Where noted, some printed parts were plasma treated using a BD-20AC laboratory corona treater (Electro-Technic Products, Chicago IL, USA). Printed parts were placed 3 mm below the plasma source and treated for 5 – 60 s immediately prior to surface silanization. For gas-phase deposition, 200 μL of neat tridecafluoro-1,1,2,2-tetrahydrooctyl trichlorosilane (Gelest Inc., Morrisville PA, USA) was placed in a vacuum desiccator in a small polypropylene dish, followed immediately by the printed parts, and a vacuum was applied for 2 hours at room temperature. For solvent deposition, the surface of the printed part was submerged in a 10% v/v solution of tridecafluoro-1,1,2,2-tetrahydrooctyl trichlorosilane in solvent (Fluorinert FC-40 (Sigma Aldrich) or 200 proof ethanol (Koptec) for 30 min at room temperature, unless otherwise specified. After silanization, surfaces were rinsed with 95% ethanol and DI water and dried with a nitrogen gun.
Tridecafluoro 1 1 2 2 tetrahydrooctyl trichlorosilane
Manufactured by Merck Group
Tridecafluoro-1,1,2,2-tetrahydrooctyl trichlorosilane is a specialty chemical compound used in the production of various laboratory equipment and tools. It serves as a key component in the manufacturing process, providing specific functional properties required for the intended applications. The detailed description and intended use of this product will be provided upon request.
Automatically generated - may contain errors
Lab products found in correlation
Fluorinert fc 40, by Merck Group (1 mentions)
Tridecafluoro 1 1 2 2 tetrahydrooctyl trichlorosilane, by Gelest (1 mentions)
Light mineral oil, by Merck Group (1 mentions)
Bovine serum albumin (bsa), by New England Biolabs (1 mentions)
Tween 20, by Merck Group (1 mentions)
Betaine, by Merck Group (1 mentions)
Mncl2, by Merck Group (1 mentions)
Tablets for 10 mm pbs solution, by Merck Group (1 mentions)
Methyl oeg4 nhsester, by Thermo Fisher Scientific (1 mentions)
Poly l lysine hydrobromide, by Merck Group (1 mentions)
3 trichlorosilyl propyl methacrylate, by Merck Group (1 mentions)
Ammonium persulfate ap, by Merck Group (1 mentions)
Poly dimethylsiloxane sylgard 184, by Dow (1 mentions)
Immobilized tcep disulfide reducing gel, by Thermo Fisher Scientific (1 mentions)
Nacl salt, by Merck Group (1 mentions)
Zeba spin desalting column, by Thermo Fisher Scientific (1 mentions)
Bovine serum albumin (bsa), by Merck Group (1 mentions)
Ethylene glycol dimethacrylate, by Merck Group (1 mentions)
2 hydroxyethyl methacrylate, by Merck Group (1 mentions)
Oligonucleotides, by Eurofins (1 mentions)
3 protocols using tridecafluoro 1 1 2 2 tetrahydrooctyl trichlorosilane
1
Surface Silanization of 3D Printed Parts
2
Fabrication and Characterization of Microfluidic Devices
3
Biofunctionalized Surfaces for Biosensing
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Poly-l -lysine hydrobromide (MW =
15–30 kDa by viscosity), EDC, NHS, tablets for 10 mM PBS solution
(pH 7.4), 3-trichlorosilylpropyl methacrylate, 2-hydroxyethyl methacrylate
(HEMA), ethylene glycoldimethacrylate (EGDMA), tridecafluoro-(1,1,2,2)-tetrahydrooctyl-trichlorosilane,
bovine serum albumin, ammonium persulfate (APS), and NaCl salt were
purchased from Sigma-Aldrich. Methyl-OEG4-NHS ester, biotin-OEG4-NHS ester, Mal-OEG4-NHS ester, the Zeba spin desalting
columns (7 kDa MWCO, 5 mL), the immobilized TCEP disulfide reducing
gel (tris[2-carboxyethyl] phospine hydrochloride immobilized onto
4%cross-linked beaded agarose), and the streptavidin-Fluorescein conjugate
were obtained from ThermoFisher Scientific. Oligonucleotides were
purchased from Eurofins Genomics and used as received. SiO2 QCM chips (with fundamental frequency of 5 MHz) were purchased from
Biolin Scientific. Poly(dimethylsiloxane) Sylgard 184 and curing agent
were used as received from Dow Corning. Ormostamp material and MA-T1050
were purchased from Microresist. The PNA probes were synthesized using
the materials and the procedure previously described for PNA2,52 (link) as briefly reported in theSupporting Information together with the characterization
of the newly synthesized PNA3 and PNA4.
15–30 kDa by viscosity), EDC, NHS, tablets for 10 mM PBS solution
(pH 7.4), 3-trichlorosilylpropyl methacrylate, 2-hydroxyethyl methacrylate
(HEMA), ethylene glycoldimethacrylate (EGDMA), tridecafluoro-(1,1,2,2)-tetrahydrooctyl-trichlorosilane,
bovine serum albumin, ammonium persulfate (APS), and NaCl salt were
purchased from Sigma-Aldrich. Methyl-OEG4-NHS ester, biotin-OEG4-NHS ester, Mal-OEG4-NHS ester, the Zeba spin desalting
columns (7 kDa MWCO, 5 mL), the immobilized TCEP disulfide reducing
gel (tris[2-carboxyethyl] phospine hydrochloride immobilized onto
4%cross-linked beaded agarose), and the streptavidin-Fluorescein conjugate
were obtained from ThermoFisher Scientific. Oligonucleotides were
purchased from Eurofins Genomics and used as received. SiO2 QCM chips (with fundamental frequency of 5 MHz) were purchased from
Biolin Scientific. Poly(dimethylsiloxane) Sylgard 184 and curing agent
were used as received from Dow Corning. Ormostamp material and MA-T1050
were purchased from Microresist. The PNA probes were synthesized using
the materials and the procedure previously described for PNA2,52 (link) as briefly reported in the
of the newly synthesized PNA3 and PNA4.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!