Log In Sign up
The largest database of trusted experimental protocols

K3 fe cn 6

Manufactured by Fujifilm
Visit Supplier
Sourced in Japan

K3[Fe(CN)6], also known as potassium ferricyanide, is a chemical compound used in various laboratory applications. It serves as an oxidizing agent and can be employed in analytical chemistry and other scientific procedures.

Automatically generated - may contain errors

Lab products found in correlation

Mnso4 h2o, by Fujifilm (2 mentions) Agarose for electrophoresis, by Kanto Chemical (2 mentions) Fecl2 4h2o, by Fujifilm (1 mentions) Acetic acid 1.00 m, by Fujifilm (1 mentions) Gdmcl, by Tokyo Chemical Industry (1 mentions) K4 fe cn 6, by Fujifilm (1 mentions) Trisodium citrate dihydrate, by Fujifilm (1 mentions) Kmno4, by Fujifilm (1 mentions)

5 protocols using k3 fe cn 6

1

Synthesis and Characterization of Prussian Blue

Check if the same lab product or an alternative is used in the 5 most similar protocols
Analytical reagent grade MnSO4·H2O, FeCl2·4H2O, and K3[Fe(CN)6] were obtained from Wako Pure Chemical Industries (Osaka, Japan). Agarose for electrophoresis (gel strength: 1800–2300 g cm−3) was purchased from Kanto Chemical (Tokyo, Japan). Acetic acid (1.00 M) and sodium metasilicate (Na2SiO3) aqueous solution (water-glass, 52–57% assay, 2.06–2.31 SiO2/Na2O mole ratio) were also acquired from Wako Pure Chemical Industries. All chemicals were used without further purification. All aqueous solutions were prepared using deionized water, which was purified from tap water by a cartridge water purifier (G-10, Organo, Tokyo, Japan).
Hayashi H., Aoki S, & Suzuki T. (2019). Spontaneous precipitation pattern formation by crystallites of Mn–Fe-based Prussian blue analogues in agarose gel. RSC Advances, 9(62), 36240-36247.
+ Open protocol
+ Expand
2

Quantifying Ferricyanide Compound Reactions

Check if the same lab product or an alternative is used in the 5 most similar protocols
The chemical reagents K3[Fe(CN)6], K4[Fe(CN)6], and agar powder were purchased from Fujifilm Wako Pure Chemical Corporation. GdmCl was purchased from Tokyo Chemical industry Co., Ltd. All solutions were prepared using deionized water.
Jiang L., Horike S., Mukaida M., Kirihara K., Seki K, & Wei Q. (2023). High‐Performance Isotropic Thermo‐Electrochemical Cells Using Agar‐Gelled Ferricyanide/Ferrocyanide/Guanidinium. Global Challenges, 7(6), 2200207.
+ Open protocol
+ Expand
3

Manganese-Assisted Bone Gelatin Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
The reagents used (MnCl2·4H2O, K3[Fe(CN)6], and trisodium citrate dihydrate) were of analytical grade and purchased from Wako Pure Chemicals, Osaka, Japan. A deionized bovine bone gelatin was provided by Nitta Gelatin, Osaka, Japan. These chemicals were used as-received without further purification.
Shiba F., Yamamoto A., Shinta Y., Mameuda U., Tahara Y, & Okawa Y. (2021). Formation mechanisms of hollow manganese hexacyanoferrate particles and construction of a multiple-shell structure. RSC Advances, 11(15), 8767-8774.
+ Open protocol
+ Expand
4

Synthesis of Prussian Blue Analogues

Check if the same lab product or an alternative is used in the 5 most similar protocols
Analytical reagent grade MnSO 4 ÁH 2 O, FeCl 2 Á4H 2 O, CsCl, and K 3 [Fe(CN) 6 ] were obtained from Wako Pure Chemical Industries (Osaka, Japan). Agarose (gel strength: 1800-2300 g cm À3 ) was procured from Kanto Chemical (Tokyo, Japan). All chemicals were used as received without further purification. Aqueous solutions were prepared using deionized water obtained after purification of tap water using a cartridge water purifier (G-10, Organo, Tokyo, Japan).
Hayashi H. (2022). Cs sorption of Mn-Fe based Prussian blue analogs with periodic precipitation banding in agarose gel. Physical chemistry chemical physics : PCCP, 24(16).
+ Open protocol
+ Expand
5

Analytical Reagent Powder Preparation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Analytical reagent-grade powders of Mn, MnO, MnSO4•H2O, KMnO4, and K3[Fe(CN)6] were obtained from Wako Pure Chemical Industries (Osaka, Japan). Agarose for electrophoresis (gel strength: 1800 -2300 g/cm 3 ) was purchased from Kanto Chemical (Tokyo, Japan). All chemicals were used without further purification. All aqueous solutions were prepared using deionized water, which was purified from tap water by a cartridge water purifier (G-10, Organo, Tokyo, Japan).
Hayashi H, & Takaishi M. (2020). Highly Resolved Mn Kβ Emission: A Potential Probe in Laboratory for Analysis of Ligand Coordination around Mn Atoms in Gels and Solutions. Analytical sciences : the international journal of the Japan Society for Analytical Chemistry, 36(10).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!