The following chemicals were purchased from Sigma-Aldrich and were used without further purification: glucose oxidase (GOx) from Aspergillus niger (128.2 U∙mg−1 solid), laccase from Trametes versicolor (12.9 U∙mg−1 solid), N-hydroxysulfosuccinimide (NHS; 98%), N-ethyl-N’(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC; 98%), 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), multi-walled carbon nanotubes (MWCNTs; carboxylic acid-functionalized), sodium perchlorate (NaClO4, 98%), D-(+)-glucose, ferrocenemethanol (FcCH2OH), and indium tin oxide (ITO) glass (15 Ω.sq−1). Uric acid (99%), L-(+)-ascorbic acid (99+%), and 4-acetamidophenol (98%) were purchased from Alfa Aesar, South Korea. The aqueous solutions were prepared in deionized (DI) water. Polydimethylsiloxane (PDMS; Sylgard 184, Dow Corning, Midland, MI, USA) was mixed in a 10:1 ratio of base and curing agent. All analytical experiments were performed in a sodium phosphate buffer prepared with 50 mM NaH2PO4 and 50 mM Na2HPO4; the pH was adjusted by their proper mixing.
Indium tin oxide
Manufactured by Merck Group
Sourced in United States
Indium tin oxide (ITO) is a transparent conductive coating material. It is composed of indium oxide and tin oxide. ITO is primarily used as a transparent electrode in electronic devices such as liquid crystal displays, touchscreens, and solar cells due to its high electrical conductivity and optical transparency.
Automatically generated - may contain errors
Lab products found in correlation
D glucose, by Merck Group (1 mentions)
L ascorbic acid, by Thermo Fisher Scientific (1 mentions)
Uric acid, by Thermo Fisher Scientific (1 mentions)
Sylgard 184, by Dow (1 mentions)
Sodium perchlorate, by Merck Group (1 mentions)
Glucose oxidase gox, by Merck Group (1 mentions)
Laccase, by Merck Group (1 mentions)
N ethyl n 3 dimethylaminopropyl carbodiimide hydrochloride, by Merck Group (1 mentions)
N hydroxysulfosuccinimide, by Merck Group (1 mentions)
2 2 azino bis 3 ethylbenzothiazoline 6 sulfonic acid, by Merck Group (1 mentions)
Ferrocenemethanol fcch2oh, by Merck Group (1 mentions)
Milli q, by Merck Group (1 mentions)
Polystyrene sulfonate, by Merck Group (1 mentions)
Methylene blue, by Merck Group (1 mentions)
Anhydrous pyridine, by Merck Group (1 mentions)
Sodium hydroxide (naoh), by Merck Group (1 mentions)
Silver nitrate, by Merck Group (1 mentions)
Trisodium citrate dihydrate, by Merck Group (1 mentions)
Chloroauric acid, by Merck Group (1 mentions)
4 4 bipyridine, by Merck Group (1 mentions)
4 protocols using indium tin oxide
1
Electrochemical Biosensor Fabrication
2
Synthesis and Characterization of Gold Nanoparticles
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
The following chemicals were all sourced from Sigma Aldrich and used without modification or purification unless stated otherwise: trisodium citrate dihydrate (Na3C6H5O7), chloroauric acid (HAuCl4·3H2O), l -ascorbic acid (C6H8O6), silver nitrate (AgNO3), sodium chloride (NaCl), sodium hydroxide (NaOH), 11-mercaproundecanoic acid (C11H22O2S), methylene blue (C16H18ClN3S), pyridine anhydrous (C5H5N), 4,4′-bipyridine (C10H8N2), polystyrene sulfonate (PSS) ∼10 000 MW, and indium tin oxide (ITO) coated glass slides (surface resistivity of 30–60 Ω, 1-inch square). Poly(diallyl dimethylammonium chloride) (PDDA) ∼8500 MW was sourced from Polysciences Europe. All glassware and PTFE-coated stirrer bars used for nanoparticle synthesis experiments were soaked for at least 2 hours in aqua regia before being rinsed with water several times. Millipore MilliQ purified water was used in all experiments.
3
Preparation of Giant Unilamellar Vesicles
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
GUVs made of SM/DOPC (1:1) were prepared by the electroswelling technique as described previously (33 (link)). A volume of 30 μl of 1 mg/ml lipids dissolved in chloroform/methanol (3:1) was deposited in two glass plates coated with indium tin oxide (70–100 ohm resistivity, Sigma) and placed in the desiccators for at least 120 min for complete solvent evaporation. A U-shaped rubber piece of ∼1-mm thickness was sandwiched between the two indium tin oxide side slides. This chamber was filled with ∼400 μl of 200 mm sucrose and was exposed to 1.2 V AC current (12 Hz sinusoidal for 2 h, 5 Hz squared for 10 min). The resulting suspension was collected in a vial and used within several days.
4
Organic Synthesis Reagents Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Dichloromethane (DCM, 99.9%), isopropyl magnesium chloride lithium chloride complex (iPrMgCl·LiCl, 1.3 M in THF), trimethyl tin chloride (1 M in Hexane, 25 wt.%), acetone and deuterated chloroform (dCDCl3) were purchased from Acros Organics (Branchburg, NJ, USA). Hexane, methanol, toluene, hydrochloric acid (HCl), chloroform, acetonitrile and ethyl acetate were purchased from Fisher Scientific (Branchburg, NJ, USA). Ferrocene, tetraethylammonium tetrafluoroborate (Et4NBF4) and diethyl ether were obtained from Alfa Aesar (Ward Hill, MA, USA). Anhydrous tetrahydrofuran (THF), n-Butyllithium solution (n-BuLi, 2.5 M in Hexane), Benzo [1,2-b:4,5-b′]dithiophene-4,8-dione, tin(ll) chloride dihydrate, anhydrous sodium sulfate (>99%), indium tin oxide (ITO) glass substrate, 1,3-Bis(5-bromo-2-thienyl)-5,7-bis(2-ethylhexyl)-4H,8H-benzo [1,2-c:4,5-c′]dithiophene-4,8-dione (BDD, 97%), tetrakis(triphenylphosphine) palladium (Pd(PPh3)4) and Y6 were purchased from Sigma-Aldrich (Burlington, NJ, USA). Triethyl germanium chloride and 2-iodothiophene were obtained from TCI (Boston, MA, USA). Ethanol was obtained from EMD (Burlington, NJ, USA). Isopropyl alcohol was purchased from VWR (Missouri City, TX, USA). All materials were used as received without further purification.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!