Natural saponite (NSAP) was obtained from the source of clay repository, Clay Minerals Society and used without further modification. Aluminum isopropoxide was purchased from Sigma Aldrich (St. Louis, MO, USA). Quinine hydrochloride dihydrate (QU, C20H24N2O2 HCl 2H2O) obtained from Sigma Aldrich, USA. Sodium Silicate (Na2SiO2) Mg (CH3COO)2, NaOH, KH2PO4 and HCl were obtained from S.D. fine chemicals (Mumbai, India) and used as received. The cation exchange capacity of the natural Saponite and synthetic Saponite is 76 and 59.7 mequiv/100 g clay, respectively [36 (link),37 (link)].
Hydrochloric acid (hcl)
Manufactured by SD Fine Chemicals
Sourced in India
Hydrochloric acid is a clear, colorless liquid chemical compound. It is an aqueous solution of hydrogen chloride. Hydrochloric acid is commonly used in various industrial and laboratory applications.
Automatically generated - may contain errors
Lab products found in correlation
Sodium hydroxide (naoh), by SD Fine Chemicals (7 mentions)
Sodium chloride (nacl), by SD Fine Chemicals (2 mentions)
Acetone, by SD Fine Chemicals (2 mentions)
Methanol, by SD Fine Chemicals (2 mentions)
Isopropyl alcohol, by Merck Group (2 mentions)
2 2 diphenyl 1 picrylhydrazyl (dpph), by Merck Group (2 mentions)
Aluminum isopropoxide, by Merck Group (1 mentions)
Nano3, by SD Fine Chemicals (1 mentions)
H2so4, by SD Fine Chemicals (1 mentions)
Na2so4, by SD Fine Chemicals (1 mentions)
3 aminopropyltrimethoxysilane, by Merck Group (1 mentions)
Phosphoric acid, by SD Fine Chemicals (1 mentions)
Formaldehyde, by SD Fine Chemicals (1 mentions)
Hexane, by Thermo Fisher Scientific (1 mentions)
Cadmium acetate dihydrate, by Merck Group (1 mentions)
Copper chloride dihydrate, by Merck Group (1 mentions)
Myristic acid, by Merck Group (1 mentions)
Cadmium oxide, by Merck Group (1 mentions)
Selenium se, by Merck Group (1 mentions)
Trioctylphosphine top, by Merck Group (1 mentions)
19 protocols using hydrochloric acid (hcl)
1
Saponite-based Quinine Adsorbent Synthesis
2
Graphite-Reinforced PEEK Composite Synthesis
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Poly(ether ether ketone)
(PEEK) (medium melt viscosity grade 450 PF) was obtained from Victrex
PLC, England, and 3-aminopropyl trimethoxysilane (99%) was received
from Sigma-Aldrich Chemicals. Graphite (Gt) powder (size 100 μm),
dimethylacetamide (DMAc), phosphoric acid, formaldehyde, acetone,
methanol, H2SO4, NaOH, NaCl, NaNO3, KMnO4, H2O2, HCl, and Na2SO4 of analytical grade were obtained from SD Fine Chemicals,
India and used with proper purification. All experiments were performed
using ultrapure water (resistivity: 18.2 MΩ cm).
(PEEK) (medium melt viscosity grade 450 PF) was obtained from Victrex
PLC, England, and 3-aminopropyl trimethoxysilane (99%) was received
from Sigma-Aldrich Chemicals. Graphite (Gt) powder (size 100 μm),
dimethylacetamide (DMAc), phosphoric acid, formaldehyde, acetone,
methanol, H2SO4, NaOH, NaCl, NaNO3, KMnO4, H2O2, HCl, and Na2SO4 of analytical grade were obtained from SD Fine Chemicals,
India and used with proper purification. All experiments were performed
using ultrapure water (resistivity: 18.2 MΩ cm).
3
Synthesis of Nanocrystalline Materials
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Cadmium acetate dihydrate (Sigma-Aldrich,
98%), myristic acid (Sigma-Aldrich, 98%), selenium (Se, Sigma-Aldrich,
99.99%), tellurium (Te, SigmaAldrich, 99.99%), copper chloride dihydrate
(ACS reagent, 99.8%), zinc acetate trihydrate (Zn(CH3COO)2·2H2O, Sigma-Aldrich, 98%), sodium borohydride
(NaBH4, Sigma-Aldrich, 96%), trioctylphosphine (TOP, Sigma-Aldrich,
technical grade, 90%), 1-octadecene (ODE, Sigma-Aldrich, technical
grade, 90%), oleylamine (technical grade, 70%), sulfur (S, Sigma-Aldrich,
<99.5%), oleic acid (technical grade, Sigma-Aldrich, 90%), cadmium
oxide (Sigma-Aldrich, 99.9%), and lead oxide (Alfa Aesar, 99.9%).
