension Measurement of Aortic Rings

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mice were anesthetized with sodium pentobarbital (50 mg/kg, i.p.), and the abdominal arteries were isolated, gently cleaned of fat and connective tissue, and cut into rings (1 mm in length) as previously reported [16] (link). Rings were suspended vertically between stainless steel hooks in organ baths (20 ml) with modified Krebs–Henseleit solution (room temperature) containing (in mM): NaCl 115, KCl 4.7, CaCl2 2.5, MgCl2 1.2, NaHCO3 25, KH2PO4 1.2, and dextrose 10 in order to record the tension. The changes in isometric tension were measured with a force–displacement transducer (TB-651T; Nihon Kohden, Tokyo, Japan) connected to a carrier amplifier (EF601G; Nihon Kohden) and recorded with a pen recorder (WT-645G; Nihon Kohden). The bath medium was maintained at 37°C and bubbled continuously with 95% air and 5% CO2. Arterial rings were washed and allowed to equilibrate for 30 min. To measure the tension when the aortic ring snapped, the isometric tension was gradually increased (n = 12, each group).
+ Open protocol
+ Expand
3

Isometric Contraction and Heart Rate Measurements

Check if the same lab product or an alternative is used in the 5 most similar protocols
Isometric contraction and HR were measured as described previously [9 (link), 15 (link)]. Male Wistar rats (127–313
g; 5–9-week-old) were deeply anesthetized with urethane (1.5 g/kg, i.p.) and sacrificed.
The left and right atria were isolated for the measurement of isometric contraction and
HR, respectively. Left and right atria were placed in a 15-ml organ bath
filled with Krebs-Henseleit solution, which contained the following compositions (mM): 119
NaCl, 4.8 KCl, 1.2 KH2PO4, 1.2 MgSO4, 2.5
CaCl2, 24.9 NaHCO3, and 10 glucose. The solution was saturated
with a 95% O2–5% CO2 mixture at 37°C. Left atrium, which was
electrically stimulated via a pair of platinum electrodes (field stimulation, 1 Hz, 5
msec, and 1.5 times threshold voltage) connected to an electronic stimulator (SEN-3301;
Nihon Kohden, Tokyo, Japan), was equilibrated at least for 70 min. Right atrium, which was
not electrically stimulated, was also equilibrated at least for 70 min. The resting
tension was adjusted to 0.5 g. Isometric contraction and HR were measured and recorded
with a force-displacement transducer (TB-651T; Nihon Kohden) and PowerLab system.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!