The largest database of trusted experimental protocols

Biograph 16 pet ct scanner

Manufactured by Siemens
Sourced in Germany, United States

The Biograph 16 PET/CT scanner is a diagnostic imaging device that combines positron emission tomography (PET) and computed tomography (CT) technologies. It is designed to capture detailed, high-quality images of the body's anatomy and metabolic processes.

Automatically generated - may contain errors

14 protocols using biograph 16 pet ct scanner

1

Standardized PET/CT Imaging Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
PET/CT scans were acquired after a single FDG injection. Patients fasted for 6 hours before the 18F-FDG injection (serum glucose level <180 mg/dL). FDG dose was corrected for body mass index at all centers. The scan was obtained from the subcranial region to the upper thigh (torso) 60 to 90 minutes after the injection. A low-dose CT acquisition without contrast enhancement (NE CT) was initiated first, followed by PET acquisition. Then, the CE CT scans were collected. Iterative reconstruction was done using ordered-subset expectation maximization software. The attenuation was corrected by NE CT. NE PET/CT was not performed at one institution, and CE PET/CT was used for attenuation correction in these patients (n=14).
The PET/CT machines used in this study were as follows: the Biograph TruePoint 40 PET/CT scanner (Siemens Medical Solutions, Knoxville, TN, USA) or the Biograph 16 PET/CT scanner (Siemens Medical Solutions), the Discovery ST PET/CT instrument (GE Medical Systems, Milwaukee, WI, USA), the Discovery ST PET/CT instrument (GE Medical Systems), the Discovery VCT PET/CT instrument (GE Medical Systems), and the Gemini TF (Philips-ADAC Medical Systems, Cleveland, OH, USA). The workstations used for reconstruction were the Syngo multimodality workplace, Exeleris Advanced Workstation 4.4 (GE Medical Systems).
+ Open protocol
+ Expand
2

FDG-PET/CT Imaging Protocol for Oncology Studies

Check if the same lab product or an alternative is used in the 5 most similar protocols
Patients fasted for at least six hours before FDG injection (370–444 MBq). Serum glucose level was measured before FDG injection. Scanning was performed 50–70 min after injection of FDG using a Biograph Duo PET/CT scanner (Siemens Healthcare, Erlangen, Germany) or a Biograph 16 PET/CT scanner (Siemens Healthcare, Erlangen, Germany). Patients were asked to rest before acquisition of PET/CT images. Before the PET scan, a low-dose CT scan (5 mm slices) at an interval of 5 mm was performed for attenuation correction and anatomic co-registration. Intravenous contrast material was not used. PET images were acquired using an acquisition time of 3 min per table position, with an approximate 28% overlap. Images were obtained from the skull base to the proximal thigh with the patient in supine position. Images were reconstructed by a 3D row-action maximum-likelihood algorithm for iterative and ordered-subset expectation maximization using the Biograph system. PET images were corrected for attenuation using a CT-derived transmission map. Voxel size after reconstruction was 2.65 × 2.65 × 2.65 mm.
+ Open protocol
+ Expand
3

PET/CT Imaging Protocol for Tumor Diagnosis

Check if the same lab product or an alternative is used in the 5 most similar protocols
All 109 patients were examined using a routine clinical protocol on an integrated PET/CT scanner (Biograph 16 PET/CT Scanner [Siemens Medical Solutions, Erlangen, Germany]). Patients were fasting for at least 12 hours. Sixty to ninety minutes after intravenous injection of a mean activity of 325 MBq (4 MBq or 108 μCi per kg body weight, range 224–426 MBq) [18F]FDG, a whole body PET/CT scanning (from the vertex of the skull to the groin), was performed in a 3D-mode (3 minutes per bed position). According to clinical indication, a low-dose or a diagnostic CT was performed. If a diagnostic CT was indicated, a nonionic iodinated X-ray contrast agent (Imeron 400, Bracco Imaging, Konstanz, Germany) was applied. Dosing and imaging procedures used were in accordance with German and European PET/CT guidelines for tumor imaging.[13 (link),14 ]
+ Open protocol
+ Expand
4

Assessing Brown Adipose Tissue Function

Check if the same lab product or an alternative is used in the 5 most similar protocols
Forty-eight to 72 h after the shivering threshold test, participants went to the Hospital Virgen de las Nieves in Granada (Spain) for the assessment of BAT volume, 18F-FDG uptake, and radiodensity. After resting in a warm room, they were placed in a cool room (19.5–20 °C) wearing the same cooling vest with the water temperature set at the personalized temperature, as explained above. After the first hour of cold exposure, the participants received an injection of 18F-FDG (~185 MBq) and the water temperature was increased by 1 °C to avoid shivering. The water temperature was also slightly increased at any time participants reported shivering. One hour later, they were subjected to 18F-FDG-PET/CT scanning in the supine position using a Siemens Biograph 16 PET/CT scanner (Siemens, Erlangen, Germany). Image acquisition covered an area of two BED positions from the atlas vertebra to thoracic vertebra 6, approximately. The natural calendar day when the baseline, and post-intervention PET/CT scan were performed was recorded from day 1 (January 1st) to day 365/366 (December 31st).
+ Open protocol
+ Expand
5

