The largest database of trusted experimental protocols

19 protocols using mtt kit

1

Evaluation of GRA's Anti-Proliferative Effects

Check if the same lab product or an alternative is used in the 5 most similar protocols
The anti-proliferative effects of GRA were determined using MTT assay as previously reported [46 (link)]. The gastric tumor cell lines BGC-823 and MKN-1 were seeded in 96-well plates and treated with serial dilutions of GRA (0, 50, 100, 150, 200 μM) (n = 10) for 4 h, 24 h and 48 h. The immortal gastric epithelia cell line GES-1 was used as a control. Cell viability was assessed using an MTT Kit (Promega, Madison, USA) and absorbance was measured at 490 nm using a micro plate reader (Thermo, MA, USA).
+ Open protocol
+ Expand
2

MTT-based Cell Proliferation Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell proliferation was evaluated with an MTT kit (Promega) complying with manufacturer's instructions. Thereafter, 3 × 103 cells were seeded in each well of a 24‐well plate and maintained in medium containing 10% FBS for 2 weeks, during which time the medium was replaced with MTT reagent every 4 days. Cell proliferation and viability were measured with absorbance at 490 nm.
+ Open protocol
+ Expand
3

Evaluating Neuronal Cell Viability with Aβ1-42

Check if the same lab product or an alternative is used in the 5 most similar protocols
The viability of SH-SY5Y and SK-N-SH cells with or without Aβ1-42 treatment was detected by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) kit (Promega Corporation, Madison, WI, U.S.A.). Briefly, SH-SY5Y and SK-N-SH cells (5Cor4 cells/well) were treated with different concentrations of Aβ1-42 (0, 5, 10, 20 μM) for 24 h or Aβ1-42 (10 μM) for different times (0, 12, 24, 48 h). Subsequently, MTT (20 μl, 5 mg/ml) was added to each well and maintained for 4 h. Next, dimethyl sulfoxide solution was added to dissolve the formazan crystals. The optical density (OD) at 490 nm was measured using the Microplate Reader (Thermo Fisher Scientific).
+ Open protocol
+ Expand
4

MTT Assay for Cell Viability

Check if the same lab product or an alternative is used in the 5 most similar protocols
A 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) kit was purchased from Promega (USA). MMP9, ERK1/2, and phosphorylated ERK1/2 (p ERK1/2) antibodies were purchased from Abcam (USA). An RNA extraction kit, reverse transcription kit, and quantitative polymerase chain reaction (qPCR) SuperMIX were purchased from TAKARA (Japan). Puerarin was purchased from Sigma (USA). Matrigel was purchased from BD (USA). The gene amplification instrument and fluorescence imaging system were obtained from Bio-RAD (USA). A microscopic imaging system (Leica, Germany) from Germany was also used.
+ Open protocol
+ Expand
5

MTT Cell Proliferation Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
A cell proliferation assay was carried out with a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) kit (Promega Corporation) following manufacturer’s recommendations. MDA-MB-231 cells were allowed to grow in a 96-well plate with 2×104 cells/well and then transfected with different plasmids for 24 h. Next, 50 µL MTT (5 mg/mL) was added and incubated for 4 h in a humidified atmosphere containing 5% CO2 at 37°C. The reaction was then terminated by removal of the supernatant without disturbing the cells and 150 µL of dimethylsulfoxide (DMSO) solution was added to the wells. After continuous shaking at room temperature for 15 min to dissolve the purple formazan crystals, the optical density (OD) at a wavelength of 490 nm of each well was examined with a microplate reader (Bio-Rad Laboratories Inc.).
+ Open protocol
+ Expand
6

Lipotoxicity effects on MIN6 cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
The viability of MIN6 cells expressing or not expressing CAV1 in lipotoxic in vitro conditions was assessed using the MTT kit (Promega, Madison, WI, USA). In brief, MIN6 cells were seeded in 96-well plates for 24 h, and then different concentrations (0.25, 0.5 and 1.0 mM) of palmitate or oleate were added for 24 h. At the end of this period, the MTT reagent was applied, following the manufacturer’s instructions. In the same way, viability was assessed in cells pre-incubated with MAPK inhibitors.
+ Open protocol
+ Expand
7

