The largest database of trusted experimental protocols

Anti cd206 pe

Manufactured by BioLegend
Sourced in United States

Anti-CD206-PE is a fluorescently labeled monoclonal antibody that binds to the CD206 receptor, also known as the mannose receptor. CD206 is a cell surface glycoprotein expressed on the surface of various cell types, including macrophages, dendritic cells, and endothelial cells. The PE (Phycoerythrin) fluorescent label allows for the detection and analysis of CD206-expressing cells using flow cytometry or other fluorescence-based techniques.

Automatically generated - may contain errors

27 protocols using anti cd206 pe

1

Macrophage Immunophenotyping by Flow Cytometry

Check if the same lab product or an alternative is used in the 5 most similar protocols
Joint macrophages were prepared and filtered with a cell strainer. F4/80 macrophages were used as pan-macrophage markers, iNOS was used as a marker of M1 macrophages and CD206 was used as a marker of M2 macrophages [18 (link),31 (link),32 (link)]. Surface staining was performed using the following monoclonal antibodies: anti-F4/80 FITC (eBioscience), anti-CD206 PE (BioLegend, San Diego, CA, USA). Anti-iNOS allophycocyanin was purchased from BD Biosciences. For intracellular staining of iNOS, Cell Stimulation Cocktail (a cocktail of phorbol 12-myristate 13-acetate, ionomycin, brefeldin A and monensin from eBioscience) was added and cultured for the last 5 hours before flow cytometric analysis as previously described [25 (link)].
+ Open protocol
+ Expand
2

Comprehensive Immune Cell Profiling in Murine Tissues

Check if the same lab product or an alternative is used in the 5 most similar protocols
Peritoneal exudate cell (PEC) suspensions were blocked with Fc Block (BD Biosciences, San Jose, CA, USA) and subsequently stained with specific Abs including: anti-Ly6G FITC, anti-CD11cPE, anti-CD11b PerCP/CY5.5, Siglec-F PE, anti-c-kit APC, F4/80 APC, anti-CD4APC, anti-CD19 PerCP/Cy5.5, CD3PE (BD Biosciences, San Jose, CA, USA) and anti-CD206PE or anti-CD206 Alexa fluor 488 (Biolegend, USA). Cells were collected 4 hours after microparticle inoculation for analysis of phosphorylation of BTK (Y-551) or SYK (Y-348). Intracellular staining was performed using anti-mouse phospho-BTK/ITK (Y551/Y511) PE (eBiosciences, San Diego, CA, USA), anti-mouse phospho-SYK (Y-348) PE antibody (BD Biosciences, San Jose, CA, USA) and FOXP3/Transcription Factor Staining Buffer Set, which was used as per the manufacturer instructions (eBiosciences, San Diego,CA, USA). For CFSE-labeled cells, anti-CD4 PerCP (BD Biosciences, San Jose, CA, USA), and KJ1–26 PE (BD Biosciences, San Jose, CA, USA) were used to phenotype DO11.10 T cells and cell cycle progression was examined as previously discussed10 (link). For FACS analysis of whole synovial tissues, samples were digested at 37°C for 1 hour with 0.1% collagenase in RPMI supplemented with 10% FBS, 1000U/ml penicillin, 1000U/ml streptomycin, and 2nm L-glutamine. Single cell suspensions were then prepared and blocked and stained as described above.
+ Open protocol
+ Expand
3

Flow Cytometric Analysis of Immune Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
The population of each phenotype of immune cells in different groups was evaluated by using flow cytometric analysis as described previously [30 (link)]. In brief, splenocytes were stained with fluorescent antibodies, including anti-CD4-FITC, anti-CD25-PE, anti-Foxp3-PerCP, anti-CD11c-APC, anti-MHCII-FITC, anti-CD86-PE, anti-CD40-PE, anti-CD4-PE (eBiosciences, San Diego, USA), anti-IL-4-APC, anti-CD68-FITC, and anti-CD206-PE (BioLegend, San Diego, USA), according to the manufacturer’s instruction. The FlowJo software was used to analyze the percentages of various phenotypes of immune cells.
+ Open protocol
+ Expand
4

