Log In Sign up
The largest database of trusted experimental protocols

Copper 1 iodide

Manufactured by Merck Group
Visit Supplier
Sourced in United States, Germany

Copper(I) iodide is a chemical compound with the formula CuI. It is a crystalline solid that is insoluble in water. Copper(I) iodide is used in various applications, including as a catalyst, a photographic developer, and a pigment.

Automatically generated - may contain errors

Lab products found in correlation

1 dodecanethiol, by Merck Group (5 mentions) Oleylamine, by Merck Group (5 mentions) Oleic acid, by Merck Group (5 mentions) Triethylamine, by Merck Group (4 mentions) Methanol, by Merck Group (4 mentions) 1 octadecene, by Merck Group (3 mentions) Indium 3 acetate, by Merck Group (3 mentions) Sodium hydroxide (naoh), by Merck Group (3 mentions) Zinc stearate, by Merck Group (2 mentions) Trimethylsilyl acetylene, by Merck Group (2 mentions) Hexane, by Merck Group (2 mentions) Bis triphenylphosphine palladium 2 dichloride, by Merck Group (2 mentions) N hexane, by Daejung Chemicals (2 mentions) Methanol, by Avantor (2 mentions) Copper 1 acetate, by Merck Group (2 mentions) Sodium azide, by Merck Group (2 mentions) Indium nitrate hydrate, by Merck Group (2 mentions) Ethanol, by Merck Group (2 mentions) Potassium carbonate, by Merck Group (2 mentions) Sodium n dodecyl sulfate, by Thermo Fisher Scientific (2 mentions)

Close spelling variants of this product

Copper(I) iodide (CuI, Copper iodide

31 protocols using copper 1 iodide

1

Synthesis of Colloidal Semiconductor Nanocrystals

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copper (I) iodide (CuI, 99.99%), indium acetate (In (AC)3, 99.99%), zinc acetate (Zn (ac)2, 99.99%), 1-octadecence (ODE, 90%), 1-octanethiol (OT, 98%), zinc stearate (Zn-St, 99.99%), oleic acid (OA, 90%) and 2-Ethylhexanoic acid (EHA, 99%) were purchased from Sigma-Aldrich. Octane, ethanol and acetone were purchased from Aladdin. All the chemicals were used without further purification.
Zang S., Zhang X., Sun Y., Li N., Wang L, & Li L.S. (2022). Ligand-assisted structure tailoring of highly luminescent Cu-In-Zn-S/ZnS//ZnS quantum dots for bright and stable light-emitting diodes. Frontiers in Chemistry, 10, 1102514.
+ Open protocol
+ Expand
2

Synthesis and Characterization of Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copper(I) iodide (CuI, 99.9%), indium(III) acetate (In(OA)3, 99.9%), zinc stearate (ZnO, 12.5–14%), 1-dodecanethiol (DDT, 98%), oleylamine (97%), oleic acid (OA, 90%), 1-octadecene (ODE, 90%), calcein-AM, propidium iodide (PI), p-nitrosodimethylaniline, and 2′,7′-dichlorodihydrofluorescein diacetate (DCFH-DA) were purchased from Sigma-Aldrich and used as received without further purification. DSPE-PEG-2K was purchased from Yarebio (Shanghai, China). Deionized water (18.2 MΩ·cm resistivity at 25 °C) was used for all tests.
Lv G., Guo W., Zhang W., Zhang T., Li S., Chen S., Eltahan A.S., Wang D., Wang Y., Zhang J., Wang P.C., Chang J, & Liang X.J. (2016). Near-Infrared Emission CuInS/ZnS Quantum Dots: All-in-One Theranostic Nanomedicines with Intrinsic Fluorescence/Photoacoustic Imaging for Tumor Phototherapy. ACS nano, 10(10), 9637-9645.
+ Open protocol
+ Expand
3

