The largest database of trusted experimental protocols

12 channel phased array whole head coil

Manufactured by Siemens
Sourced in Germany

The 12-channel phased-array whole-head coil is a laboratory equipment designed for use in magnetic resonance imaging (MRI) systems. It is a specialized radio frequency (RF) coil that is used to transmit and receive the electromagnetic signals necessary for the acquisition of MRI images of the entire human head.

Automatically generated - may contain errors

4 protocols using 12 channel phased array whole head coil

1

Multimodal Brain Imaging Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Data were acquired using a 3-Tesla Siemens Tim Trio scanner (Siemens, Erlangen, Germany) with a 12-channel phased array whole-head coil. 3D T1-weighted magnetization prepared rapid acquisition gradient echo (MP-RAGE) anatomical images (TR = 2530 ms, TE = 3.39 ms, flip angle = 7°, 1.33 mm slice thickness, 1.3×1 mm2 in plane resolution) and T2* weighted EPI sequence functional images (TR = 2.0 sec, TE = 30 ms, flip angle = 90°, 3 mm3 resolution, 300 timepoints per run with 3 runs, tilt = 22° upward from AC-PC line to minimize distortion and signal dropout, interleaved acquisition, using prospective acquisition correction) (Thesen, et al., 2000 (link)) with full brain coverage were collected.
+ Open protocol
+ Expand
2

Hippocampal Volume Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Participants underwent MRI on a Siemens Trio-TIM 3 T scanner equipped with a 12-channel phased-array whole-head coil. High-resolution 3D T1-weighted multi-echo magnetization-prepared, rapid acquisition gradient echo anatomical images were collected with the following parameters: repetition time=2200ms; multi-echo echo times=1.54ms, 3.36ms, 5.18 ms, and 7 ms; flip angle 7°, 4x acceleration, 1.2×1.2×1.2 mm voxels. Region of interest (ROI) labeling was implemented using FreeSurfer v5.1. Hippocampus volume (HV) was collapsed across hemispheres and adjusted for estimated total intracranial volume (ICV): Adjusted HV (aHV) = raw HV—b (ICV —mean ICV), with b reflecting the regression coefficient when HV is regressed against ICV.
+ Open protocol
+ Expand
3

Hippocampal Volumes and Structural MRI

Check if the same lab product or an alternative is used in the 5 most similar protocols
MRI was completed on a Siemens Trio-TIM 3T scanner with a 12-channel phased-array whole-head coil. Structural T1 weighted images were acquired as magnetization-prepared rapid gradient-echo (MPRAGE) with the following acquisition parameters: TR/TE/TI = 2300/2.95/900ms, flip angle = 9°, 1.1x1.1x1.2mm resolution, 2X (GRAPPA) acceleration. Hippocampal volumes were collapsed across hemispheres and intracranial volume (ICV) controlled using: raw HV—b (ICV —mean ICV), b = unstandardized coefficient when HV is regressed against ICV. Region of interest labeling was derived using FreeSurfer v5.1 (Fischl, 2012 (link)). MRI was collected at baseline and 3-year follow-up.
+ Open protocol
+ Expand
4

High-Resolution 3D T1-Weighted MRI Acquisition

Check if the same lab product or an alternative is used in the 5 most similar protocols
Participants underwent MRI on a Siemens TrioTIM 3 T scanner equipped with a 12-channel phased-array whole-head coil. Head motion was restrained with a foam pillow and extendable padded head clamps. Earplugs were used to attenuate scanner noise. High-resolution 3D T1-weighted multi-echo magnetization-prepared, rapid acquisition gradient echo anatomical images were collected with the following parameters: TR = 2200 ms; multi-echo TEs = 1.54 ms, 3.36 ms, 5.18 ms, and 7 ms; FA = 7°, 4× acceleration, 1.2 × 1.2 × 1.2 mm voxels.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!