Lymph Node Cell Phenotyping in Murine Colitis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mesenteric lymph node cell suspensions were collected and prepared from Hp1’, and 2′ inoculated Villincre controls and VillinCre-A2BARfl/fl; washed; blocked with Fc Block; and stained with anti-CD4-APC (RM4-5,), anti-pSTAT6-PE (pY641). Phosphorylation of STAT6 at tyrosine 641 was detected by intracellular staining with PE-conjugated anti-phospho-STAT6 using PhosFlow Fix Buffer I and Perm Buffer III reagents. Peritoneal exudate cell (PEC) suspensions were blocked with Fc Block (BD Biosciences, San Jose, CA, USA) and subsequently stained with specific Abs, including anti-Ly6G FITC, anti-CD11b PerCP/CY5.5, Siglec-F PE, anti-c-kit APC, F4/80 APC, BD Biosciences, San Jose, CA, USA) and anti-CD206PE (Biolegend, USA). Cells were acquired on Fortessa X-20 Flow cytometer (BD Biosciences, San Jose, CA) and analyzed using FlowJo software (Becton Dickinson & Company, Ashland, OR)
+ Open protocol
+ Expand
5

Isolation and Characterization of Liver Macrophages

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mouse livers were perfused with HBSS via the portal vein and followed by 0.04% collagenase IV (C5138, Sigma, MO, USA). Perfused livers were dissected and teased upon 70-μm cell strainers, then suspended in 40 mL DMEM supplemented with 10% FBS. Non-parenchymal cells (NPCs) were separated from hepatocytes by centrifugation at 50 × g for 2 minutes three times. NPCs were plated in cell culture dishes in DMEM supplemented with 10% FBS, 10 mM HEPES, 2 mM GlutaMax, 100 U/mL penicillin, and 100 mg/mL streptomycin for 15 minutes at 37°C, then the non-adherent cells were removed. The CD45+F4/80+ macrophages adherent cells were used for Flow cytometry. Antibodies used were anti-CD45-PerCP/Cyanine5.5 (103131, Biolegend, CA, USA), anti-CD11b-BV510 (101263, Biolegend, CA, USA), anti-F4/80-APC (123116, Biolegend, CA, USA), anti-CD206-PE (141706, Biolegend, CA, USA) and anti-CD86-BV605 (105037, Biolegend, CA, USA). Cells stained with corresponding isotype control antibodies were used as controls. Data were analyzed using CytExpert software (Beckman, CA, USA).
+ Open protocol
+ Expand
6

Lymph Node Cell Phenotyping in Murine Colitis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mesenteric lymph node cell suspensions were collected and prepared from Hp1’, and 2′ inoculated Villincre controls and VillinCre-A2BARfl/fl; washed; blocked with Fc Block; and stained with anti-CD4-APC (RM4-5,), anti-pSTAT6-PE (pY641). Phosphorylation of STAT6 at tyrosine 641 was detected by intracellular staining with PE-conjugated anti-phospho-STAT6 using PhosFlow Fix Buffer I and Perm Buffer III reagents. Peritoneal exudate cell (PEC) suspensions were blocked with Fc Block (BD Biosciences, San Jose, CA, USA) and subsequently stained with specific Abs, including anti-Ly6G FITC, anti-CD11b PerCP/CY5.5, Siglec-F PE, anti-c-kit APC, F4/80 APC, BD Biosciences, San Jose, CA, USA) and anti-CD206PE (Biolegend, USA). Cells were acquired on Fortessa X-20 Flow cytometer (BD Biosciences, San Jose, CA) and analyzed using FlowJo software (Becton Dickinson & Company, Ashland, OR)
+ Open protocol
+ Expand
7

Isolation and Characterization of Immune Cells from Mouse Spinal Cord

Check if the same lab product or an alternative is used in the 5 most similar protocols
The spinal cord, dissected from mice transcardially perfused with PBS, was minced into 1 mm3 pieces in solution containing 1 mg/mL or 0.1 mg/mL collagenase IV (Worthington Biochemical Corporation, USA) plus 0.4 mg/mL DNase I (Roche, Switzerland), and incubated at 37 °C for 15 min. For isolation of immune cells and microglia, cells were resuspended in 37% Percoll (GE Healthcare, USA) and centrifuged at 780 × g for 20 min. After centrifugation, myelin debris was removed and the cell pellet was collected. Cells were incubated with anti-CD16/CD32 antibodies (eBioscience, USA) for blocking Fc receptors, and then stained with combinations of the following antibodies: anti-CD45-PE-Cy7, anti-CD45-APC-Cy7, anti-CD4-PE, anti-CD8a-FITC, anti-CD8a-APC-Cy7, anti-NK1.1-PErCP-Cy5.5, anti-NK1.1-PE, anti-CD11c-PE, anti-CD11b-APC-Cy7, anti-CD11b-PerCP-Cy5.5 (BD Biosciences, USA), anti-CD4-APC, anti-CD3e-PerCP-Cy5.5, anti-CD86-APC, anti-CD25-PE (eBioscience, USA), anti-CD11c-APC, anti-I-A/I-E (MHC class II)-FITC, anti-CD4-PE-Cy7, anti-CD4-APC, anti-CD68-PE, anti-H-2Kb/H-2Db (MHC class I)-PE, anti-CD206-PE, anti-CD178 (FasL)-PE, and Armenian Hamster IgG Isotype control-PE (BioLegend, USA). Flow cytometry was performed by using FACS Aria and FACS Verse flow cytometers (BD Biosciences, USA) and the data was further analyzed using FlowJo Software (FlowJo, LLC, USA).
+ Open protocol
+ Expand
8

