The largest database of trusted experimental protocols

Xevo tqd triple quadrupole tandem mass spectrometer

Manufactured by Waters Corporation
Sourced in United States

The XEVO TQD is a triple quadrupole tandem mass spectrometer manufactured by Waters Corporation. It is a high-performance analytical instrument used for the detection and quantification of a wide range of compounds in complex matrices. The XEVO TQD employs the use of two quadrupole mass analyzers in tandem, allowing for precise and selective analysis of target analytes.

Automatically generated - may contain errors

2 protocols using xevo tqd triple quadrupole tandem mass spectrometer

1

UPLC-MS/MS Quantification of Agomelatine

Check if the same lab product or an alternative is used in the 5 most similar protocols
The concentrations of agomelatine were quantified using a Waters ACQUITY UPLC system (Waters Corp., Milford, MA, USA) coupled to a XEVO TQD triple quadrupole tandem mass spectrometer (Waters Corp.) with an electrospray ionization (ESI+) interface. Chromatographic separations were performed on an ACQUITY BEH C18 column (2.1×50 mm, 1.7 µm) with a C18 inline 0.2 mm stainless steel frit filter (Waters Corp.). The mobile phases consisted of water containing 0.1% FA and acetonitrile with isocratic elution in the ratio of 45:55. The flow rate was 0.3 mL/min with the injection volume of 2 µL. Mass spectrometric detection for quantitation by multiple reaction monitoring was performed on a XEVO TQD triple quadrupole mass spectrometer in the positive mode. The transitions were m/z 244.1 → 185.2, m/z 230.1 → 171.0, and m/z 237.1 → 194.2 for agomelatine, 7-desmethyl-agomelatine, and carbamazepine, respectively.
+ Open protocol
+ Expand
2

Polar Compound Analysis in Cell Extracts

Check if the same lab product or an alternative is used in the 5 most similar protocols
The samples were analyzed following the protocol published by Virgiliou and co-workers [37 (link)], which allowed su to identify 100 different polar compounds. The Acquity H-Class UPLC system (Waters, Milford, MA, USA) was used to analyze polar compounds in cell extracts. The chromatograph was equipped with a YMC-Triart C18 (100 × 2.0 mm, 1.9 µm) column (YMC, Kyoto, Japan). Mass spectrometry (MS) data were obtained in negative mode in the 50 m/z to 250 m/z range with a Xevo TQD triple quadrupole tandem mass spectrometer (Waters, Milford, MA, USA) coupled with an electrospray ionization (ESI) ion source. The column was set at 40 °C. Elution was applied with a mobile phase of 0.1% formic acid water solution (solvent A) and acetonitrile (solvent B). Flow rate was set to 0.4 mL/min. The starting conditions were set to 95% of solvent A. Gradient elution was applied with the following proportions of solvent A: 0 to 0.2 min was set to 95%, 0.2 to 1.5 min was set to 10%, 1.5 min to 1.8 min was maintained at 90%, and 1.8 to 2 min was set back to the starting conditions. The settings for the mass spectrometer were as follows: capillary voltage was set to negative 2 kV, source temperature to 150 °C, desolvation gas (nitrogen) temperature to 400 °C, gas flow to 700 L/h and cone gas flow to −20 L/h. Cone voltage was set to 25 V.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!