The largest database of trusted experimental protocols

Xevo tq s

Manufactured by Waters Corporation
Sourced in United States, United Kingdom

The Xevo TQ-S is a high-performance triple quadrupole mass spectrometer designed for quantitative analysis. It features enhanced sensitivity, resolution, and mass accuracy to provide reliable and precise results for a wide range of applications.

Automatically generated - may contain errors

242 protocols using xevo tq s

1

Quantification of NVP Plasma Levels

Check if the same lab product or an alternative is used in the 5 most similar protocols
The NVP plasma concentrations were quantified using a tandem quadrupole mass spectrometer (LC/MS/MS) designed for ultra-high performance: Xevo TQ-S (Waters Corporation, Massachusetts) as described by Reddy et al[17 ] modified in our previous publication.[15 (link),16 (link)] Plasma samples were extracted using Bond Elut C18 cartridges, according to the manufacturer’s instructions (Agilent Technologies, California). The eluents were completely evaporated using Thermo Scientific Reacti-Vap evaporators (Thermo Fisher Scientific Inc., California) at 37°C for 30 minutes. This was then reconstituted using 100 µL of equal parts 1:1 acetonitrile and water, vortexed briefly, transferred into 50 mL capped vials, and placed into Xevo TQ-S (Waters Corporation) for quantification. Approximately 1 µL of the sample was injected automatically into the LC/MS/MS instrument and quantified within 5 minutes. NVP plasma concentrations were categorized as <3400 ng/mL (below the therapeutic range), 3400 to 6000 ng/mL (therapeutic range), or >6000 ng/mL (above the therapeutic range).[18 (link),19 (link)]
+ Open protocol
+ Expand
2

Quantifying Antiretroviral Plasma Levels

Check if the same lab product or an alternative is used in the 5 most similar protocols
The nevirapine and efavirenz plasma concentrations were measured using a tandem quadrupole mass spectrometer (LC/MS/MS) designed for ultrahigh performance: Xevo TQ-S (Waters Corporation, U.S. A) as described by Reddy et al.17 . Plasma samples were first subjected to a thorough in-house method for the inactivation of the HIV virus. Plasma samples were extracted using Bond Elut C18 cartridges according to the manufacturer’s instructions (Agilent Technologies, USA). The eluents were then completely evaporated using Thermo Scientific™ Reacti-Vap™ Evaporators (Thermo Fisher Scientific Inc., USA) at 37 °C for 30 min. This was then reconstituted using 100μl100 ul of equal parts 1:1 acetonitrile and water, vortexed briefly and transferred into 50 ml capped vials and placed into Xevo TQ-S (Waters Corporation, U.S. A) for quantification. Approximately 1 μl of the samples was injected automatically into the LC/MS/MS instrument and quantified within 5 min.
+ Open protocol
+ Expand
3

UPLC-MS/MS Pigment Profiling Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The samples were analyzed using a Waters UPLC Acquity H Class (Milford, MA, USA, 2010), instrument equipped with a quaternary pump (UPQSM), autosampler injector (UPPDALTC), and eʎ PDA (UPPDALTC) linked to Water Xevo TQ-S micro mass spectrometer detector. Water MassLynx V4.1 software was used for data acquisition and processing. The mass spectrometer detector was operated in positive ESI mode, with capillary voltage at 4.0 kV, 50 V cone voltage, 350 °C desolvation temperature, 150 °C source temperature, and 1 V of collision energy. The pigment extract was separated. The dry pigment extract was dissolved in C2H3N/CH3OH/CH2O2 (70:30:0.5, v/v/v). The analysis was carried out using two solvent phases. Solvent phase A CH2O2:H2O (99.9:0.1, v/v) and phase B C2H3N:CH3OH (85:15, v/v), and concentration gradients of these phases were applied: Gradient 1 (A:25%–B:75% (1 min)), Gradient 2 (A:30%–B:70% (1.1 min)), Gradient 3 (A:50%–B:50% (5 min)), Gradient 4 (A:50%–B:50% (10 min)), Gradient 5 (A:95%–B:5% (12.5 min)), Gradient 6 (A:95%–B:5% (13.5 min)), Gradient 7 (A:25%–B:75% (13.75 min)), and Gradient 8 (A:25%–B:75% (18 min)). The mass spectra were recorded in full scan mode over the range m/z 400–800.
+ Open protocol
+ Expand
4

