The largest database of trusted experimental protocols

7 protocols using ferulic acid

1

Choline-based Cell Culture Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Choline hydroxide (44% mass fraction, aqueous solution), glycine (Gly, ≥99%), l-alanine (Ala, ≥99%), serine (Ser, ≥99%), isoleucine (Ile,≥ 99%), aspartic acid (Asp, ≥99%), lysine (Lys, ≥99%), carbomer 940, and triethanolamine (>99%) were purchased from Aladdin and used as received. Ferulic acid (≥99%), and puerarin (≥99%) were purchased from Macklin and used as received. DMSO (≥99.9%), penicillin–streptomycin solution (100X), and l-glutamine (≥99%) were supplied by Aladdin. RPMI 1640 cell culture medium and fetal bovine serum (FBS) were purchased from Biological Industries. Phosphate buffered saline (PBS, pH = 7.4, 0.01 M) was purchased from Biorigin. CCK-8 was from Invigentech. A polyethersulfone (PES) membrane was supplied by Sartorius Stedim Biotech GmbH (Germany).
+ Open protocol
+ Expand
2

Angelica sinensis Characterization and Compound Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
The whole plant of mature Angelica sinensis (AS) was collected from Min Country, Gansu province of China in mid-October. The stem (without leaves) and root were separated into two parts, and air-dried at 50 °C for three days. The samples were ground in a knife mill to collect the saw dust passing through a 2 × 2 mm2 sieve. The powdered samples were sealed in a plastic bag and stored at 2−5 °C for further analysis.
Cinnamic acid (99%), vanillin (99%), p-hydroxybenzoic acid (98%), protocatechuic acid (97%), ferulic acid (98%), caffeic acid (98%) and campesterol (98%) were purchased from Macklin Biochemical Co., Ltd. (Shanghai, China). Z-ligustilide (98%), Butylidenephthalide (98%), Senkyunolide I (98%), stigmasterol (98%), and β-sitosterol (98%) were purchased from Chroma Biotechnol. Co., Ltd. (Chengdu, China). Coniferyl ferulate (97%) was synthesized in a laboratory according to the literature [36 (link)], and the structure and purity were elucidated by 1H NMR (Figure S1). The HPLC-grade acetonitrile (≥99.9%) and methanol (≥99.9%) were bought from Merck KGaA (Darmstadt, Germany).
+ Open protocol
+ Expand
3

Synthesis and Characterization of Bioactive Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
GA, N-(3-bromopropyl) benzene diamine, butyric acid, protocatechuic acid, benzoic acid, caffeic acid, ferulic acid, eugenol, and gallicin were obtained from Macklin (Shanghai, China). N-Hydroxy succinimide (NHS) and 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) were purchased from Yuanye (Shanghai, China). K2CO3, ethyl acetate, dimethylformamide (DMF), bovine serum albumin (BSA), and ovalbumin (OVA) were purchased from SIGMA. Ten 8-week SPF male mice were obtained from Vital River Laboratory Animal Technology (Beijing, China), license number SCXK (Beijing): 2021-0006; SP2/0 myeloma cells were purchased from Cell Center, Institute of Basic Medical Sciences, Chinese Academy of Medical Sciences.
HPLC was performed with 1220 infinityIILC (Agilent, Santa Clara, CA, USA). High-resolution mass spectrometry (HRMS) was carried out using Q Exactive Focus (Thermo Fisher, Waltham, MA, USA). UV spectrophotometer was recorded with UV-8000S (Metash, Shanghai, China). MALDI-TOF was recorded with Bruker Autoflex III (Bruker-Spectrospin AG, Karlsruhe, Germany).
+ Open protocol
+ Expand
4

Chitosan-Based Antioxidant Biomaterial

Check if the same lab product or an alternative is used in the 5 most similar protocols
Chitosan (CS) (deacetylated degree: 90%; average molecular weight: 1.5 × 105 Da), p-coumaric acid, caffeic acid, ferulic acid, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC), N-hydroxysuccinimide (NHS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) were purchased from Macklin Biochemical Co., Ltd. (Shanghai, China). Fresh pork was purchased from a local market (Yangzhou, China).
+ Open protocol
+ Expand
5

Chitosan Functionalization with Ferulic Acid

Check if the same lab product or an alternative is used in the 5 most similar protocols
CS (deacetylated degree: 90%; average molecular weight: 1.5 × 105 Da), ferulic acid, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) and 1,1,3,3-tetramethoxypropane were purchased from Macklin Biochemical Co., Ltd. (Shanghai, China). All other reagents were of analytical grade.
+ Open protocol
+ Expand
6

Starch-based Enzymatic Modification

Check if the same lab product or an alternative is used in the 5 most similar protocols
Corn starch, α-amylase (AM, 50 U mg−1), amyloglucosidase (AMG, 100 U mL−1), were purchased from Shanghai Yuanye Biotechnology Co., Ltd (Shanghai, China). Ferulic acid (99%, HPLC grade), N,N′-carbonyldiimidazole (CDI), were purchased from Macklin Biochemical Technology Co. Ltd (Shanghai, China). All the reagents used were of analytical grade unless otherwise stated.
+ Open protocol
+ Expand
7

Standardized Phytochemical Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
RYZB was purchased from Gansu Cheezheng Tibetan Medicine Co., Ltd., China, batch no. 2004007 (date of manufacture, April 2020; date of expiration, April 2023). Agarotetrol was obtained from Chengdu Push Biotechnology Co., Ltd., China, batch no. PU0295-0025, purity 99.7%. Piperine was obtained from Dalian meilunbio® Co., Ltd., China, batch no. PU0295-0025, purity 99.0%. Isoliquiritigenin was purchased from Shanghai Macklin Biochemical Co., Ltd., China, batch no. C10987045, purity 99.2%. Ferulic acid was purchased from Shanghai Macklin Biochemical Co., Ltd., China, batch no. C11347527, purity 99.2%. Vorinostat was obtained from Shanghai Macklin Biochemical Co., Ltd., China, batch no. C11120592, purity 98.7%. Methanol (chromatographic purity) was purchased from Merck, United States, batch no. l1108107033 and formic acid amine was from Sinopharm Chemical Reagents Co., Ltd., China, batch no. 30011661.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!