MTT Proliferation Assay for Neuroblastoma

Check if the same lab product or an alternative is used in the 5 most similar protocols
The MTT kit from Promega (Madison, WI, USA) was applied to assess proliferation NB cells. In short, the transfected NB cells (3×103 cells/well) were inoculated into 96-well plates (Corning Costar, Corning, NY, USA) and cultured at 37°C constant temperature with 5% CO2 for 24 h, 48 h and 72 h. Then, each well inoculated with transfected NB cells was added with 20 μL of MTT solution (5 mg/mL) at the appointed time and maintained for 4 h. The supernatants were discarded and dimethyl sulfoxide solution (100 μL) was replenished for the dissolution of the formazan crystal. In the end, the Microplate Absorbance Reader from Thermo Fisher Scientific (Waltham, MA, USA) was conducted to determine the color reaction at 490 nm.
+ Open protocol
+ Expand
8

Cell Proliferation Assay using MTT

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell proliferation was determined 48 h after transfection treatment using a 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) kit (Promega Corporation) in a 96-well plate. The results were subsequently analyzed at 0, 1, 2 and 3 day. For the analysis, first, the cell culture medium was aspirated from the 96-well plate, and the cells were gently washed with PBS twice, followed by the addition of 20 µl of 5 mg/ml MTT reagent. After 4 h of incubation, MTT was carefully removed without disturbing the cells and 150 µl of dimethylsulfoxide (DMSO) solution was added to the wells, which was followed by continuous shaking at room temperature for 15 min to solubilise the purple formazan crystals. Finally, the optical density of each well, including the blank well without cells, was measured at a wavelength of 490 nm in a multimode plate reader (Bio-Rad, USA). Each sample was assayed in triplicate.
+ Open protocol
+ Expand
9

MTT Assay for Anticancer Potency

Check if the same lab product or an alternative is used in the 5 most similar protocols
MTT assay was performed using HeLa, PC-3, LNCaP, parental HCT116, and HCT116HIF–1α–/–HIF–2α–/– cells. The HCT116 parental and knockout cells and the PC-3 and LNCap cells were cultured in Dulbecco’s modified Eagle’s medium (DMEM) or Roswell Park Memorial Institute Medium (rpmI1640) containing 10% fetal bovine serum and 100 U/mL penicillin and streptomycin and maintained at 37°C in a humidified incubator under 5% CO2. The cells (PC-3, 5×l03; LNCaP, HCT116 parental and knockout cells 8×103; HeLa, 104 cells/well) were seeded onto a 96-well plate and incubated overnight. Varying concentrations of purified adametizine A (1; up to 100 μM) were added to the wells. After incubation at 37°C for 48 or 72 h (HeLa), the cell viability was determined by MTT kit (Promega), following manufacture’s protocols. Alternatively, 10 μL of MTT (five mg/mL) in PBS was added and incubated for 4 h, followed by the aspiration of the medium. Dimethyl sulfoxide (DMSO, 100 μL) was added to each well to dissolve the MTT in the wells and the plate was agitated for 1 h. The optical density (OD) was measured at 570 nm using a UV/vis microplate spectrophotometer (BioTek or Spectramax). Three to six replications were performed per treatment. The IC50 value was determined by analyzing data with Excel or GraphPad Prism 5 (GraphPad Software, Inc.).
+ Open protocol
+ Expand
10

MTT Cell Viability Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were cultured in 96-well plates with DMEM containing 10% FBS. After HEC-23 treatment for 24 h, 15 μL of dye solution was added into each well. Then the plates were incubated at 37°C for 2 h in a humidified CO2 incubator. 100 μL of stop solution was added to each well, and the absorbance was recorded at 570 nm using a 96-well plate reader. A reference wavelength at 630 nm was used. The MTT kit was purchased from Promega (Cat# G4002).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!