Evaluating Abraxane® and free PTX

Check if the same lab product or an alternative is used in the 5 most similar protocols
Abraxane® (nab-PTX- NPs containing albumin-bound PTX) was purchased from Celgene (Uxbridge, UK) and PTX was purchased from Mylan (Saint-Priest, France) for treatment efficacy study using free PTX. Triethylamine (≥99.5%), copper (I) iodide (99.999%), Nile Red (NR) for microscopy, BSA and bovine liver catalase were all obtained from Sigma-Aldrich (Prague, Czech Republic) and were used without further purification. AlexaFluor® 647 was purchased from Life Technologies (Carlsbad, CA, USA). For NP encapsulation, PTX was purchased from Aurisco (Yangzhou, People’s Republic of China). Polymethylmethacrylate (PMMA) standards were purchased from Polymer Source (Canada). All solvents, unless otherwise stated, were used without further purification.
Pandya A.D., Jäger E., Bagheri Fam S., Höcherl A., Jäger A., Sincari V., Nyström B., Štěpánek P., Skotland T., Sandvig K., Hrubý M, & Mælandsmo G.M. (2019). Paclitaxel-loaded biodegradable ROS-sensitive nanoparticles for cancer therapy. International Journal of Nanomedicine, 14, 6269-6285.
+ Open protocol
+ Expand
4

Synthesis of Tribromobenzene Derivative

Check if the same lab product or an alternative is used in the 5 most similar protocols
1,3,5‐tribromobenzene (98%), tetrakis(triphenylphosphine)palladium (0) (99%), copper(I) iodide (≥99.5%), trimethylsilyl acetylene (≥98.0%), sodium hydroxide (≥99.0%), methyl alcohol (HPLC, ≥99.9%), hexane (99%), poly (methyl methacrylate), sodium molybdate (≥98.0%), optiPrep density gradient medium were purchased from Sigma‐Aldrich Inc. and used without purifications. The details synthesis processes are in Supporting Information.
Do D.P., Hong C., Bui V.Q., Pham T.H., Seo S., Do V.D., Phan T.L., Tran K.M., Haldar S., Ahn B., Lim S.C., Yu W.J., Kim S., Kim J, & Lee H. (2023). Highly Efficient Van Der Waals Heterojunction on Graphdiyne toward the High‐Performance Photodetector. Advanced Science, 10(25), 2300925.
+ Open protocol
+ Expand
5

Synthesis of Functionalized Organic Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
1,3,5-Tribromobenzene (98%), trimethylsilyl-acetylene (98%), trimethylsilyl azide (94%), and diethylamine (99%) were purchased from Alfa Aesar (Ward Hill, MA, USA). Sodium nitrite (97%), phosphate buffered saline (PBS) tablets, and copper(II) chloride dihydrate were obtained from EMD Chemicals (Gibbstown, NJ, USA). Glutathione (98%) was purchased from AMRESCO (Solon, OH, USA). Low molecular weight chitosan (96% deacetylated) and copper(I) iodide (99.5%) were purchased from Sigma-Aldrich (St. Louis, MO, USA). Deionized water (18.2 MΩ·cm) was obtained from a Millipore Direct-Q water purification system (EMD Millipore, Billerica, MA, USA). Ultrahigh purity nitrogen and oxygen gases were supplied by Airgas (Denver, CO, USA). Bis(triphenylphosphine)-palladium(II) dichloride (98%) was purchased from TCI America (Portland, OR, USA). All materials were used as received without any further purification.
Neufeld M.J., Lutzke A., Tapia J.B, & Reynolds M.M. (2017). Metal−Organic Framework/Chitosan Hybrid Materials Promote Nitric Oxide Release from S‑Nitrosoglutathione in Aqueous Solution. ACS applied materials & interfaces, 9(6), 5139-5148.
+ Open protocol
+ Expand
6

Synthesis of Conjugated Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Toluene
(anhydrous, 99.8%),
mEthanol (anhydrous, 99.8%), borane–tetrahydrofuran complex
solution 1 M in tetrahydrofuran (BH3OC4H8, 1 M in tetrahydrofuran), 1,4-diethynylbenzene (C8H6, 96%), 1-octene (C10H6, 96%),
silica-gel [(40–63) μm], magnesium sulfate (MgSO4, anhydrous, >99.0%), 2,5-dibromo-3-hexylthiophene (97%),
bis(triphenylphosphine)palladium(II) dichloride (Pd(PPh3)2Cl2, 98%), copper(I) iodide (CuI, >98.0%),
and triethylamine (TEA) (N(C2H5)3, 99.0%) were purchased from Sigma-Aldrich. Ethanol (C2H5OH, 99.5%), n-hexane (C7H16, 95%), mEthanol (CH3OH, 99.5%), and chloroform
(CHCl3, 99.7%) were purchased from Dae-Jung (South Korea),
and hydrofluoric acid [(48–51)%] was purchased from J.T. Baker.
Le T.H., Choi Y.H., Kim K.J, & Jeong H.D. (2019). Electronic Coupling in π-Conjugated Molecule-Bridged Silicon Quantum Dot Clusters Synthesized by Sonogashira Cross-Coupling Reaction. ACS Omega, 4(2), 3133-3145.
+ Open protocol
+ Expand
7