Quantification of Metabolite Levels

Check if the same lab product or an alternative is used in the 5 most similar protocols
For detection by Chugai Pharmaceutical Corporate, Ltd, the collected incubating media were extracted by adding acetonitrile/isopropanol (1/1, v/v) containing an internal standard, and were analyzed using AQUITY UPLC (Waters Corp.) and XevoTQ-S (Waters Corp.) and YMC-Triart column (30×2.0 mm I.D., YMC Co., Ltd).
For detection by Taisho Pharmaceutical Co., Ltd, the collected incubating media were mixed with 0.1% formic acid containing acetonitrile with the internal standard and analyzed using a system consisting of a TripleQuad 5500 (AB Sciex, Foster City, USA) and an HPLC system consisting of two LC-30AD series HPLC pumps, a SIL-30AC autosampler, a CTO- 20AC column oven (Shimadzu, Kyoto, Japan) and a Shim-pack XR-ODS 3.0×30 mm, 2.2-µm column (Shimadzu, Kyoto, Japan).
For detection by Toray Industries, Inc., the collected incubating media were extracted by adding acetonitrile containing an internal standard, and were quantified by LC/MS/MS with the liquid chromatography, ACQUITY UPLC I-class system (Waters Corp.) and the mass spectrometer, API-5000 (SCIEX), using CAPCELLPAK C18 MGIII, 50×2.0 mm, 5 µm column (Shiseido Co. Ltd.).
+ Open protocol
+ Expand
5

Targeted LC-MS/MS Metabolite Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Xevo TQ-S (Waters, USA) was utilized for the analysis of all biological samples. Chromatographic separation was conducted on Waters ACQUITY UPLC HSS T3 1.8 μm column (2.1 mm × 100 mm). Column temperature was 45°C and the flow rate was 0.5ml/min. Room temperature was 20 ± 2°C. Phase A consisted of water and 0.1% formic acid (v/v), and phase B consisted of acetonitrile (ACN) 0.1% formic acid (v/v). Column separation was performed by gradient elution: 0-0.5 min, 10% B; 1-2 min, 90% B; 4 min, 10% B.
Electrospray ionization (ESI) and positive ion V mode were used to determine the samples. The main parameters for mass spectrum were set as follows: capillary voltage: 3.5 kv; sample cone: 60 v; source offset: 50 v; source temperature: 150°C; desolvation temperature: 350°C; cone gas flow: 150 L/h; desolvation gas flow: 650 L/h; injection volume: 5 μL.
+ Open protocol
+ Expand
6

Quantification of Caffeine and Metabolites

Check if the same lab product or an alternative is used in the 5 most similar protocols
Plasma levels of caffeine, paraxanthine, theophylline and theobromine were quantified by ultra-high performance liquid chromatography (Waters ACQUITY UPLC system) coupled to a tandem quadrupole mass spectrometer (Waters TQD with electrospray ionization or Waters Xevo TQ-S with UniSpray ion source). The method was validated according to international guidelines using a stable isotope-labeled internal standard for each analyte (detailed method available on request). Limit of quantification for all analytes was 5 ng/ml. Plasma samples were collected between December 2007 and August 2018. In order to estimate more precisely the exposure to caffeine and metabolites, and to reduce the heterogeneity due to various time intervals between caffeine intake and blood collections, the sum of caffeine, paraxanthine and theophylline was used in the analyses.
+ Open protocol
+ Expand
7

UPLC-MS/MS Method for Compound Quantitation

Check if the same lab product or an alternative is used in the 5 most similar protocols
UPLC-MS/MS was performed on a Micromass QuattroUltima triple-quadrupole mass spectrometer equipped with an ESI source (Xevo TQS, Waters, United States). Chromatography was performed on a reversed phase UPLC BEH C18 column (2.1 × 100 mm, 1.7 μm) from Waters Scientific. Mobile phases were methanol (A) and 4 mmol/l of ammonium acetate (B). The gradient program was as follows: 0–2 min, 10–90% A; 2–4 min, 90% A; 4–4.1 min, 90–10% A; 4.1–6 min, 10% A. The injection volume was 2 μl with a flow rate of 0.3 ml/min and the column temperature was maintained at 40°C. The instrument featured an ESI source and was operated in both positive and negative ion modes. Quantitation was performed using MRM. The source temperature was 150°C, and the desolvation gas temperature was 350°C. The desolvation gas and nebulizer gas (N2) were set at 650 and 50 l/h, respectively. The flow rate of the collision gas (Ar) was 0.14 ml/min.
+ Open protocol
+ Expand
8