Hexane (AR grade, 99%), 1,4-butanediol (90%, AR), dextrose (95% anhydrous,
AR), HCl (99%), and HNO3 (98%) were purchased from SD Fine
Chemicals. All chemicals were used without further purification.
98%), myristic acid (Sigma-Aldrich, 98%), selenium (Se, Sigma-Aldrich,
99.99%), tellurium (Te, SigmaAldrich, 99.99%), copper chloride dihydrate
(ACS reagent, 99.8%), zinc acetate trihydrate (Zn(CH3COO)2·2H2O, Sigma-Aldrich, 98%), sodium borohydride
(NaBH4, Sigma-Aldrich, 96%), trioctylphosphine (TOP, Sigma-Aldrich,
technical grade, 90%), 1-octadecene (ODE, Sigma-Aldrich, technical
grade, 90%), oleylamine (technical grade, 70%), sulfur (S, Sigma-Aldrich,
<99.5%), oleic acid (technical grade, Sigma-Aldrich, 90%), cadmium
oxide (Sigma-Aldrich, 99.9%), and lead oxide (Alfa Aesar, 99.9%).
Hexane (AR grade, 99%), 1,4-butanediol (90%, AR), dextrose (95% anhydrous,
AR), HCl (99%), and HNO3 (98%) were purchased from SD Fine
Chemicals. All chemicals were used without further purification.
4
Rutin Hydrate Formulation and Characterization
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Rutin Hydrate (RUT) was procured from Sigma-Aldrich, (Burlington, MA, USA), a product of China. Phospholipid 90G was procured from Lipoid, Ludwigshafen, Germany. Sisco Research Laboratories PVT LTD, Mumbai, India provided the cholesterol, DPPH, and rhodamine-B. Other chemicals like glycerol, HPLC Water, disodium hydrogen phosphate, potassium dihydrogen phosphate and HCL were purchased from SD Fine Chemicals, (Mumbai, India). Carbopol® 934P NF (Carbopol 934P NF is used as Extended-release agent, Suspension and emulsion stabilizer and Bio adhesive agent) was received as a gift sample from Lubrizol Advanced Materials Inc., (Wickliffe, OH, USA). All the other solvents such as methanol, chloroform, ethanol, and octanol used were of laboratory grade, procured from Merck (Mumbai, India).
5
Fabrication of Vanadium-based Anode Materials
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Elemental powders of vanadium (325 mesh, 99.5%) and aluminum nitride
(AlN; 10 μm, ≥ 98%), lithium fluoride (LiF, trace metals
basis ≥99.99%), isopropyl alcohol (IPA), and DMSO (≥
99.9%) were purchased from Sigma-Aldrich, India. HCl was purchased
from S D Fine-Chem Limited, India. Manganese(II) acetate tetrahydrate
(99.99%) N-methyl pyrrolidone (NMP, 99.5%) and sodium
sulfate (Na2SO4, ≥99%) were supplied
by Sigma-Aldrich, USA. Super P carbon black and poly(vinylidene fluoride)
(PVDF) were supplied by Alfa Aesar, USA.
(AlN; 10 μm, ≥ 98%), lithium fluoride (LiF, trace metals
basis ≥99.99%), isopropyl alcohol (IPA), and DMSO (≥
99.9%) were purchased from Sigma-Aldrich, India. HCl was purchased
from S D Fine-Chem Limited, India. Manganese(II) acetate tetrahydrate
(99.99%) N-methyl pyrrolidone (NMP, 99.5%) and sodium
sulfate (Na2SO4, ≥99%) were supplied
by Sigma-Aldrich, USA. Super P carbon black and poly(vinylidene fluoride)
(PVDF) were supplied by Alfa Aesar, USA.
