The largest database of trusted experimental protocols

Labview full development system

Manufactured by National Instruments

LabVIEW Full Development System is a graphical programming environment used for building applications that interact with real-world data or signals, in areas such as data acquisition, instrument control, and industrial automation. It provides a comprehensive set of tools for designing, testing, and deploying these applications.

Automatically generated - may contain errors

4 protocols using labview full development system

1

Whisker Movement Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Whisker movement was elicited in each subject by providing a scented stimulus (chocolate milk). The laser micrometers themselves were connected to a 32-Channel Digital I/O Module (NI 9403, National Instruments, Dallas, Tx), which received digital output from the laser micrometers. The I/O module was connected to a PC through a CompactDAQ chassis (cDAQ-9174, National Instruments, Dallas, Tx). The I/O module acquired the laser micrometer signal at a sampling rate of 1 kHz. LabVIEW (LabVIEW Full Development System, National Instruments, Dallas, Tx) software was used as the interface for data acquisition.
+ Open protocol
+ Expand
2

Whisker Movement Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Whisker movement was elicited in each subject by providing a scented stimulus (chocolate milk). The laser micrometers themselves were connected to a 32-Channel Digital I/O Module (NI 9403, National Instruments, Dallas, Tx), which received digital output from the laser micrometers. The I/O module was connected to a PC through a CompactDAQ chassis (cDAQ-9174, National Instruments, Dallas, Tx). The I/O module acquired the laser micrometer signal at a sampling rate of 1 kHz. LabVIEW (LabVIEW Full Development System, National Instruments, Dallas, Tx) software was used as the interface for data acquisition.
+ Open protocol
+ Expand
3

Whisker Movement Analysis Using Laser Micrometers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Whisker movement was elicited in each subject by providing a scented stimulus (chocolate milk). The laser micrometers themselves were connected to a 32-Channel Digital I/O Module (NI 9403, National Instruments, Dallas, Tx), which received digital output from the laser micrometers (Fig. 3). The I/O module was connected to a PC through a CompactDAQ chassis (cDAQ-9174, National Instruments, Dallas, Tx). The I/O module acquired the laser micrometer signal at a sampling rate of 1 kHz. LabVIEW (LabVIEW Full Development System, National Instruments, Dallas, Tx) software was used as the interface for data acquisition.

32-channel digital I/O module

+ Open protocol
+ Expand
4

Barbell Displacement Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
During all testing, 4 linear position transducers (LPTs) (PT5A-150 Celesco; Measurement Specialties, Chatsworth, CA) were attached to the barbell on the inside of both collars. The LPTs were mounted above in anterior, posterior, left, and right positions, forming 2 triangles when attached to the barbell, which enabled measurement of horizontal and vertical bar displacement ( 9). Voltage outputs from the LPTs were converted into displacement and time data, which were sampled at 1,600 Hz using a custom-built interface box with an analogto-digital card (NI cDAQ-9174; National Instruments, Austin, TX). Initiation of movement for data analysis began when velocity or displacement increased above 0.01 m•s -1 or 0.01 m, respectively, and terminated when velocity decreased to less than 0.01 m•s -1 . LabVIEW full development system (Version 8.2, National Instruments, Austin, TX) was used for all data collection and calculations. Eccentric time under tension (ETUT) and total time under tension (TTUT) were obtained for all repetitions.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!