Cellulose nanofibers

Manufactured by Merck Group

Sourced in India

Cellulose nanofibers are a type of laboratory equipment used for various applications. They are derived from cellulose, a natural and renewable polymer found in plant cell walls. Cellulose nanofibers have a high aspect ratio, small diameter, and high surface area, making them suitable for a range of research and industrial applications.

Automatically generated - may contain errors

Lab products found in correlation

3 protocols using cellulose nanofibers

Synthesis and Characterization of Magnetic Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols

Cellulose nanofibers were purchased from Sigma Aldrich. Iron(iii) chloride, iron(ii) sulfate, cobalt(ii) acetate, and sodium hydroxide were purchased from Sigma Aldrich. All chemicals were used without further purification. The FT-IR spectra were recorded on a JASCO FT/IR 4600 FT-IR spectrometer. The thermal analysis (TGA) was carried out using a TGA Q600 TA instrument at a heating rate of 10 °C min⁻¹ in air. The powder X-ray diffraction (XRD) was performed with a Philips PW1730. The scanning electron microscopy (FESEM) and the energy dispersive X-ray spectroscopy (EDS) characterization of catalysts was performed using an electron microscope Tescan MIRA3. The melting points of the products were measured by an electrothermal 9100 apparatus. ICP experiments were accomplished using a Varian Vista Pro CCD simultaneous ICP-OES instrument. Magnetic properties of the nanoparticles were measured with a vibrating sample magnetometer (VSM). Transmission electron microscopy (TEM) was performed on a Philips EM208 microscope and was operated at 100 kV.

Kargar P.G., Bagherzade G, & Eshghi H. (2020). Novel biocompatible core/shell Fe3O4@NFC@Co(ii) as a new catalyst in a multicomponent reaction: an efficient and sustainable methodology and novel reusable material for one-pot synthesis of 4H-pyran and pyranopyrazole in aqueous media. RSC Advances, 10(61), 37086-37097.

+ Open protocol

+ Expand

Fabrication of Antioxidant Biopolymer Composites

Check if the same lab product or an alternative is used in the 5 most similar protocols

Original ethanol lignin was obtained from our previous work [31 (link)]. Anhydrous ethanol (EtOH), Analytical grade purity polyvinyl alcohol (PVA), chitosan (CH, μ = 1000 cP, degree of deacetylation > 75%) cationic etherified starch (CES, μ = 460–1200 mPa·s, Whiteness ≥ 88%), Sodium alginate (SAL), cellulose nanofibers (CNF, C_-COOH = 2.4 mol/g, W = 1.22 wt.%) 2,2-Diphenyl-1-picrylhydrazyl (DPPH) were purchased from Sigma–Aldrich^®. Analytical grade purity syringaldehyde (SA) was obtained from commercial sources.

Zeng S., Zhang S., Liu X., Zhao H., Guo D., Tong X, & Li J. (2022). Green and Efficient Preparation of Tailed Lignin Nanoparticles and UV Shielding Composite Films. Nanomaterials, 12(15), 2561.

+ Open protocol

+ Expand

Cellulose Nanofiber Production and Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols

Ammonium persulfate (≥ 98 % purity), Aniline (≥ 99.5 % purity), and Hydrochloric acid (35 %) were procured from Sigma Aldrich, India. Cellulose Nanofibers with an average diameter of 20-30 nm was obtained from eucalyptus bleached Kraft pulp and was supplied by SUZANO, Brazil. CNF was produced by mechanical grinding of the Bleached Eucalyptus Kraft pulp (BEKP) with almost 85-90 % cellulose, 10-15 % hemicellulose & 0 % Lignin content (Kappa Number < 1). The Zeta Potential of CNF suspension was around -36.1 mV and ∼0.048 mM/g of COOH.

Pai A.R., Binumol T., Gopakumar D.A., Pasquini D., Seantier B., Kalarikkal N, & Thomas S. (2020). Ultra-fast heat dissipating aerogels derived from polyaniline anchored cellulose nanofibers as sustainable microwave absorbers. Carbohydrate polymers, 246.

+ Open protocol

+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Revolutionizing how scientists
search and build protocols!