The largest database of trusted experimental protocols

27 protocols using k 1000

1

Hematological and Biochemical Analyses in Fasted Rats

Check if the same lab product or an alternative is used in the 5 most similar protocols
After 45 days, 12 h-fasted animals were anesthetized with ether and the blood collected with and without anticoagulant (ethylene diamine tetra acetate) by retro-orbital puncture, using capillary tubes for hematological and biochemical studies, respectively (10 (link)). The following hematological parameters were determined with the Sysmex K-1000 fully automated hematology analyzer: Erythrocyte (RBC), total and differential leukocyte (WBC), neutrophil, lymphocyte, eosinophil, basophil, hematocrit (Hct), hemoglobin (Hb), platelet count, mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC), mean platelet volume (MPV), platelet distribution width (PDW), and red distribution width (RDW).
Blood samples for biochemical analyses were centrifuged at 3,000 × g for 5 min and plasma was collected and analyzed for glucose, creatinine, albumin, cholesterol, triglycerides, aspartate amino-transferase (AST), alanine aminotransferase (ALT), phosphorus, potassium, sodium, calcium, urea and total protein using a COBAS Mira S chemistry analyzer (Roche Diagnostic Systems, West Sussex, England).
+ Open protocol
+ Expand
2

Intracerebroventricular Venom Effects on Hematology

Check if the same lab product or an alternative is used in the 5 most similar protocols
The crude venom at a concentration of 6.25 mg/kg body weight was administered through intracerebroventricular injection into male Kunming mice, with each weighing 18−20 g. After 1 h and at 7 days, blood samples were collected. The serum was used for enzyme and electrolytical analyses. Potassium oxalate-sodium fluoride was used as an anticoagulant for blood sugar analysis. Various hematological parameters, including total leukocyte count, total erythrocyte count, hemoglobin, hematocrit value, mean corpuscular volume, mean corpuscular hemoglobin, mean corpuscular hemoglobin concentration, and platelet count were determined using an automated cell counter (K-1000, Sysmex, Kobe, Japan). Serum glutamic-oxaloacetic transaminase, lactate dehydrogenase, and alkaline phosphatase were assayed using an autoanalyzer (Erba Smart Lab, Daman, India) by using diagnostic kits (Biocon, VoehlMarienhagen, Germany; and Raichem, San Diego, CA, USA). Blood parameters were determined using the methodologies described in the manufacturers’ respective manuals for the analytical instruments.
+ Open protocol
+ Expand
3

Comprehensive Hematological and Clinical Chemistry Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Heparinized blood (2.5 mL) was subjected to hematological analysis using an automatic analyzer K-1000 (Sysmex; Kobe, Japan). The following parameters were determined: red blood cell count (RBC), white blood cell count (WBC), hemoglobin concentration (HGB), the hematocrit (HCT), mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC), platelet count (PLT), and the percentage of differentiated white blood cells including neutrophil (NEUT), lymphocyte (LYMPH), monocyte (MONO), eosinophil (EO), and basophil (BASO).
For clinical chemistry determination, serum was prepared from nonheparinized blood (5 mL). Glucose (GLU), blood urea nitrogen (BUN), creatinine (CRE), total protein (TP), albumin (ALB), total bilirubin (T-BIL), direct bilirubin (D-BIL), serum glutamic-oxaloacetic transaminase (SGOT), serum glutamine-pyruvic transaminase (SGPT), and alkaline phosphatase (ALP) were measured. These parameters were determined by the COBAS INTEGRA system (Roche Diagnostic System, Indianapolis, IN).
+ Open protocol
+ Expand
4

Comprehensive Blood Panel Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
The following hematological parameters were determined in EDTA whole blood by using an automatic blood cell counter (Sysmex K1000, Germany): RBC, white blood cells (WBC), and platelet and reticulocyte count, hematocrit (HCT) and hemoglobin (HGB) concentration, and hematimetric indices (mean cell volume [MCV], mean cell hemoglobin [MCH], and mean cell hemoglobin concentration [MCHC]). The following biochemical parameters were assessed in serum by using automatic validated methods and equipments (Hitachi 717 analyzer, Roche Diagnostics Inc., MA, USA): glucose, urea, creatinine, uric acid, aspartate aminotransferase (AST), alanine aminotransferase (ALT), triglycerides (TGs), and total cholesterol (Total-Chol).
+ Open protocol
+ Expand
5

