The largest database of trusted experimental protocols

15 protocols using cesium acetate

1

Synthesis of Cesium-based Nanocrystals

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cesium acetate (CsOAc, 99.9%), 1-octadecene (ODE, 90%), hydrobromic acid (48% wt.), hydrochloric acid (37% wt.), hydroiodic acid (57% wt.) and hexane were purchased from Sigma Aldrich (Madrid, Spain). Oleic acid (OLA, 90%) and iodine (>99.5%) were bought from Fluka (Bucharest, Romania), while oleylamine (80–90% C18) was produced by Acros Organics (New Jersey, USA). Absolute ethanol, ethyl acetate (p.A.) and toluene (p.A.) were purchased from Fisher Scientific (Madrid, Spain).
+ Open protocol
+ Expand
2

Synthesis of Silver Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
All reagents were purchased from Sigma-Aldrich and used without further purification: silver nitrate (AgNO3, 99%, metal basis), triphenylphosphine (PPh3, 99%), 1,3-benzene dithiol (SSR, 99%), sodium borohydride (NaBH4, 99.9%), cesium acetate (CH3COOCs, 99%), methylene chloride (CH2Cl2, HPLC, Sigma-Aldrich), methanol (CH3OH, HPLC, Sigma-Aldrich), N, N-dimethylformamide (DMF, HPLC, Sigma-Aldrich), N-methyl-2-pyrrolidone (NMP, HPLC, Sigma-Aldrich), tetramethylene sulfone (TMS, HPLC, Sigma-Aldrich), and ethyl ether ((C2H5)2O, HPLC, Sigma-Aldrich).
+ Open protocol
+ Expand
3

Synthesis of Colloidal Nanocrystals

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cesium acetate (Cs(OAc), 99.99%; Sigma-Aldrich, Tokyo, Japan), sodium acetate (Na(OAc), 99.995%; Sigma-Aldrich, Tokyo, Japan), indium acetate (In(OAc)3, 99.99%; Sigma-Aldrich, Tokyo, Japan), antimony acetate (Sb(OAc)3, 99.99%; Sigma-Aldrich, Tokyo, Japan), germanium (IV) chloride (GeCl4, 99.99%; FUJIFILM Wako Chemicals, Osaka, Japan), 1-octadecene (ODE, 90%; Sigma-Aldrich, Tokyo, Japan), oleic acid (OA, 90%; Sigma-Aldrich, Tokyo, Japan), oleylamine (OAm, 70%; Sigma-Aldrich, Tokyo, Japan), chlorobenzene (C6H5Cl, 99.0%; FUJIFILM Wako Chemicals, Osaka, Japan), hexane (C6H14, 96.0%; FUJIFILM Wako Chemicals, Osaka, Japan) were used as received without further purification.
+ Open protocol
+ Expand
4

Synthesis of Inorganic Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Lead(II) acetate trihydrate (99.999%, Sigma-Aldrich),
cesium acetate (99.99%, Sigma-Aldrich), benzoyl chloride (Bz-Cl, 99%,
Sigma-Aldrich), benzoyl bromide (Bz-Br, 97%, Sigma-Aldrich), sodium
iodide (99.5%, Sigma-Aldrich), decane (anhydrous, ≥99%, Sigma-Aldrich),
oleylamine (technical grade, 70%, Sigma-Aldrich), oleic acid (technical
grade, 90%, Sigma-Aldrich), octylamine (99%, Sigma-Aldrich), erucic
acid (analytical standard, ≥99.0%, Sigma-Aldrich Supelco),
hexane (puriss. p.a., ACS reagent, Sigma-Aldrich), ethyl acetate (puriss.
p.a., ACS reagent, Sigma-Aldrich). All chemicals were used without
further purification.
+ Open protocol
+ Expand
5

