The largest database of trusted experimental protocols

Au1000

Manufactured by Olympus
Sourced in Japan

The AU1000 is a clinical chemistry analyzer designed for use in medical laboratories. It is capable of performing a wide range of routine and specialized clinical chemistry tests, providing accurate and reliable results. The AU1000 utilizes proven analytical technologies to deliver efficient and high-throughput testing.

Automatically generated - may contain errors

32 protocols using au1000

1

Quantifying Liver Enzyme Levels

Check if the same lab product or an alternative is used in the 5 most similar protocols
Alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels in the collected serum were analyzed using an automated clinical analyzer (OLYMPUS AU1000; Olympus, Tokyo, Japan).
+ Open protocol
+ Expand
2

Serum Enzyme Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
After blood collection, serum was separated by centrifugation at 2,000 rpm for 10 minutes at room temperature. Serum aspartate aminotransferase (AST) and alanine aminotransferase (ALT) were tested using an automated chemistry analyzer (Olympus AU1000; Olympus Corporation, Tokyo, Japan).
+ Open protocol
+ Expand
3

Serum Biomarker Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
After taken from their hearts, blood samples were placed at 4°C for 4-5 hours, and then, serum was separated by centrifuging at 4600 ×g for 10 minutes, finally storing at −80°C. The levels of serum ALT and AST were measured using an automated chemical analyzer (Olympus AU1000, Olympus, Tokyo, Japan). The plasma levels of TNF-α and IL-6 were measured using ELISA kits following the appropriate protocols.
+ Open protocol
+ Expand
4

Liver Enzyme Assays and Hydroxyproline

Check if the same lab product or an alternative is used in the 5 most similar protocols
Serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) were determined using an automated chemistry analyzer (Olympus AU1000; Olympus Corporation, Tokyo, Japan). Hydroxyproline and LN were determined using kits according to the manufacturers’ instructions.
+ Open protocol
+ Expand
5

Liver Function and Injury after I/R

Check if the same lab product or an alternative is used in the 5 most similar protocols
To detect liver function and cellular injury following liver I/R injury, sALT and sAST levels were measured using the automated clinical analyzer (OLYMPUS AU1000; Olympus, Tokyo, Japan).
+ Open protocol
+ Expand
6

Serum Separation and Enzyme Measurement

Check if the same lab product or an alternative is used in the 5 most similar protocols
After blood collection, serum was separated by centrifugation at 4,300× g for 10 minutes at room temperature. Serum AST and ALT were measured by an automated chemistry analyzer (Olympus AU1000, Olympus, Tokyo, Japan).
+ Open protocol
+ Expand
7

Serum Biomarkers of Liver IRI

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were collected by removing the eyes. Serum was separated from the blood by centrifugation at 2,000× g at 4°C for 10 min and stored at −80°C. Serum levels of ALT and AST were measured in an automated chemical analyzer (Olympus AU1000, Olympus, Tokyo, Japan) to evaluate liver IRI. Serum levels of IL-6 and TNF-α were measured using ELISA kits according to the manufacturers’ protocols.
+ Open protocol
+ Expand
8

Liver Injury and Oxidative Stress Assessment

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood was obtained via cardiac puncture, and serum was isolated. To assess liver function and cellular injury following liver I/R, serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels were measured using the automated chemistry analyzer (OLYMPUS AU1000; Olympus, Tokyo, Japan). Liver tissues (cephalad lobes) were fixed in neutral buffered formalin, embedded in paraffin, and sections (5 μm) stained with hematoxylin and eosin (H&E) for histological analysis. The severity of liver I/R injury was graded blindly using Suzuki’s criteria on a scale from 0 to 4. Samples with no necrosis, congestion, or centrilobular ballooning were given a score of 0 while severe congestion and > 60% lobular necrosis were assigned a value of 4. In addition, endothelial dysfunction was scored as follows: 0, absent; 1, mild endothelial dysfunction; 2, severe endothelial dysfunction; 3, 2 + infiltration of regenerating endothelial cells and inflammatory cells; and 4, 3 + vascular stenosis. For assessing the oxidation–reduction status of liver, the malondialdehyde (MDA) level was measured via the thiobarbituric acid method using liver homogenates. MDA detection was conducted according to the manufacturer’s instructions with the aid of commercial kits (Nanjing Jiancheng Biological Institute, Jiangsu, China) and concentrations expressed as nanomoles per milligram of protein.
+ Open protocol
+ Expand
9

Serum Enzyme Quantification Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
After blood collection, serum was separated by centrifugation at 3000 rpm for 15 min at room temperature. Serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) were tested using an automated chemistry analyzer (Olympus AU 1000; Olympus Corporation, Tokyo, Japan).
+ Open protocol
+ Expand
10

Liver Function Biomarkers Evaluation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Serum levels of alanine transaminase (ALT), aspartate transaminase (AST), total bilirubin (TBIL), and total cholesterol (TCHO) were determined by an automated biochemical analyzer (Olympus AU1000; Olympus Corporation, Tokyo, Japan). Liver triglyceride (TG) levels were measured with a TG quantification kit according to a protocol provided by the manufacturer (cat. no. E1013, Applygen Technologies, Beijing, China). Total hepatic hydroxyproline content was measured with a commercial detection kit following the manufacturer's instructions (cat. no. A030, Jiancheng Biotechnology Company, Nanjing, China). 11 Fasting serum insulin (FINS) was measured using an Ultrasensitive Mouse Insulin ELISA kit (cat. no. EZRMI-13K, Millipore, Billerica, MA, USA). Homeostasis model assessment-insulin resistance (HOMA-IR) index was calculated based on the following formula: 12 HOMA-IR = (FINS (mU/l) × fasting serum glucose (mmol/l))/22.5.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!