The largest database of trusted experimental protocols

Inveon combined micro pet ct scanner

Manufactured by Siemens
Sourced in United States

The Inveon combined micro-PET/CT scanner is a preclinical imaging system designed for small animal research. It combines positron emission tomography (PET) and computed tomography (CT) technologies to provide high-resolution, multimodal imaging capabilities. The system enables the simultaneous acquisition of functional and anatomical data from small laboratory animals.

Automatically generated - may contain errors

3 protocols using inveon combined micro pet ct scanner

1

Quantitative PET/CT Imaging of Tumor 18F-FDG Uptake

Check if the same lab product or an alternative is used in the 5 most similar protocols
18F-FDG was synthesized by the PET/CT center in our institution. Following an overnight fast, mice were injected with ~0.1 mCi 18F-FDG via the tail vein. After 1 h, mice were anesthetized with 3% isoflurane inhalation and placed in the prone position in the center of a Siemens Inveon combined micro-PET/CT scanner (Siemens Preclinical Solution USA, Inc., Knoxville, TN, USA). Micro-CT scans were performed with a 80 kV X-ray tube voltage, 500 µA current, 150 ms ec exposure time and 120 rotation steps. Micro-PET static acquisition was subsequently performed for 10 min and the data were processed using the ordered set expectation maximization algorithm for three dimensional PET reconstruction. Micro-PET/CT images were analyzed with an Inveon Research Workplace 4.1 (Siemens, Erlangen, Germany). The maximum standardized uptake value (SUVmax; g/ml) of the xenograft was measured on day 0, 14 and 28 and referred to as SUVmax0, SUVmax14, SUVmax28, respectively. The 18F-FDG uptake attenuation rate (FUAR) of the xenograft on day 14 and 28 was defined as FUAR14 and FUAR28, respectively, using the following equation: FUAR=(mean SUVmaxc value-mean SUVmaxt value)/mean SUVmaxc value ×100%, where SUVmaxc was the control group SUVmax, and the SUVmaxt was the treatment group SUVmax.
+ Open protocol
+ Expand
2

In Vivo PET/CT Imaging of Xenograft

Check if the same lab product or an alternative is used in the 5 most similar protocols
18F-FDG was synthesized by the PET/CT Center in our institution. Following an overnight fast, mice were injected with ~0.1 mCi 18F-FDG via the tail vein. After 1 h, mice were anesthetized with 3% isoflurane inhalation and placed in the prone position in the center of a Siemens Inveon combined micro-PET/CT scanner (Siemens Preclinical Solution USA, Inc., Knoxville, TN, USA). Micro-CT scans were performed with an 80 kV X-ray tube voltage, 500 μA current, 150 ms exposure time, and 120 rotation steps. Micro-PET static acquisition was subsequently performed for 10 min and the data were processed using the ordered set expectation maximization algorithm for three-dimensional PET reconstruction. Micro-PET/CT images were analyzed with an Inveon Research Workplace 4.1 (Siemens, Erlangen, Germany). The maximum standardized uptake value (SUVmax; g/ml) of the xenograft was measured before and 28 days after treatment, and the ratio of SUVmax (RSUVmax) was calculated according to the formula of RSUVmax=left SUVmax/right SUVmax.
+ Open protocol
+ Expand
3

Quantitative PET/CT Imaging of Lung Uptake

Check if the same lab product or an alternative is used in the 5 most similar protocols
18F-FDG was synthesized and kindly provided by the PET Centre of our hospital. The animals were fasted overnight before the experiment. 18F-FDG (250 µCi in 0.2 mL) was intravenously injected 0.5 h prior to PET scanning. Then, the mice were anesthetized and placed prone in the center of a Siemens Inveon combined micro PET-CT scanner (Siemens Preclinical Solution USA, Inc., Knoxville, TN, USA) with limbs stretched. MicroCT scanning was conducted with the following parameters: 80-kV X-ray tube voltage, 500-μA source current, 120-ms exposure time, and 120 rotation steps. A 10-min PET static acquisition was performed, and the corresponding images were reconstructed by the OSEM (ordered set expectation maximization) algorithm for 3D PET reconstruction. Inveon Research Workplace 4.1 (Siemens, Erlangen, Germany) was used to analyze the acquired images. The standardized uptake value (SUV, the unit of SUV is g/ml) was calculated by the formula: SUV=RTA/cm3RID×BW RTA represents the measured radiotracer tissue activity (mCi), RID refers to the radiotracer injected dose (mCi), and BW is the body weight (g) of the model mouse. The maximum SUV (SUVmax) in the lung was recorded.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!