6
Optimization of Cellulose Acetate Membrane Fabrication
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
ALPHA Chemie of India provided the CA (acetyl content: 29–46%, Mn: 50,000). n-Hexane (95% pure) was obtained from M-TEDIA. Activated Carbon (AC) was obtained from Fisher. Polyethylene glycol (PEG) was obtained from ACROS Organic (Mw = 200). Central Drug House provided acetone of HPLC grade (assay 99.8%). Merck provided N,N-dimethylacetamide (DMAA). CH3CH2OH was obtained from Inter. Co. for sup & MED, Industries, Egypt. Disodium salt dehydrate of Ethylenediaminetetraacetic acid was obtained from Sigma-Aldrich. Pyridine was obtained from Loba Chemie, and NaOH (Min. Assy 96%) was obtained from ADWIC, El Nasr Pharm. Chem. Co., Egypt). HCl (Assay 30–34%) was obtained from SD Fine-Chem Limited (SD FCL), Mumbai, India, and MB dye (basic blue 9; C.I.52015, C16H18N3ClS.xH2O, Mw = 319.85 g) was obtained from Honeywell Riedel-de Haën AG, SEELZE-HANNOVER, Germany. CH2Cl2 (HPLC grade) was obtained from Fisher chemicals, and all the reagents were used as received without further purification.
7
Luteolin and Eudragit RS100 Nanoparticles for H. pylori
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Luteolin and Eudragit RS100 were procured from Beijing Mesochem Technology. Beijing, China and UFC Biotechnology, Amherst, NY, USA. Ethyl cellulose, tween-80, acetone and hydrochloric acid were purchased from SD Fine Chemicals Pvt. Ltd. Mumbai, India. A reference strain (H. pylori ATCC43504) from the American Type Culture Collection (Manassas, VA, USA) was used in the study. Brain heart infusion broth/agar media and bovine serum albumin were obtained from Sigma (St. Louis, MO, USA). Wistar albino rats were used for the in vivo study. All other chemicals used were of analytical research grade.
8
Nicotinic Acid Lipase Assay Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Nicotinic acid (NA), triacylglycerin lipase, ethylene Glycol (EG) (Himedia Lab. Pvt. Ltd., India), polyethyleneglycol (PEG400) (Merck, Schuchardt, Germany), insulin human mixtard (Torrent Pharmaceuticals Ltd., India), sodium hydroxide, hydrochloric acid, di-sodium hydrogen orthophosphate anhydrous (Na2HPO4), sodium dihydrogen orthophosphate dehydrate (NaH2PO4.2H2O) (S.D Fine-Chemicals Ltd.), all of the analytical grade, were used as received.
9
Synthesis of Polymer-Based Drug Delivery System
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
S. potatorumL. seeds were purchased
from Sirigiri Venkappa
Ayurveda store, Nandyala, Andhra Pradesh, India. Dimethylaminoethyl
methacrylate (DMAEMA), acrylamide, N,N-methylene bisacrylamide (MBA), and ammonium persulphate (APS) were
purchased from Sigma-Aldrich Chemical Co. 5-Fluorouracil, silver nitrate,
sodium hydroxide, and hydrochloric acid were purchased from SD Fine
Chemicals, Mumbai, India. Doxorubicin hydrochloride (DOX) was received
from LC laboratories. All of the chemicals were used as received,
and double-distilled water (DDW) was used for all experiments.
from Sirigiri Venkappa
Ayurveda store, Nandyala, Andhra Pradesh, India. Dimethylaminoethyl
methacrylate (DMAEMA), acrylamide, N,N-methylene bisacrylamide (MBA), and ammonium persulphate (APS) were
purchased from Sigma-Aldrich Chemical Co. 5-Fluorouracil, silver nitrate,
sodium hydroxide, and hydrochloric acid were purchased from SD Fine
Chemicals, Mumbai, India. Doxorubicin hydrochloride (DOX) was received
from LC laboratories. All of the chemicals were used as received,
and double-distilled water (DDW) was used for all experiments.
10
HPLC Analysis of Elbasvir and Grazoprevir
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Reference standard samples of elbasvir and grazoprevir were procured from Clearsynth Laboratories Ltd, India. The commercial formulation "Zepatier" Tablets (50 mg elbasvir + 100 mg Grazoprevir, Merck & Co. Inc.) was bought from the pharmacy store. Solvents like HPLC grade water and acetonitrile were bought from Merck, India. Formic acid was purchased from Sigma-Aldrich. Hydrochloric acid, hydrogen peroxide and sodium hydroxide were procured from S.D. Fine Chemicals, Hyderabad.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!