Log In Sign up
The largest database of trusted experimental protocols

Isopropyl alcohol

Manufactured by Samchun
Visit Supplier
Sourced in United States

Isopropyl alcohol, also known as 2-propanol, is a colorless, flammable liquid. It is commonly used as a solvent and cleaning agent in various laboratory applications.

Automatically generated - may contain errors

Lab products found in correlation

Ethanol, by Samchun (3 mentions) Chloroform, by Samchun (2 mentions) Acetone, by Samchun (2 mentions) Methanol, by Samchun (2 mentions) Sodium hydroxide (naoh), by Samchun (2 mentions) Potassium carbonate, by Merck Group (1 mentions) Toluene, by Samchun (1 mentions) Tetrahydrofuran, by Samchun (1 mentions) Polyvinylpyrrolidone, by Merck Group (1 mentions) Titanium 4 butoxide, by Merck Group (1 mentions) Barium chloride dihydrate, by Merck Group (1 mentions) Barium nitrate, by Merck Group (1 mentions) Acetic acid ch3cooh, by Merck Group (1 mentions) Ethyl alcohol, by Samchun (1 mentions) Milli q reference water purification system, by Merck Group (1 mentions) Dimethyl sulfoxide d6 dmso d6, by Cambridge Isotopes (1 mentions) Sodium chloride (nacl), by Merck Group (1 mentions) Calcium chloride, by Merck Group (1 mentions) Monochloroacetic acid, by Merck Group (1 mentions) L tyrosine, by Merck Group (1 mentions)

Close spelling variants of this product

Isopropyl alcohol (IPA) (6 citations)

7 protocols using isopropyl alcohol

1

Epoxy-Functionalized Silane Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane (ECTMS, 97%) was purchased from Gelest (Philadelphia, PA, USA). Tetramethylammonium hydroxide (TMAH, 10 wt% in water) was purchased from TCI (Tokyo, Japan). Isopropyl alcohol (IPA, 99.9%), toluene, tetrahydrofuran (THF, 99.9%), chloroform (99.8%), and water were purchased from Samchun (Seoul, Korea). All organic solvents were HPLC grade. Potassium carbonate (PC, 99%) was purchased from Sigma-Aldrich (St. Louis, MO, USA). Irgacure 250 (photoinitiator) was purchased from Shinyoung Rad Chem (Seoul, Korea).
Leem J.T., Seok W.C., Yoo J.B., Lee S, & Song H.J. (2021). Hard Coating Materials Based on Photo-Reactive Silsesquioxane for Flexible Application: Improvement of Flexible and Hardness Properties by High Molecular Weight. Polymers, 13(10), 1564.
+ Open protocol
+ Expand
2

Synthesis of Barium Titanate Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Titanium(iv) butoxide (Ti(C4H9O)4, reagent grade, 97%), barium chloride dihydrate (BaCl2·2H2O, ACS reagent, ≥99%), barium nitrate (Ba(NO3)2, ACS reagent, ≥99%), polyvinylpyrrolidone ((C6H9NO)n, Mw = 10 000), acetic acid (CH3COOH, glacial, ACS reagent, ≥99.7%) was purchased from Sigma-Aldrich (Saint Louis, USA). Barium hydroxide monohydrate (Ba(OH)2·H2O, 95%) was purchased from Alfa Aesar (Massachusetts, USA), sodium hydroxide, bead (NaOH, >98.0%), hydrogen peroxide (H2O2, 34.5%), ethyl alcohol (EtOH, C2H5OH, 94.5%) and isopropyl alcohol (C3H7OH, 99.5%) were purchased from Samchun Chemicals (Pyeongtaek-si, South Korea). Poly(dimethylsiloxane) (PDMS, (C2H6OSi)n, Sylgard™ 182 Silicone Elastomer) was purchased from Dow Silicones Corporation (Midland, MI USA), barium titanate (Spherical BT, 99.9%, 100 nm, Cubic) was purchased from US Research Nanomaterials, Inc. (Houston, TX USA). Deionized water (DI water) was used.
Kim T., Lim H., Lee Y, & Kim B.J. (2020). Synthesis of BaTiO3 nanoparticles as shape modified filler for high dielectric constant ceramic–polymer composite. RSC Advances, 10(49), 29278-29286.
+ Open protocol
+ Expand
3

Formulation and Characterization of Celecoxib Tablets

Check if the same lab product or an alternative is used in the 5 most similar protocols
Celecoxib (CEL) manufactured by Jiangxi Synergy, China, was kindly gifted from Daehwa Pharm. Co., Ltd. (Seongnam-si, Gangwon-do, Korea).
Adipic acid (ADI) was purchased from Daejung Chemicals & Metals Co., Ltd. (Siheung, Gyeonggi, Korea). Saccharin (SAC) was purchased from Acros Organics (Seoul, Korea).
Ethanol, acetone, mEthanol, isopropyl alcohol, and chloroform were purchased from Samchun Chemicals (Pyeongtaek-si, Gyeonggi, Korea).
Dimethyl sulfoxide-d6 (DMSO-d6) was purchased from Cambridge Isotope Laboratories, Inc. (Boston, MA, USA).
Spray-dried lactose monohydrate and Microcrystalline cellulose (Avicel® PH 101) were obtained from Whawon Pharm. Co., Ltd. (Seoul, Korea).
Sodium starch glycolate (SSG) was obtained from Whawon Pharm. Co., Ltd. (Seoul, Korea). Cross-linked carboxy methyl cellulose sodium (cross-linked NaCMC) (Ac-Di-Sol®) was purchased from Ashland (Wilmington, DE, USA). Cross-linked polyvinyl N-pyrrolidone (cross-linked PVP) (Kollidon® CL) was purchased from BASF SE (Ludwigshafen, Germany).
Mg stearate was obtained from Whawon Pharm. Co., Ltd. (Seoul, Korea).
Water was purified using Milli-Q® Reference water purification system (Merck Millipore, Alsace, France).
Hong S.H., Dinh L., Abuzar S.M., Lee E.S, & Hwang S.J. (2022). Synthesis of Celecoxib-Eutectic Mixture Particles via Supercritical CO2 Process and Celecoxib Immediate Release Tablet Formulation by Quality by Design Approach. Pharmaceutics, 14(8), 1549.
+ Open protocol
+ Expand
4

