The largest database of trusted experimental protocols

8 pro series monitor

Manufactured by Hobo
Sourced in Morocco

The HOBO 8 Pro Series monitor is a compact and versatile data logging device designed for environmental monitoring applications. It features multiple input channels to accommodate a variety of sensors, allowing for the collection and recording of data from various environmental parameters.

Automatically generated - may contain errors

2 protocols using 8 pro series monitor

1

Multimodal In-Vehicle Air Quality Monitoring

Check if the same lab product or an alternative is used in the 5 most similar protocols
We made the following measurements with inlets at the subject’s breathing zone inside the respirator face piece and near the center of the vehicle cabin: mass concentrations of PM with median cut-point of 2.5 μm (PM2.5) at 1-min intervals using TSI SidePak model AM510 aerosol monitors (TSI, Inc, Shoreview, MN) with the calibration factor set at 0.32 (based on collocated gravimetric analysis of local ambient); number concentrations of particles with aerodynamic diameter from 0.01 to 1.0 μm at 1-min intervals using a condensation particle counter, TSI model 3007 (TSI, Inc.). Measured in the vehicle cabin only: back carbon using an AE-51 microaethalometer (Aethlabs, San Francisco, CA) at flow rate of 100 ml/min and 1-min time base; nitrogen dioxide (NO2) collected on triethanolamine-coated Sep-Pak cartridges (Waters, Corp, Millford, MA), analyzed using HPLC-UV as previously reported [13 (link)]; carbon monoxide (CO) and air temperature were measured continuously with a Langan T15v monitor (Langan, Inc, San Francisco, CA); and humidity with a HOBO 8 Pro Series monitor (Onset, Bourne, MA).
+ Open protocol
+ Expand
2

Exposure Measurements in Respirator and Vehicle

Check if the same lab product or an alternative is used in the 5 most similar protocols
We made the following measurements with inlets at the subject’s breathing zone inside the respirator (PAPR) face piece and separately near the center of the vehicle cabin: mass concentrations of PM with median cut-point of 2.5 μm (PM2.5) at 1-min intervals using TSI SidePak model AM510 aerosol monitors (TSI, Inc, Shoreview, MN) with the calibration factor set at 0.32 (based on collocated gravimetric analysis of local ambient particles); number concentrations of particles with aerodynamic diameter from 0.01 to 1.0 μm at 1-min intervals using a condensation particle counter, TSI model 3007 (TSI, Inc.). Pollutants measured in the vehicle cabin only were: back carbon using an AE-51 microaethalometer (Aethlabs, San Francisco, CA) at flow rate of 100 ml/min and 1-min time base; nitrogen dioxide (NO2) collected on triethanolamine-coated Sep-Pak cartridges (Waters, Corp, Millford, MA), analyzed using HPLC-UV as previously reported [44 (link)]; carbon monoxide (CO) and air temperature were measured continuously with a Langan T15v monitor (Langan, Inc, San Francisco, CA); and humidity with a HOBO 8 Pro Series monitor (Onset, Bourne, MA)
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!