The surface morphology/shape of pure APG, pure PL and various SDs prepared by different techniques were studied using “Scanning Electron Microscopy (SEM)”. The samples from each material were fixed on the stubs with the help of “Adhesive Carbon Tape (SPI Supplies, West Chester, PA, USA)” and coated with gold under vacuum in a “Q150R Sputter Coater Unit (Quorum Technologies Ltd., East Sussex, UK)” in an argon atmosphere at 20 mA for about 60 sec. The photomicrographs of each sample were recorded with the help of “SEM Microscope (Zeiss EVO LS10; Cambridge, UK)” (Alshehri et al., 2017a (link)).
Adhesive carbon tape
Manufactured by SPI Supplies
Sourced in United States
Adhesive carbon tape is a laboratory product used to securely mount or affix samples onto surfaces for analysis. It provides a sticky, conductive surface to hold samples in place during various testing or imaging procedures.
Automatically generated - may contain errors
Lab products found in correlation
4 protocols using adhesive carbon tape
1
Scanning Electron Microscopy of Pharmaceutical Materials
2
Liposome Surface Morphology by SEM
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
The surface morphology of liposomes was studied using a scanning electron microscope (SEM; EVO LS10; Zeiss, Cambridge, UK). Samples were mounted on stubs using adhesive carbon tape (SPI Supplies, West Chester, USA) on both sides, which was coated with gold under vacuum in a Q150R sputter coater unit, procured from Quorum Technologies Ltd. (East Sussex, UK) in an argon atmosphere at 20 mA for 120 s. After coating the liposomes, they were viewed and photographed to study the surface structure.
3
Scanning Electron Microscopy of Enamel Etching
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
To assess the enamel etching pattern (Silverstone et al. 1975 (link)) produced by SE agents, six etched samples (without bonded sealant block) were evaluated. Immediately after conditioning. The samples were washed with acetone to dissolve the coating agent and then were dried at room temperature. The samples were fixed to aluminium stubs with adhesive carbon tape (SPI Supplies, USA). The analysis was performed using a scanning electron microscope (JEOL, JSM-6510LV, Japan) in the low vacuum at 10 Pa of chamber pressure, with an electron acceleration voltage of 25 kV and detecting backscattered electrons. Enamel surface morphology and etching patterns were observed at × 500, × 1000, and × 2000 magnification.
4
SEM Analysis of Venlafaxine HCl Formulation
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Surface morphology of venlafaxine HCl optimized FDOF formula was investigated by using scanning electron microscopy (SEM). The film sample was attached on the stubs by adhesive carbon tape (SPI Supplies, West Chester, PA, USA), and then sputter-coated with a thin gold palladium layer under an argon atmosphere using a gold sputter module in a high-vacuum evaporator. Coated samples were then scanned and photomicrographs were taken with an SEM (Zeiss EVO LS10; Cambridge, UK).
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!