The largest database of trusted experimental protocols

Jeffamine ed 2003

Manufactured by Merck Group
Sourced in United States

Jeffamine® ED-2003 is a polyetheramine product manufactured by Merck Group. It is a liquid diamine with a molecular weight of approximately 2,000 g/mol. Jeffamine® ED-2003 is designed for use in a variety of industrial and specialty applications.

Automatically generated - may contain errors

2 protocols using jeffamine ed 2003

1

Thermoresponsive Polymeric Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polymerizations were performed in a DAIHAN scientific shaking water bath. Jeffamine® ED-2003 (Mn = 1900), acryloyl chloride, acrylonitrile, and polyvinylpyrrolidone (PVP360,000) were purchased from Sigma-Aldrich (St. Louis, MI, USA), N-isopropylacrylamide (NIPAM) (99.0%) was purchased from Acros organics Co., Ltd. (St. Louis, MI, USA), and N, N’-methylenebisacrylamide (BIS) (97.0%) was purchased from Alfa Aesar Co., Ltd., Haverhill, UK. Cellulose Ester Spectra/Pore 1000 kDa cut-off molecular weight dialysis membrane was purchased from spectrum laboratories, Inc., Rancho Dominguez, CA, USA. Hydrodynamic sizes, size distributions, and zeta potential measurements were determined using a Zetasizer 3000 HSA (Malvern Instruments Ltd., Malvern, UK) operating with a 4 mW HeNe laser (632.8 nm), a detector positioned at a scattering angle of and a temperature-controlled jacket for the cuvette. The FTIR spectra were recorded on Thermo Nicolet iS10 with a smart omni transmission spectrometer. TGA was carried out using a Perkin Elmer Clarus 680/Clarus SQ 8C thermogravimetric analyzer. AFM was carried out using Bruker, AXS. XTT Assay Kit was purchased from Biological Industries, Beit Haemeq, Israel. Humidified incubator (Water-Jacketed, US Autoflow Automatic CO2 Incubator manufactured by NuAire, Inc., Plymouth, MA, USA) was used for cell culture.
+ Open protocol
+ Expand
2

Polymer Matrix-Based Electrochemical Supercapacitors

Check if the same lab product or an alternative is used in the 5 most similar protocols
Diglycidyl ether of bisphenol A (DGEBA, Mw = 184 g mol−1, Kukdo chemical, Korea), O,O′-bis (2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol (Jeffamine ED-2003, Mw = 1900 g mol−1, Jeffamine ED-900 Mw = 900 g mol−1, Sigma-Aldrich, Korea), and triethylenetetramine (TETA, Mw = 146 g mol−1, Sigma-Aldrich, Korea) are used for the polymer matrix. 1-Ethyl-3-methylimidazoliumbis (trifluoromethylsulfonyl) imide (EMImTFSI, Mw = 391 g mol−1, Sigma-Aldrich, Korea) was prepared as both ion conductor and solvent. For the EDLCs, the active material of the electrode is a mixture of 80 wt% activated carbon (AC) powder with a surface area of 2000 m2 g−1 (MTI Korea, Korea), 15 wt% conductive carbon with a surface area of 62 m2 g−1 (MTI Korea, Korea) and 5% carboxymethyl cellulose (CMC, MTI Korea, Korea) powder.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!