Evaluating the Impact of DBT on Murine Blood and Splenocytes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Murine blood and spleens were collected to evaluate the influence of DBT to peripheral blood cells and splenocyte differentiation. The counts of peripheral blood cells were calculated by using a Sysmex K-1000 automated hematology analyzer (Sysmex American, Lincolnshire, IL, USA). The differentiation of splenocytes was evaluated by flow cytometry. The spleen was treated with 2 ml RBC lysis buffer to isolate splenocytes. The BD FACSCantoTM II system (BD, San Jose, CA, USA) was used for cytometry. Murine anti-CD3ε (BD, San Jose, CA, USA), anti-CD4 (BD, San Jose, CA, USA), anti-CD8a (BD, San Jose, CA, USA), anti-CD19 (BD, San Jose, CA, USA), and anti-CD56 (Bioss, Woburn, MA, USA) antibodies were used to label total T, Th, cytotoxic T (Tc), B, and natural killer (NK) cells, respectively. The antibodies were stained by FITC (fluorescein isothiocyanate) and PE (phycoerythrin).
+ Open protocol
+ Expand
6

Automated Platelet Enumeration Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The number of platelets was determined using an automated electronic particle counter (Sysmex, K-1000, and Kobe, Japan). For this purpose, 0.1 ml of PC was added to 0.4 ml of phosphate buffer saline (PBS).
+ Open protocol
+ Expand
7

Automated Blood Cell Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Two ml of blood was withdrawn by venipuncture using a sterile plastic syringe. This sample of blood was then delivered into a sterile plastic tube containing EDTA (disodium ethylenediaminetetraacetate) as an anticoagulant, then introduced into automatized counter (Sysmex K 1000) which directly gives Hb concentration, WBCs, RBCs, and platelets counts.
+ Open protocol
+ Expand
8

Comprehensive Metabolic Profile Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Fasting blood samples of approximately 5 ml for measuring complete blood count (Sysmex K-1000, Bohemia, NY, USA) and other factors were immediately centrifuged at 3000 g for 10 min. Serum levels of blood urea nitrogen (BUN), creatinine (Cre), fasting glucose, total cholesterol (TCH), triglyceride (TG), high-density lipoprotein cholesterol (HDL-cholesterol), and low-density lipoprotein cholesterol (LDL-cholesterol) were measured using an autoanalyzer (COBAS Integra 800, Roche Diagnostics, Basel, Switzerland). Blood samples were assayed for NT-proBNP by electrochemiluminescence immunoassay on the Elecsys 2010 Immunoanalyzer (Roche Diagnostics, Indianapolis, IN, USA).
+ Open protocol
+ Expand
9

Exercise-Induced Changes in Blood Cell Counts and CK-MM

Check if the same lab product or an alternative is used in the 5 most similar protocols
The blood samples were collected before exercise, 12 h and 24 h after exercise. These samples were placed into heparinized tubes and measured immediately for blood cell counts (Sysmex K-1000, NY, United States). The samples were then centrifuged at 3,000 × g for 10 min. After centrifugation, supernatant was collected and the level of CK-MM was measured within 1 hour by using an automatic biochemical analyzer (COBAS INTEGRA 800, Roche Diagnostics, Basel, Switzerland).
+ Open protocol
+ Expand
10

Comprehensive Blood Profiling Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total and differential leukocyte counts (neutrophils, lymphocytes, and a group of mixed cell types including monocytes, eosinophils and basophils) were counted in heparinized blood samples using a SYSMEX K1000 automatic counter (Sysmex Europe, Norderstedt, Germany). The analyses were performed consecutively at the time of the screening examination, at the central laboratory of Malmö University Hospital.
HbA1c and whole blood glucose was measured according to standard procedures at the Department of Clinical Chemistry. HbA1c was measured by ion exchange chromatography, with reference values of 3.9–5.3% in non-diabetic individuals. Insulin was measured by a radioimmunoassay in mIU/ L and the HOMA index was calculated as fasting insulin*glucose/22.5 [16 (link)]. CRP was analyzed using a high-sensitive assay, Tina-quant® CRP latex assay (Roche Diagnostics, Basel, Switzerland).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!