Ion Channel Modulation Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Nifedipine, NA, tetraethylammonium chloride (TEA), ACH, pyrazole-3 (Pyr3), bovine serum albumin (BSA), papain, collagenase H, dithiothreitol (DTT), dithioerythritol (DTE), cesium acetate, cesium chloride (CsCl), Mg-ATP, and agarose were purchased from Sigma (St. Louis, MO, USA). Nifedipine and Pyr3 were dissolved in dimethyl sulfoxide (DMSO), and other compounds were dissolved in the appropriate solutions used in the experiments.
+ Open protocol
+ Expand
6

Synthesis of Colloidal Nanocrystals

Check if the same lab product or an alternative is used in the 5 most similar protocols
All the reagents were used without further purification. Cesium acetate (CsOAc, 99.99%), silver acetate (AgOAc, 99%), sodium acetate (NaOAc, 99.99%), indium(iii) acetate (In(OAc)3, 99.99%), bismuth(iii) acetate (Bi(OAc)3, 99.99%), chlorotrimethylsilane (TMSCl, 98%), oleic acid (OA, 90%), and 1-octadecane (ODE, 95%) were purchased from Sigma-Aldrich. Oleylamine (OAm, 80–90%) was purchased from Kanto Kagaku. Toluene (99.5%), hexane (96%), and ethyl acetate (99.5%) were purchased from Wako Chemicals.
+ Open protocol
+ Expand
7

Platinum Catalyst Preparation and Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
Platinum on aluminum oxide was purchased from Alfa Aesar (LOT: F02R004, precise platinum content=4.86 wt %). Lithium acetate, potassium acetate, cesium acetate, potassium hydrogen carbonate, and potassium carbonate were obtained from Sigma Aldrich with a purity of 99.99 % and dried prior to use/weighing (120 °C, vacuum, at least 2 h). Lithium hydroxide (Merck, >98 %), sodium hydroxide (Merck, >99 %), potassium hydroxide (Merck, >85 %, rest H2O, K2CO3<1 %), and cesium hydroxide (Fluka, 95 %, rest H2O) were used as stock solution, the amount of hydroxide was determined by titration with 1 m HCl (Merck).
+ Open protocol
+ Expand
8

Steroid Analysis with Alkali Acetates

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polyalanine, testosterone, androsterone, α-estradiol, β-estradiol, epiandrosterone, cortisone, corticosterone, 11-deoxycortisol, lithium acetate, sodium acetate, potassium acetate, rubidium acetate, cesium acetate, and water were purchased from Sigma-Aldrich (St. Louis, MO, USA). Aldosterone, dehydroepiandrosterone (DHEA), methanol, and acetonitrile were purchased from Fisher Scientific (Pittsburg, PA, USA). Polyalanine was prepared at 12.5 μg/mL in 50% acetonitrile and 0.1% formic acid. Steroid solutions contained 50 μM of the given steroid and 100–150 μM of lithium acetate, sodium acetate, potassium acetate, rubidium acetate, or cesium acetate.
+ Open protocol
+ Expand
9

Colloidal Nanocrystal Synthesis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Zinc acetate (Zn(ac)2, 99.99%),
cesium acetate (Cs(ac), 99.99%), copper(I) acetate (Cu(ac), 97%),
manganese acetate (Mn(ac)2, 98%), 1-octadecene (ODE, 90%),
oleylamine (OLAM, 98%), oleic acid (OA, 90%), hexane (anhydrous, 95%),
ethyl acetate (99.9%), and benzoyl chloride (Bz-Cl, 98%) were purchased
from Sigma-Aldrich. All chemicals were used without any further purification.
+ Open protocol
+ Expand
10

Synthesis of Metal Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cesium
acetate (Cs(ac), 99.99%), zinc acetate
(Zn(ac)2, 99.99%), copper(I) acetate (Cu(ac), 97%), 1-octadecene
(ODE, 90%), oleylamine (OLAM, 98%), oleic acid (OA, 90%), benzoyl
chloride (Bz-Cl, 98%), hexane (anhydrous, 95%), and ethyl acetate
(99.9%) were purchased from Sigma-Aldrich. All chemicals were used
without any further purification.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!