Synthesis of Colloidal Metal-Chalcogenide Nanocrystals

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copper(i) iodide (CuI, 99.99%), indium(iii) acetate (In(OAc)3, 99.99%), zinc(ii) acetate (Zn(OAc)2, 99.99%), 1-dodecanethiol (99.9%), 1-octadecylamine (97%), 1-octadecene (90%), and γ-(mercaptopropyl)trimethoxysilane (95%) were purchased from Sigma-Aldrich Corp. (USA) and used without further purification.
Wang H., Hu J., Zhu M., Li Y., Qian H., Shen X., Liebner F, & Rosenau T. (2019). Full-color-emitting (CuInS2)ZnS-alloyed core/shell quantum dots with trimethoxysilyl end-capped ligands soluble in an ionic liquid. RSC Advances, 9(44), 25576-25582.
+ Open protocol
+ Expand
8

Colloidal Copper Sulfide Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copper(i) iodide (CuI, 99.5%), copper(i) acetate (CuOAc, 97%), oleylamine (OAm, 70%), sulfur powder (99.98%), tetrachloroethylene (TCE, spectroscopy grade Uvasol), and diphenylether (DPE, 99%) were purchased from Sigma-Aldrich; toluene (99.5%) and methanol (>99.9%) were purchased from VWR, and acetone (99%) was purchased from Th. Geyer. Chemicals were used as received without additional purification.
Lesyuk R., Klein E., Yaremchuk I, & Klinke C. (2018). Copper sulfide nanosheets with shape-tunable plasmonic properties in the NIR region †Electronic supplementary information (ESI) available. See DOI: 10.1039/c8nr06738d. Nanoscale, 10(44), 20640-20651.
+ Open protocol
+ Expand
9

Synthesis of Diverse Chemical Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
Urea was purchased from Merck; thioUrea was purchased from Apolda (DDR); diethyl ethylmalonate was purchased from J&K (Germany); sodium azide, sodium hydride, copper(I) iodide, and potassium tert-butoxide were purchased from Sigma Aldrich (Germany); diethyl malonate, 10-bromo-1-decene, 5-cloro-1-pentyne, and diisopropylethylamine were purchased from TCI (Belgium). All chemicals listed here were used without any purification unless otherwise stated. Solvents handling and the chemicals that are not mentioned here can be found in the Supplementary Materials.
Li C., Hilgeroth P., Hasan N., Ströhl D., Kressler J, & Binder W.H. (2021). Comparing C2=O and C2=S Barbiturates: Different Hydrogen-Bonding Patterns of Thiobarbiturates in Solution and the Solid State. International Journal of Molecular Sciences, 22(23), 12679.
+ Open protocol
+ Expand
10

Synthesis of Colloidal Nanocrystals

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copper(I) iodide (CuI, ≥ 99.5%), iron(III)
acetylacetonate (Fe(acac)3, ≥ 99.9%), 1-octadecene
(ODE, technical grade, 90%), oleylamine (OLAM, technical grade, 70%),
and 1-dodecanethiol (DT, ≥ 98%) were purchased from Sigma-Aldrich.
Tri-n-octylphosphine (TOP, 97%) was procured from Strem Chemicals.
α-Methoxy-ω-mercapto polyethylene glycol (SH-PEG-OCH3, MW: 2000 g mol–1) was purchased from Rapp
Polymere. Anhydrous chloroform, methanol, and isopropanol were purchased
from Carlo Erba reagents. All chemicals were used as received. A Milli-Q
Millipore system was used for the purification of water (resistivity
≥ 18 MΩ cm).
Ghosh S., Avellini T., Petrelli A., Kriegel I., Gaspari R., Almeida G., Bertoni G., Cavalli A., Scotognella F., Pellegrino T, & Manna L. (2016). Colloidal CuFeS2 Nanocrystals: Intermediate Fe d-Band Leads to High Photothermal Conversion Efficiency. Chemistry of Materials, 28(13), 4848-4858.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!