The largest database of trusted experimental protocols

Automated glycohemoglobin analyser hlc 723g8

Manufactured by Tosoh
Sourced in Japan

The Automated Glycohemoglobin Analyser (HLC-723G8) is a laboratory instrument manufactured by Tosoh. The core function of this device is to measure the concentration of glycated hemoglobin (HbA1c) in human blood samples.

Automatically generated - may contain errors

5 protocols using automated glycohemoglobin analyser hlc 723g8

1

Measurement of Lipid and Glucose Biomarkers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Fasting blood samples were obtained from each patient after 12-h fasting once upon admission. Blood samples were collected into EDTA-containing tube. After centrifugation at 3000 rpm for 10 min at 4 °C, plasma was collected and stored at − 80 °C. Plasma concentrations of total cholesterol (TC), TG, LDL-C and HDL-C were measured by automatic biochemistry analyzer (Hitachi 7150, Tokyo, Japan) in an enzymatic assay. Non-high density lipoprotein cholesterol (Non-HDL-C) was calculated as TC minus HDL-C. Plasma levels of sdLDL were measured by an automated homogeneous assay (DENKA SEIKEN CO., LTD, Tokyo, Japan) [19 (link)]. The measured sdLDL was with calibration range of 0.0–100 mg/dL. The concentrations of glucose were measured by enzymatic hexokinase method. HbA1c was measured using Tosoh Automated Glycohemoglobin Analyser (HLC-723G8, Tokyo, Japan).
+ Open protocol
+ Expand
2

Lipid and Glucose Profiling Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Laboratory data were obtained from each patient with their venous blood samples taken after 12 h overnight at the initial entry in hospital, and all samples were stored in a − 80 °C refrigerator until test. The lipid profiles were measured by automatic biochemistry analyzer (Hitachi 7150, Tokyo, Japan) followed the methods of our previous study [23 (link)]. Detailly, the low-density lipoprotein cholesterol (LDL-C) concentrations were measured by selective solublilization method (low-density lipid cholesterol test kit; Kyowa Medex, Tokyo). High-density lipoprotein cholesterol (HDL-C) concentrations were analyzed using a homogeneous method (Determiner L HDL; Kyowa Medex, Tokyo). Total cholesterol, Triglyceride, Apolipoprotein A1 (ApoA1), and ApoB were measured by automatic biochemistry analyzer (Hitachi 7150, Tokyo, Japan) in an enzymatic assay. The fast glucose concentrations were measured by enzymatic hexokinase method. HbA1c was measured using Tosoh Automated Glycohemoglobin Analyser (HLC-723G8, Tokyo, Japan).
+ Open protocol
+ Expand
3

Detailed Lipid and Lipoprotein Profiling

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples of all patients were collected from cubital vein after fasting for at least 12 h upon admission and stored at − 80 °C until analysis. Concentrations of total cholesterol (TC), TG, LDL-C, high density lipoprotein cholesterol (HDL-C) and apolipoprotein B (apoB) were directly measured using an automatic biochemistry analyzer (Hitachi 7150, Tokyo, Japan). The non-HDL-C value was calculated as TC minus HDL-C. The concentrations of glucose were measured by enzymatic hexokinase method, while HbA1c was measured using Tosoh Automated Glycohemoglobin Analyser (HLC-723G8, Tokyo, Japan). Lipoprotein (a) [Lp(a)] levels were assayed by an immunoturbidimetry method as previously described [22 (link)]. Directly measured RC (MRC) was obtained using a two-step automated assay developed by Denka Seiken (Tokyo, Japan), measuring the cholesterol content in CR, VLDL, and IDL specifically, with the aid of enzymes and surfactants. The cholesterol in other lipoproteins was removed in the first step, and then the cholesterol in the remaining remnant lipoprotein particles were determined (for further details see Additional file 1: Methods) [10 (link), 12 (link)]. Inter-assay coefficients of variation for the RC assays were 4.8%. Calculated RC (CRC) was defined as TC minus LDL-C minus HDL-C [7 (link)].
+ Open protocol
+ Expand
4

Fasting Plasma Lipid and Glucose Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were obtained after 12-h fasting once upon admission and were collected into EDTA-containing tubes. After centrifugation at 3000 rpm for 10 min at 4 °C, plasma was collected and stored at − 80 °C. Plasma concentrations of total cholesterol (TC), TG, LDL-C, high density lipoprotein cholesterol (HDL-C), apolipoprotein B (ApoB) were measured by automatic biochemistry analyzer (Hitachi 7150, Tokyo, Japan) in an enzymatic assay. Non-HDL-C was calculated as TC minus HDL-C. Plasma levels of LDL-TG were measured by an automated homogeneous assay (DENKA SEIKEN CO., LTD, Tokyo, Japan) [20 ]. The measured LDL-TG was with calibration range of 0.0–80 mg/dL. The automated homogeneous LDL-TG method used for our study was validated against the standard sequential density ultracentrifugation method [20 ]. The concentrations of glucose were measured by enzymatic hexokinase method. HbA1c was measured using Tosoh Automated Glycohemoglobin Analyser (HLC-723G8, Tokyo, Japan).
+ Open protocol
+ Expand
5

Comprehensive Blood Lipid Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were collected from each patient after fasting for at least 12-h. In consistent with our previous study, concentrations lipid parameters, including total cholesterol (TC), triglyceride (TG), low density lipoprotein cholesterol (LDL-C), high density lipoprotein cholesterol (HDL-C), and FFAs were measured using automatic biochemistry analyzer (Hitachi 7150, Tokyo, Japan) in an enzymatic assay. The concentrations of glucose were evaluated by enzymatic hexokinase method. HbA1c was measured using Tosoh Automated Glycohemoglobin Analyser (HLC-723G8, Tokyo, Japan).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!