The largest database of trusted experimental protocols

Emr 500

Manufactured by Labomed
Sourced in United States

The EMR-500 is a high-performance electromagnetic radiation measurement device. It is designed to accurately measure and analyze various forms of electromagnetic radiation, including but not limited to radio frequency (RF), microwave, and other non-ionizing radiation. The device provides precise measurements and data collection for research, testing, and monitoring applications.

Automatically generated - may contain errors

10 protocols using emr 500

1

Vitamin D Replacement and Glycemic Control

Check if the same lab product or an alternative is used in the 5 most similar protocols
Vitamin D assays were performed using commercially available sandwich ELISA kit, supplied by Chongqing Biospes Co., Ltd (Chongqing, People’s Republic of China) with the catalog number: BYEK1472 using microplate ELISA reader (EMR−500, Labomed, Inc., LA, USA). Vitamin D deficiency was defined as a 25-OHD level of ≤20 ng/ml and vitamin D insufficiency as 21–29 ng/ml and optimal level as ≥30 ng/ml.29 (link)–32 (link)
HbA1c assays were done using cobas c311, Hitachi, Roche Diagnostics, Germany. The patients were considered as poor glycemic control when their HbA1c ˃8%, while those having their HbA1c≤8% were categorized as having good glycemic control.9
Three months later, HbA1C and Vitamin D assays were repeated for vitamin D deficient patients who received vitamin D replacement therapy in addition to the routine insulin therapy.
+ Open protocol
+ Expand
2

Hormonal and Metabolic Biomarkers Evaluation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Reproductive hormones, including testosterone, follicle-stimulating hormone (FSH), and luteinizing hormone (LH), thyroid hormones such as T3, T4, and TSH, insulin, and cortisol hormones, were determined using the Intact Immunoassay, a two-site ELISA [Enzyme-Linked Immunosorbent Assay] (ELISA, Labomed, Inc., Los Angeles, USA) reader (EMR-500, Labomed, Inc., Los Angeles, USA) using commercially available ELISA kits (supplied by Chongqing Biospes Co., Ltd., China).
Serum glutamic oxaloacetic transaminase (GOT), serum glutamic pyruvic transaminase (GPT), alkaline phosphatase (ALP) activities, urea, creatinine, uric acid, total triglyceride (mg/dl), cholesterol (mg/dl), and lipase were measured by the colorimetric method using kits from Biodiagnostic commercial kits according to the manufacturer’s instructions.
Alpha-fetoprotein (AFP) was detected by the Human αFP (Alpha-Fetoprotein) ELISA Kit (Cat. No.: E-EL-H0070) using commercially available ELISA kits (supplied by Elabscience®). Adenosine deaminase (ADA) was detected by the colorimetric method using the ADA Assay Kit, Catalogue No. abx090675, supplied by Abbexa.
+ Open protocol
+ Expand
3

Quantifying Microbial Biofilm Production

Check if the same lab product or an alternative is used in the 5 most similar protocols
Using the microtitre plate (MTP) technique, the biofilm production of the six chosen strains was quantified [63 (link)]. Trypticase soy broth (TSB) containing 1% glucose was used to inoculate all of the investigated organisms that were isolated from fresh agar plates. For 24 h, broths were incubated at 37 °C. Then, fresh medium was added to the cultures at a 1:10 dilution. Two hundred microliters of the diluted cultures were added to each well of sterile 96-well microtitre plates. The negative control wells were filled with sterile broth. The plates were incubated for 24 h at 37 °C. Following incubation, each well's contents were taken out by light tapping. The wells were washed four times with 0.2 ml of phosphate buffered saline (pH 7.2). This eliminated bacteria that were floating around. Bacterial biofilm adhered to the wells was preserved with (2%) sodium acetate and stained with 0.1% crystal violet. Glacial acetic acid (33%) was used to remove extra discoloration, and the plates were kept to dry. At a wavelength of 570 nm, a micro ELISA autoreader (model EMR500, Labomed, USA) was used to measure the optical density of a stained adherent biofilm. The experiment was carried out in triplicate, and biofilm production was interpreted [64 (link)].
+ Open protocol
+ Expand
4

Caspase-3 Activation Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The reaction mixture contains 2 mM Ac-DEVD-pNA (Beyotime Biotechnology, Shanghai, China) and was incubated at 37°C for 6 h. Caspase-3 activation was measured on a microplate reader (EMR500; Labomed, Inc., Los Angeles, CA, USA) at 405 nm [20 (link)].
+ Open protocol
+ Expand
5

Biomarkers in Post-Seizure Venous Blood

Check if the same lab product or an alternative is used in the 5 most similar protocols
Each participant had a total of 3 mL of peripheral blood venous samples collected (within 8 h after the epileptic seizure [22 ]) and evacuated into serum separator gel tubes, where the samples were clotted for 30 min at 37 °C before centrifugation for 15 min at 3,500 rpm. The separated sera were kept at − 80 °C until biochemical analysis in the form of:

Serum neurotrophin-3 and growth-associated protein-43 assays were measured by microplate ELISA reader (EMR-500, Labomed, Inc. Los Angeles, USA), using commercially available ELISA assay kits supplied by Chongqing Biospes Co., Ltd., and SinoGeneClon Biotech Co., Ltd., respectively, China. Catalog No. BZEK1442-48 and SG-15851 respectively, according to the manufacturer protocol [22 ].