BMP-2/CPC Modulation of Macrophage Phenotype

Check if the same lab product or an alternative is used in the 5 most similar protocols
BMP-2/CPC particles at different doses were crushed and placed in upper Transwell chambers. The M0 macrophages were seeded in bottom chamber and co-cultured with the BMP-2/CPC particles for the following 3 d. And then the upper chambers were discarded and fix the macrophages in bottom chamber with 4% polyformaldehyde at room temperature for 15 min, and washed with PBS for following incubating with mixture of antibodies (anti-CD86 APC and anti-CD206 PE, BioLegend, USA) for 30 min. The samples were tested on BD FACS Calibur (BD, USA). The data were analyzed with FlowJo software (TreeStar Inc., USA).
+ Open protocol
+ Expand
9

Pluronic F127 and Dopamine Hydrogel Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Triblock poly (ethylene oxide)-bpoly(propylene oxide)-b-poly(ethylene oxide) Pluronic F127 (EO106PO70EO106, Mav = 12,600) and dopamine hydrochloride (C8H11NO2·HCl, DA·HCl) were brought from Sigma-Aldrich. Ethanol (C2H6O) was purchased from Sinopharm Chemical Reagent Co., Ltd. 1,3,5-trimethylbenzene (C9H12), Calcium chloride, hydrogen peroxide (H2O2, 30 wt% solution in water), ammonia water (25–28%), N-2-hydroxyethyl piperazine-N′-2-ethanesulfonic acid (HEPES), Hyaluronic acid sodium salt from Streptococcus equi, Rhodamine B (RhB) and dichloride [Ru(dpp)3]Cl2 were purchased from Aladdin (Shanghai, China). The lactate assay kit was brought from Nanjing Jiancheng Bioengineering Institute. Cell Counting Kit-8 (CCK-8), the Annexin V-FITC Apoptosis Detection Kit, and the Calcium Colorimetric Assay Kit were obtained from Beyotime Biotechnology Co., Ltd. Anti-CD16/32, anti-CD45-PE, anti-CD11b-APC, anti-CD11c-APC anti-F4/80-PE/Cy7, anti-CD80-FITC, anti-CD206-PE, anti-CD86-PE, anti-MHCII-V450, anti-CD3-APC, anti-CD4-FITC, and anti-CD8-PE/Cy7 were purchased from BioLegend. ELISA kits were purchased from Dakewei Biotech Co., Ltd.
All chemicals were of analytical grade and used without further purification. Deionized water (18.2 MΩ·cm resistivity at 25 °C) was used for all experiments.
+ Open protocol
+ Expand
10

Monocyte Immunophenotyping by Flow Cytometry

Check if the same lab product or an alternative is used in the 5 most similar protocols
Isolation of white blood cells was performed by centrifuging blood samples previously collected in tubes containing EDTA (Vacutainer™, BD Diagnostics, NJ, USA) at 1800 g for 10 min. Then, white blood cells were placed in 1.6 mL pyrogen-free Eppendorf tubes containing 1 mL ACK Lysing Buffer (Life Technologies, USA) and incubated at 4°C for 5 min. Afterward, cell suspension was centrifuged at 1800 g/4°C for 10 min and cell pellets washed twice with PBS 1x (Sigma-Aldrich, Mexico). After an additional centrifugation step and removal of the supernatant, cell pellets were resuspended in 50 μL PBS 1x (Sigma-Aldrich, Mexico). Immediately after, 3 μL Human TruStrain Reagent (BioLegend Inc., USA) was added to 2 × 105 white blood cells and then incubated for 10 min at 4°C. Then, each cell suspension was incubated with anti-CD14 PE/Cy7, anti-CD16 FITC, anti-CD11c APC, and anti-CD206 PE (BioLegend Inc., USA) for 30 min at 4°C. Flow cytometry analysis was performed on a FACSCanto II flow cytometer by using the BD FACSDiva™ software 6.0 (BD Biosciences, Mexico), acquiring 1 × 105 monocyte events per test in duplicate.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!