10 cm 1h loop coil

Manufactured by Rapid Biomedical

Sourced in Germany

The 10 cm 1H loop coil is a laboratory equipment designed for nuclear magnetic resonance (NMR) spectroscopy. It is a circular coil that is approximately 10 centimeters in diameter and is tuned to the 1H (proton) frequency. The primary function of this coil is to generate a radio frequency (RF) magnetic field and to detect the NMR signal from the sample being analyzed.

Automatically generated - may contain errors

Lab products found in correlation

Magnetom 7t scanner, by Siemens (3 mentions)

3 protocols using 10 cm 1h loop coil

7T MRI Phosphorus Imaging Protocol

Cited 1 time

Check if the same lab product or an alternative is used in the 5 most similar protocols

All experiments used a Magnetom 7T scanner (Siemens, Erlangen, Germany).
Localizers were acquired with a 10 cm ¹H loop coil (Rapid Biomedical,
Rimpar, Germany). This was replaced by a T/R switch and preamplifier module
(Virtumed LLC, MN, USA) connected to a 10-cm ³¹P transmit–receive
loop coil (21 (link)) for the ³¹P
acquisitions. The ³¹P coil was tuned and matched using an RF sweeper
(Morris Instruments Inc, Ottawa, Canada) for each subject. All subjects in this
study were recruited in a manner approved by the local Research Ethics
Committee.

Clarke W.T., Robson M.D, & Rodgers C.T. (2015). Bloch‐Siegert B1+‐mapping for human cardiac 31P‐MRS at 7 Tesla. Magnetic Resonance in Medicine, 76(4), 1047-1058.

+ Open protocol

+ Expand

High-field MRI Protocol for 31P Spectroscopy

Check if the same lab product or an alternative is used in the 5 most similar protocols

All experiments used a Magnetom 7T scanner (Siemens, Erlangen, Germany). Localizers were acquired with a 10 cm ¹H loop coil (Rapid Biomedical, Rimpar, Germany). This was replaced by a T/R switch and preamplifier module (Virtumed LLC, MN, USA) connected to a 10‐cm ³¹P transmit–receive loop coil 21 for the ³¹P acquisitions. The ³¹P coil was tuned and matched using an RF sweeper (Morris Instruments Inc, Ottawa, Canada) for each subject. All subjects in this study were recruited in a manner approved by the local Research Ethics Committee.

Clarke W.T., Robson M.D, & Rodgers C.T. (2015). Bloch‐Siegert B1+‐mapping for human cardiac 31P‐MRS at 7 Tesla. Magnetic Resonance in Medicine, 76(4), 1047-1058.

+ Open protocol

+ Expand

7T MRI Protocol for 31P Acquisitions

Check if the same lab product or an alternative is used in the 5 most similar protocols

Unless stated otherwise, the experiments below used a Magnetom 7T scanner (Siemens, Erlangen, Germany). Localizer images were acquired with a 10‐cm ¹H loop coil (Rapid Biomedical, Rimpar, Germany), which was replaced by a transmit/receive (T/R) switch and preamplifier module (Virtumed LLC, MN), connected to a 10‐cm ³¹P T/R loop coil for the ³¹P acquisitions, and the ³¹P coil was tuned and matched using an RF sweeper (Morris Instruments Inc., Ottawa, Canada) for each subject. All subjects were recruited in a manner approved by the local research ethics committee.

Clarke W.T., Robson M.D., Neubauer S, & Rodgers C.T. (2016). Creatine kinase rate constant in the human heart measured with 3D‐localization at 7 tesla. Magnetic Resonance in Medicine, 78(1), 20-32.

+ Open protocol

+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Revolutionizing how scientists
search and build protocols!