The standard Tape Peel off test was conducted by utilizing the Elcometer 99 standard ASTM tape. The tape was applied to the membrane surface and then removed. The test was repeated 10 times. The mass of the membrane before and after the Tape Peel off tests was measured by utilizing a Mettler Toledo XS105 DU balance with precision down to 0.01 mg. The percentage mass loss of Fe−TiO2 nanoparticles was calculated by comparing the membrane's mass before and after the Tape Peel off test.
Xs105 du balance
Manufactured by Mettler Toledo
Sourced in United States
The XS105 DU balance is a high-precision laboratory balance from Mettler Toledo. It features a maximum capacity of 120 grams and a readability of 0.01 milligrams. The balance is designed for accurate and reliable weighing in laboratory applications.
Automatically generated - may contain errors
Lab products found in correlation
2 protocols using xs105 du balance
1
Quantifying Nanoparticle Adhesion by Tape Peel
2
Swelling Quantification of Nanohybrid Materials
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Swelling of the nanohybrid materials was quantified at equilibrium, by weighing the dry samples, m, and after equilibration at 37ºC in two different ambients: at 97% relative humidity (RH), and immersed in water. The first swelling medium was prepared with a potassium nitrate (Scharlab) supersaturated solution in a closed moisture chamber [25] .
The samples were withdrawn from the moisture chamber after different times and immediately weighed, until no weight change was further observed; this value was taken for each nanohybrid as the equilibrium value, mw. The equilibrium water content, EWC, was calculated as: 𝐸𝐸𝐸𝐸𝐸𝐸 = 𝑚𝑚 𝑤𝑤 -𝑚𝑚 𝑚𝑚 . Three replicates per composition were measured. A Mettler-Toledo XS105DU balance (Columbus, OH, USA) was used for this purpose.
The samples were withdrawn from the moisture chamber after different times and immediately weighed, until no weight change was further observed; this value was taken for each nanohybrid as the equilibrium value, mw. The equilibrium water content, EWC, was calculated as: 𝐸𝐸𝐸𝐸𝐸𝐸 = 𝑚𝑚 𝑤𝑤 -𝑚𝑚 𝑚𝑚 . Three replicates per composition were measured. A Mettler-Toledo XS105DU balance (Columbus, OH, USA) was used for this purpose.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!