The largest database of trusted experimental protocols

1100 ion trap msd spectrometer

Manufactured by Agilent Technologies

The 1100 ion trap MSD spectrometer is a laboratory instrument used for the analysis and identification of chemical compounds. It utilizes an ion trap mass spectrometer to separate and detect ionized molecules based on their mass-to-charge ratio. The core function of this device is to provide high-sensitivity detection and accurate mass measurement capabilities for various analytical applications.

Automatically generated - may contain errors

4 protocols using 1100 ion trap msd spectrometer

1

Synthesis and Characterization of Diarylethene 1O

Check if the same lab product or an alternative is used in the 5 most similar protocols
All solvents used were of spectro-grade
and purified by distillation prior to use. Expect for K1+ and Hg2+ (their counter anions were chloride
ions), other metal ions were obtained by the dissolution of their
respective metal nitrates (0.1 mmol) in distilled water (10 mL). EDTA
was obtained by the dissolution of EDTA disodium salt (Na2EDTA) (1.0 mmol) in distilled water (10 mL).1H NMR and 13C NMR spectra were collected on a Bruker AV400 (400 MHz)
spectrometer with DMSO-d6 as a solvent
and tetramethylsilane (TMS) as an internal standard. UV/vis spectra
were measured on an Agilent 8453 UV/vis spectrophotometer. Fluorescence
spectra were recorded with a Hitachi F-4600 fluorescence spectrophotometer.
The fluorescence quantum yield was measured with an absolute PL quantum
yield spectrometer QY C11347-11. IR spectra were collected on a Bruker
Vertex-70 spectrometer. MS analysis was performed on an Agilent 1100
ion trap MSD spectrometer. Melting point was measured using a WRS-1B
melting point apparatus. Photoirradiation experiments were performed
using an SHG-200 UV lamp, Cx-21 ultraviolet fluorescence analysis
cabinet, and a BMH-250 visible lamp. Synthesis of diarylethene 1O is shown in Scheme 3.
+ Open protocol
+ Expand
2

Fluorescent Sensor for Metal Ion Detection

Check if the same lab product or an alternative is used in the 5 most similar protocols
4-Bromo-1,8-naphthalic, morpholine, 2-methoxyethanol, ethylenediamine, chloroacetyl chloride, trimethylamine, hydrazine monohydrate, benzotriazol-1-yloxytris(dimethylamino)phosphonium hexafluorophosphate, and anhydride were bought from Innochem (Beijing, China). The other reagents were purchased from J&K Chemicals. All reagents were analytical level and employed without further purification. Nitrate salts of metal ions (Cd2+, Ni2+, Co2+, Ba2+, Ca2+, Pb2+, Fe3+, Cu2+, Mg2+, Mn2+, Zn2+, K+, Sr2+, Cr3+, Al3+, Ag+) and the perchlorate salt of Hg2+ were used for appraising the combining capacity of ions to compounds. Deionized water was applied to the entire experiment.
1H and 13C NMR spectra were obtained on a Bruker AV400 NMR spectrometer using CD2Cl2 as the solvent and tetramethylsilane (TMS) as an internal reference. Mass spectrometry was conducted on an Agilent 1100 ion trap MSD spectrometer. HPLC spectra were taken on an Agilent 1260. An Agilent UV-8454 spectrophotometer was applied to the absorption measurements. The fluorescence spectra were collected using a Hitachi F-4500 fluorescence spectrophotometer. The melting points were determined by a WRS-1B melting point apparatus. The staining of cells was performed using an OLYMPUS FV1000 confocal laser scanning microscope. The fluorescence quantum yield value was recorded by a machine named QY C11347-11.
+ Open protocol
+ Expand
3

Comprehensive Analytical Techniques Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
NMR spectra were obtained by a Bruker AV400 (1H NMR 400 MHz, 13C NMR 100 MHz) instrument using CD2Cl2 and DMSO-d6 as solvent and tetramethylsilane (TMS) as the internal standard. Mass spectrometry analysis was performed on an Agilent 1100 ion trap MSD spectrometer. Melting points were measured with a WRS-1B melting point apparatus. Fluorescence spectra were collected with a Hitachi F-4600 fluorescence spectrophotometer. UV-vis absorption spectra were carried out using an Agilent 8453 UV/vis spectrophotometer. Infrared spectra (IR) were collected on a Bruker Vertex-70 spectrometer. Elemental analysis was determined on a PE CHN 2400 analyzer. Fluorescence imaging of cells was performed using an Olympus FV1000 confocal laser scanning microscope.
+ Open protocol
+ Expand
4

Comprehensive Characterization of Organic Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
NMR spectra were recorded on a Bruker AV400 (1H NMR 400 MHz, 13C NMR 100 MHz) instrument for sample solution in CD2Cl2 with tetramethylsilane (TMS) as an internal reference. Mass spectra were collected on an Agilent 1100 ion trap MSD spectrometer. Melting point was measured with a WRS-1B melting point apparatus. Elemental analysis was carried out with a PE CHN 2400 analyzer. UV-vis spectra were measured on an Agilent 8453 UV/vis spectrophotometer. Fluorescence spectra were recorded on a Hitachi F-4600 fluorescence spectrophotometer. Infrared spectra (IR) were collected on a Bruker Vertex-70 spectrometer. Fluorescence imaging of cells were performed with an OLYMPUS FV1000 confocal laser scanning microscope.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!