Serum TAC and zinc were measured by spectrophotometer (Chem-7, Erba Diagnostics Mannheim GmbH, Germany), using commercially available colorimetric assay kits supplied by Biodiagnostics, and Spectrum Diagnostics respectively, Cairo, Egypt. Catalog No. TA 25 13, and 330,001 respectively [22 ].

+ Open protocol
+ Expand
6

MTT Assay for Cell Viability

Check if the same lab product or an alternative is used in the 5 most similar protocols
The yellow solution of 3-[4,5-dimethylthiazol-2-yl] 2,5-diphenyltetrazolium bromide (MTT) (15 µL) was added to phosphate buffered saline (5 mg/mL) in each well. The plates were incubated at 37 °C for 4 h for the reduction of MTT. The resulting purple formazan crystals were solubilized in 100 µL of DMSO and the absorbance was measured at 570 nm using a micro plate reader (EMR500-Labomed). The cell inhibition (%) was calculated using the formula: Cell inhibition(%)=100-AbssampleAbscontrol×100.
A non-linear regression graph was plotted between cell inhibition (%) and log10 concentration and the 50 % minimum inhibitory concentration (IC50) was determined using Graph Pad Prism software.
+ Open protocol
+ Expand
7

Seroprevalence of Toxoplasma gondii in Psychiatric Patients

Check if the same lab product or an alternative is used in the 5 most similar protocols
This cross-sectional study was performed on psychiatric patients referred to Psychiatry outpatient clinic of Healthcare Application and Research Hospital. All patients who were referred to the psychiatry center and would like to contribute in our study were questioned about demographic characteristics, abortion, the habit of feeding cats and consumption of raw or undercooked meat. All patients and healthy individuals who gave written consent were recruited in this study using the convenience sampling method.
The study included the samples from 175 psychiatric patients (65 patients with schizophrenia, 46 Depression and 64 Bipolar Affective Disorder (BAD)) aged from 18-80 years old and samples from 100 the same age range healthy individuals as a control group. A blood sample of 2-3 ml was taken from patients aged. The blood sample was centrifuged at 1500 rpm for 10 mins for separation of the serum. The serum samples were stored at -20°C until assay. The Toxo-IgG and Toxo-IgM antibodies were investigated in the test serums with the enzyme-linked immunosor-bent assay (ELISA) using Dia Pro (Milan, Italy) commercial kits with 100% sensitivity and 100% specificity. The ELISA was performed and evaluated according to the Dia Pro (Milan, Italy) kits procedure. Absorbance plate wells were read at a wavelength of 450 nm with a plate reader (Labomed EMR-500, USA).
+ Open protocol
+ Expand
8

Toxo IgM Antibody ELISA Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
The serums stored at -20 °C and the kits stored at 2°-8 °C were taken to room temperature. The patient samples were diluted at the rate of 1:101 with 1000 μl sample diluent+10 μl sample and 100 μl was pipetted into wells from the controls and calibrators and 100 μl was added from the diluent. The samples were kept at 37 °C for 60 min then washed 5 times with 60 ml Washbuf 1200 ml distilled water. Diluent of 1.9 μl was added to Toxo IgM Ag and antigen antibody complex was formed by adding 100 μl from the conjugate to each of the Toxo Ag. From the prepared antigen-antibody complexes, 100 μl was added to each of the wells and they were kept at 37 °C for 60 min, then washed 5 times with 60 ml Washbuf 1200 ml distilled water. 100 μl chromogen substrate was added to all the wells and incubated in the dark at room temperature for 20 min. Absorbance plate wells were read at a wavelength of 450 nm with a plate reader (Labomed EMR-500, USA).
+ Open protocol
+ Expand
9

Quantitative ELISA Assay Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The serums stored at -20 °C and the kits stored at 2°-8 °C were taken to room temperature. The patient samples were diluted at the rate of 1:101 with 1000 μl sample diluent+10 μl sample and 100 μl was pipetted into wells from positive and negative controls and calibrators (1-6). The wells were marked and covered, then incubated at 37 °C for 60 min. They were then washed 5 times in the washing device and 100 μl enzyme conjugate was added to the wells and incubated again at 37 °C for 60 min. They were then washed 5 times in the washing device and 100 μl chromogen substrate was added to the wells and incubated in the dark at room temperature (18°-24 °C) for 20 min. Stop solution of 100 μl was added to all the wells and the samples were then examined with the ELISA reader (Labomed EMR-500, USA) at 450 nm wavelength.
+ Open protocol
+ Expand
10

Acetylcholinesterase Inhibitory Activity Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
The acetylcholinesterase inhibitory assay was performed in triplicate in 96-well microplates, and the absorbance was recorded using an ELISA microplate reader (EMR-500, LABOMED INC., CA, USA). The AChE inhibitory assay was performed by the colorimetric method reported by Ellman, with slight modifications [18] . ACTI was used as the substrate to examine the inhibitory effect of the samples on the AChE activities. The reaction mixture, containing 140 µL Tris-HCl buffer (pH 8.0), 20 µL of the tested sample solution, and 20 µL of the AChE solution (0.25 units/mL), was incubated at room temperature for 15 min, and the reaction was The AChE inhibitory activity of each compound was expressed as the concentration (µg/ml) required to inhibit the hydrolysis of the substrate by 50% (IC50 value). A range of concentrations of the tested compounds was used, so the IC50 value could be calculated from the logarithmic dose-inhibition curve.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!