Quantitative Lipidomic Analysis by UPLC-MS

Check if the same lab product or an alternative is used in the 5 most similar protocols
Extracted lipids were separated on a Waters I class UPLC equipped with a Waters CSH C18 column (length 100 mm, diameter 2.1mm, particle size 1.7 μm) using a gradient starting with 57% solvent A (50% methanol, 50% water) and 43 % solvent B (99% 2-propanol, 1% methanol), both solvents containing 10 mM ammonium formiate, 0.1% formic acid and 5 μM sodium citrate. For details see Table S1. The UPLC was coupled to an ESI-(QqQ)-tandem mass spectrometer (Waters Xevo TQ-S) for compound detection in +ESI MRM mode. De novo synthesized SLs were discriminated from steady state SLs by incorporation of 13C3,15N1-stable isotope labeled L-serine leading to an n+3 mass shift of the corresponding molecular ions and a corresponding n+2/n+3 mass shift of the product ions in MRM mode. For details see Table S2. Samples were injected and processed using MassLynx software, whereas mass spectrometric peaks were quantified according to their peak area ratio with respect to the internal standard using TargetLynx software (both v 4.1 SCN 843) both from Waters Corporation (Manchester, UK). Subsequently, quantification of ceramides, hexosylceramides, and sphingomyelins was adjusted to the length of the acyl-chain and dihydro(hexosyl)ceramide quantification was further adjusted by a factor calculated between the intensities external ceramides and dihydroceramidstandards of the same concentration.
+ Open protocol
+ Expand
9

HILIC-MS/MS Analysis of Tetrodontoxins

Check if the same lab product or an alternative is used in the 5 most similar protocols
HILIC-MS/MS analyses of TTXs were carried out using a Waters (Milford, MA, USA) Xevo TQ-S tandem quadrupole mass spectrometer coupled to a Waters Acquity UPLC H-Class.
A Waters ACQUITY UPLC Glycan BEH Amide Column, 130Å, 1.7 µm, 2.1 × 150 mm column was used. The analytical method was based on a method described by the EU-RL-MB and applied for the interlaboratory validation of HILIC-MS/MS for TTX in mussels, based on the method proposed by Turner [16 (link)] for the validation of PSP and TTX by HILIC-MS/MS. Chromatography conditions are described in Table 2.
The Waters Xevo TQ-S parameters were as follows: the capillary voltage was held at 3 kV, the desolvation temperature was 350 °C, the desolvation gas flow was 650 L/h, the polarity was positive and the MRM transitions are summarized in Table 3. The quantitation and confirmation m/z transitions used were 320.07 > 302.07 and 320.07 > 162.03, respectively. Figure 2 shows a chromatogram obtained following the analysis of TTX in a high-level calibration standard.
+ Open protocol
+ Expand
10

UPLC-MS/MS Assay for Atorvastatin Quantification

Check if the same lab product or an alternative is used in the 5 most similar protocols
Chromatographic analysis was performed on UPLC-MS/MS system consisting of Acquity UPLC coupled to a tandem mass spectrometry detector XEVO-TQS (Waters, USA) and Acquity UPLC BEH C18 (1.7 μm, 2.1 × 100 mm) column (Waters, USA). The mobile phase consisted of an acetonitrile:5 mM ammonium formate buffer solution (80:20, v/v) at 0.2 mL/min flow rate. The run time was 2.6 min; the sample volume injected was 2.0 μL. The column temperature was set to 40°C and autosampler cooler was set at 8°C. For ATO the mass spectrometer was set in multiple reactions monitoring (MRM) mode in ESI positive ionization mode. Collision energy and cone voltage were 12 and 19 V, respectively. Cone and desolvation gas flow rate were set to 150 and 600 L/min, respectively, using Argon as collision gas at flow rate of 0.15 mL/min. Tandem mass spectrometer was tuned to monitor range m/z 559.25 to m/z 440.30 transition for ATO and range m/z 330.10 to m/z 192.20 transition for the IS (paroxetine), with dwell time of 0.3 s. Multiple reaction monitoring (MRM) data were acquired and analyzed through MassLynx software (Waters, USA).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!