Bleached Eucalyptus Pulp Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
Never-dried bleached eucalyptus
kraft pulp (79.4 ± 0.6% cellulose, 18.8 ± 0.2% hemicellulose,
and a small amount of lignin and byproducts) was supplied by Moorim
P&P (Ulsan, Korea). Bananas and red cabbage (Brassica
oleraceaL. var. capitata f. rubra) were purchased from a local market. Methanol (99.5%, Samchun, Seoul,
Korea), ethanol (anhydrous 99.9%, Samchun), isopropyl alcohol (99.5%,
Samchun), sodium hydroxide (98%, Samchun), monochloroacetic acid (MCA
≥ 99.0%, Sigma-Aldrich, St. Louis, MO), sodium chloride (≥99.0%,
Sigma-Aldrich), magnesium chloride (anhydrous ≥ 98.0%, Junsei,
Tokyo, Japan), calcium chloride (anhydrous ≥ 97.0%, Sigma-Aldrich),
1,1-diphenyl-2-picrylhydrazyl (free radical ≥ 97.0%, TCI, Tokyo,
Japan), and l-tyrosine (≥98.0%, Sigma-Aldrich) were
also purchased.
Kwak H., Kim J., Lee E.J, & Hyun J. (2023). Enhanced Preservation of Climacteric Fruit with a Cellulose Nanofiber-Based Film Coating. ACS Omega, 9(1), 1069-1076.
+ Open protocol
+ Expand
5

Fabrication of LWIR Transparent Substrates

Check if the same lab product or an alternative is used in the 5 most similar protocols
A germanium window with AR coating purchased from IRKen was used as an LWIR transparent substrate. Double-side polished (DSP) silicon wafers purchased from iTASCO were used as an IR transparent substrate. Acetonitrile, propylene carbonate, pyridine, 3,4-ethylenedioxythiophene (EDOT), and lithium perchlorate were purchased from Aldrich. Acetone and isopropyl alcohol were purchased from Samchun. Iron(III) p-toluenesulfonatehexahydrate (Fe tosylate) and 1-butanol were purchased from Aldrich.
Kim B., Koh J.K., Park J., Ahn C., Ahn J., Kim J.H, & Jeon S. (2015). Patternable PEDOT nanofilms with grid electrodes for transparent electrochromic devices targeting thermal camouflage. Nano Convergence, 2(1), 19.
+ Open protocol
+ Expand
6

Synthesis of Pt-based Catalyst

Check if the same lab product or an alternative is used in the 5 most similar protocols
The reagents for the synthesis were used without purification. H2PtCl6 xH2O (10 wt %, T&I Chem, Incheon, Korea) as a Pt precursor, glycerol (99%, DAEJUNG, Siheung-si, Korea) as a dispersant, and isopropyl alcohol (99.5%, IPA, SAMCHUN, Seoul, Korea) as a radical scavenger, and KETJEN BLACK (KB300J, Carbon Black, LION, Tokyo, Japan) as a support were purchased, and deionized (D.I.) water obtained from a tertiary distilled water generator (Angstroms Co., Sejong, Korea) was used as a solvent.
Shin J., Min J., Kim Y., Lee J.H., Chai G, & Jung N. (2020). Facile Strategy for Mass Production of Pt Catalysts for Polymer Electrolyte Membrane Fuel Cells Using Low-Energy Electron Beam. Nanomaterials, 10(11), 2216.
+ Open protocol
+ Expand
7

Enzymatic Synthesis of Cellulose Esters

Check if the same lab product or an alternative is used in the 5 most similar protocols
Microcrystalline cellulose (MCC), 1-ethyl-3-methylimidazolium acetate ([Emim][Ac]), 40% tetrabutylammonium hydroxide (TBAH), 40% tetrabutylphosphonium hydroxide (TBPH), thiourea, Span® 85, iron oxide (Fe2O3), lipase from Candida rugosa (Type VII, 1176 U/mg), p-nitrophenyl butylate, and p-nitrophenol were purchased from Sigma Aldrich (St. Louis, MO, USA). Sodium hydroxide, ethanol, hexane, isopropyl alcohol, Congo red, and water (HPLC grade) were obtained from Samchun Pure Chemical (Gyeonggi-do, Korea). Soybean oil was purchase from SAJO Daerim (Incheon, Korea). All other chemicals used were of analytical grade and were used without further purification.
Park S., Oh Y., Jung D, & Lee S.H. (2020). Effect of Cellulose Solvents on the Characteristics of Cellulose/Fe2O3 Hydrogel Microspheres as Enzyme Supports. Polymers, 12(9), 1869.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!