The largest database of trusted experimental protocols

Hypersil gold c18 analytical column

Manufactured by Thermo Fisher Scientific
Sourced in United States

The Hypersil Gold-C18 analytical column is a high-performance liquid chromatography (HPLC) column designed for the separation and analysis of a wide range of organic compounds. It features a spherical silica-based stationary phase with a C18 alkyl ligand bonded to the surface. The column provides efficient and reproducible chromatographic separations, making it suitable for a variety of analytical applications.

Automatically generated - may contain errors

4 protocols using hypersil gold c18 analytical column

1

Quantification of DA and 5-HT in Dialysate

Check if the same lab product or an alternative is used in the 5 most similar protocols
DA and 5-HT contents in the dialysate fractions were analyzed by HPLC with electrochemical detection. Chromatography was performed using an Ultimate 3000 System (Dionex, Sunnyvale, CA, USA), a Coulochem III electrochemical detector (model 5300; ESA, Chelmsford, MA, USA) with 5020 guard cell, 5014B microdialysis cell, and Hypersil Gold-C18 analytical column (3 × 100 mm; Thermo Scientific, Waltham, MA, USA). The mobile phase was composed of 0.1 M potassium phosphate buffer adjusted to pH 3.6, 0.5 mM EDTA, 16 mg/L 1-octanesulfonic acid sodium salt, and 2% methanol. The flow rate during analysis was set at 0.7 mL/min. The applied potential was + 600 mV for the guard cell, and E1 = − 50 mV and E2 = + 300 mV for the microdialysis cells, with a sensitivity set at 50 nA/V. The chromatographic data was processed by Chromeleon v. 6.80 (Dionex) software, run on a personal computer.
+ Open protocol
+ Expand
2

Extracellular Neurotransmitter Quantification

Check if the same lab product or an alternative is used in the 5 most similar protocols
Extracellular DA and 5-HT levels were analyzed using an Ultimate 3000 System (Dionex, Sunnyvale, CA, USA), electrochemical detector Coulochem III (model 5300; ESA, Chelmsford, MA, USA) with a 5020 guard cell, a 5040 amperometric cell and a Hypersil Gold C18 analytical column (3 μm, 100 × 3 mm; Thermo Fisher Scientific, Sunnyvale, CA, USA). The details of the method have been described elsewhere [29 (link),69 (link)]. The chromatographic data were processed by the Chromeleon v.6.80 (Dionex, Sunnyvale, CA, USA) software package run on a personal computer. The limit of detection of DA and 5-HT in dialysates was 0.002 pg/10 μL for DA and 0.01 pg/10 μL for 5-HT.
Glutamate and GABA levels in the extracellular fluid were measured by HPLC with electrochemical detection after the derivatization of samples with OPA/sulfite reagent to form isoindole-sulfonate derivatives, as previously described [29 (link),69 (link)]. The data were processed using Chromax 2005 (Pol-Lab, Warszawa, Poland) software on a personal computer. The limit of detection of glutamate and GABA in dialysates was 0.03 ng/10 μL and 6.4 pg/10 μL, respectively.
+ Open protocol
+ Expand
3

HPLC Analysis of Neurotransmitters

Check if the same lab product or an alternative is used in the 5 most similar protocols
DA and 5-HT contents in the dialysate fractions were analyzed by HPLC with electrochemical detection. Chromatography was performed using an Ultimate 3000 System (Dionex, Sunnyvale, CA, USA), a Coulochem III electrochemical detector (model 5300; ESA, Chelmsford, MA, USA) with a 5020 guard cell, a 5014B microdialysis cell and a Hypersil Gold-C18 analytical column (3 × 100 mm; Thermo Scientific, Waltham, MA, USA). The mobile phase was composed of 0.1 M potassium phosphate buffer adjusted to pH 3.6, 0.5 mM EDTA, 16 mg/L 1-octanesulfonic acid sodium salt, and 2% methanol. The flow rate during analysis was set at 0.7 mL/min. The applied potential of a guard cell was + 600 mV, while those of microdialysis cells were: E1 = − 50 mV and E2 = + 300 mV with a sensitivity set at 50 nA/V. The chromatographic data was processed by Chromeleon v. 6.80 (Dionex) software, run on a personal computer.
+ Open protocol
+ Expand
4

HPLC-EC Analysis of DA and 5-HT

Check if the same lab product or an alternative is used in the 5 most similar protocols
DA and 5-HT contents in the dialysate fractions were analyzed by HPLC with electrochemical detection. Chromatography was performed using an Ultimate 3000 System (Dionex, Sunnyvale, CA, USA), a Coulochem III electrochemical detector (model 5300; ESA, Chelmsford, MA, USA) with a 5020 guard cell, a 5014B microdialysis cell and a Hypersil Gold-C18 analytical column (3 × 100 mm; Thermo Scientific, Waltham, MA, USA). The mobile phase was composed of 0.1 M potassium phosphate buffer adjusted to pH 3.6, 0.5 mM EDTA, 16 mg/L 1-octanesulfonic acid sodium salt and 2% methanol. The flow rate during analysis was set at 0.7 mL/min. The applied potential of a guard cell was + 600 mV, while those of the microdialysis cells were E1 = -50 mV and E2 = + 300 mV with a sensitivity set at 50 nA/V. The chromatographic data were processed by Chromeleon v. 6.80 (Dionex) software, run on a personal computer.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!