FDG-PET/CT Imaging Protocol for Oncology

Check if the same lab product or an alternative is used in the 5 most similar protocols
All patients fasted for at least 6 hours before intravenous injection of F-18 FDG and blood glucose levels of all patients were found to be below 126 mg/dl [14 (link)]. Approximately 5.5 MBq of F-18 FDG per kilogram of body weight was administered intravenously. Scanning was performed about 60 minutes after FDG administration. Images were obtained from the base of the skull to the proximal thigh using either a Biograph TruePoint 40 PET/CT scanner (Siemens Medical Solutions, Knoxville, Tennessee, USA) or a Biograph 16 PET/CT scanner (Siemens Medical Solutions). A CT scan was obtained first using a continuous spiral technique (120 kVp, 160 mA, 0.5 seconds rotation time). A PET scan was then acquired in a three-dimensional mode for 2.5 minutes in each bed position. The PET data obtained were reconstructed iteratively using an ordered-subset expectation maximization algorithm (128 × 128 matrix, 3.27 mm slice thickness, subset: 21, iterations: two). Acquisition and processing protocols of F-18 FDG PET/CT had not altered during the study duration. All F-18 FDG PET images were to be reported in compliance with the hospital′s own reporting form.
+ Open protocol
+ Expand
6

FDG-PET Imaging of Mediastinal Tumors

Check if the same lab product or an alternative is used in the 5 most similar protocols
Patients fasted for at least 6 h before FDG-PET examination. Intravenous 18F-FDG was administered at a dose of 5 MBq/kg. Sixty minutes after the injection, data was acquired using a Discovery STE PET/CT scanner (GE Healthcare) or a Biograph 16 PET/CT scanner (Siemens). Three-dimensional emission scanning was performed from the groin area to the top of the skull. The FDG uptake in the anterior mediastinal tumor was recorded.
+ Open protocol
+ Expand
7

FDG-PET/CT Imaging Standardized Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All patients in the study fasted for at least six hours before intravenous FDG administration. The dose range of intravenously injected FDG was 370–444 MBq, depending on patient weight. PET/CT images were acquired using a Biograph Duo PET/CT scanner (Siemens Healthcare) or a Biograph 16 PET/CT scanner (Siemens Healthcare). Prior to the PET scan, a CT scan (5 mm slice thickness) at an interval of 5 mm was acquired without contrast enhancement for attenuation correction.
+ Open protocol
+ Expand
8

FDG PET/CT Imaging Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The patients fasted for 6 h before the intravenous injection of 18F-FDG (5 MBq/kg). FDG PET/CT images were acquired 1 h after injection with the Discovery STE PET/CT scanner (GE Healthcare, Milwaukee WI) and Biograph 16 PET/CT scanner (Siemens, Malvem, PA). All PET images were independently interpreted by two experienced doctors of nuclear medicine. Functional images of the SUV were produced for a semiquantitative analysis. The SUV was defined as follows: SUV = radioactive concentration in the region of interest (MBq/g)/injected dose (MBq)/patient’s body weight (g). The SUVmax was defined as the peak SUV within the region of interest.
+ Open protocol
+ Expand
9

Pulmonary SERT Availability Assessment

Check if the same lab product or an alternative is used in the 5 most similar protocols
Pulmonary SERT availability was assessed after intravenous injection of SERT-selective [11C] 3-amino-4-(2-dimethylaminomethylphenylsulfanyl)-benzonitrile ([11C]DASB) with averaged 495 ± 6 MBq using an integrated PET/CT scanner (Biograph 16 PET/CT Scanner [Siemens Medical Solutions, Erlangen, Germany]). The dynamic acquisition was performed over 30 minutes (min) and comprised 30 measuring points (12 × 15 s [seconds], 2 × 30 s, 6 × 60 s, 10 × 120 s). A low-dose CT of the lung was performed in each subject for anatomic coregistration and attenuation correction. The radioactivity in blood was measured at 10, 15, 20, 25, and 30-min post injection (p.i.) in each participant using a Cobra gamma counter (Packard Instrument Company, Meriden, CT, USA) and decay was corrected to the start time of the PET/CT scan (Fig. 1(b, c)).
+ Open protocol
+ Expand
10

Measuring Brown Adipose Tissue Activity

Check if the same lab product or an alternative is used in the 5 most similar protocols
The cooling protocol used and the quantification of the BAT volume and activity were as previously reported [14, 16] (link). Briefly, subjects sat in a cool room (19.5-20 °C) wearing a water-perfused cooling vest (Polar Products Inc., Stow, OH, USA). The water temperature was reduced from 16.6 °C at ~2.2 °C per 10 min until they began shivering. After 48-72 h had elapsed, they went to the Hospital Virgen de las Nieves, where they were again placed in a cool room (19.5-20 °C) and wore the same cooling vest but with the water temperature set ~4 °C above their earlier shivering threshold test result for 2 h. After the first hour, the subjects received an injection of [ 18 F] FDG (1 85 MBq) and the water temperature was increased by 1 °C to avoid visually detectable shivering. One hour later, they were subjected to PET/CT using a Siemens Biograph 16 PET/CT scanner (Siemens, Erlangen, Germany), scanning two BEDs from the atlas vertebra to thoracic vertebra 6 (approximately).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!