The largest database of trusted experimental protocols

Fuji dri chem 3500i

Manufactured by Sysmex
Sourced in Germany

The Fuji Dri-Chem 3500i is an automated chemistry analyzer designed for in-vitro diagnostic testing. It utilizes a dry chemistry technology to perform a variety of clinical chemistry tests on small sample volumes. The device is capable of analyzing multiple parameters simultaneously and provides rapid, accurate, and reliable results.

Automatically generated - may contain errors

5 protocols using fuji dri chem 3500i

1

Measuring Troponin I and Lactate Dehydrogenase in Sepsis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Troponin I was measured in 1:10 diluted serum samples by a commercially available ELISA kit (USCN, Life science Inc., Wuhan, China). The procedure was followed to manufacturer’s instructions. Lactate dehydrogenase was measured using the clinical chemistry analyzer Fuji Dri-Chem 3500i (Sysmex, Leipzig, Germany) according to manufacturer’s instructions. For analysis, data were obtained from n = 4 at baseline and at least n ≥ 7 animals following polymicrobial sepsis from each stratum and time point (SMPD1+/+, SMPD1−/−, dSMPD1+/+, dSMPD1−/−).
+ Open protocol
+ Expand
2

Blood Profiling for Organ Dysfunction

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood was withdrawn by puncturing the cheek vein and collected in Li-Heparin-anticoagulated blood tubes. White blood cells (WBC), red blood cells (RBC), haematocrit (HCT) and platelets were analysed by automated veterinary haematology (Poch-100iv-Diff; Sysmex, Leipzig, Germany). In order to monitor organ failure, plasma was obtained by centrifugation of blood samples. Plasma levels of lactate dehydrogenase (LDH), glutamic-oxaloacetic transaminase (GOT) and glutamic-pyruvic transaminase (GPT) were determined using the clinical chemistry analyser (Fuji Dri-Chem 3500i; Sysmex, Leipzig, Germany).
+ Open protocol
+ Expand
3

Hepatobiliary Dysfunction Assessment in Sepsis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Serum from each stratum (smpd1+/+, smpd1+/−, p-smpd1+/+, t-smpd1+/+) at baseline, 24 hours, day 3 and 28 following sepsis induction was used for analysis of clinically used laboratory parameters of hepatobiliary damage and dysfunction (total-bilirubin T-Bil and γ-glutamyl-transferase γ-GT) using the clinical chemistry analyzer Fuji Dri-Chem 3500i (Sysmex, Leipzig, Germany) according to manufacturer’s instructions.
+ Open protocol
+ Expand
4

Biomarkers of Cell Damage in Sepsis

Check if the same lab product or an alternative is used in the 5 most similar protocols
During the course of the systemic inflammation, clinically approved markers of cell damage—aspartate aminotransferase (AST) and lactate dehydrogenase (LDH)—were analysed in serum of wild-type (n = 8) as well as SMPD1 heterozygous littermates (n = 8) at baseline (control), 24 h and 28 days following sepsis induction using the clinical chemistry analyser Fuji Dri-Chem 3500i (Sysmex, Leipzig, Germany) according to manufacturer’s instructions.
+ Open protocol
+ Expand
5

Cytokine and Biomarker Profiling in Patients

Check if the same lab product or an alternative is used in the 5 most similar protocols
The plasma cytokine concentrations of IL-6, IL-8 and IL-10 were quantified using a flow cytometry-based multiplex assay according to the manufacturers instructions (BD, Cat. No. 551811). Data were acquired by FACS Calibur (BD) and BD CellQuest Pro software. Data were analyzed using the FCAP Array v1.0.1 software. Automated clinical chemistry analyzer (Fuji Dri-Chem 3500i; Sysmex, Germany) was used for measurements of lactate dehydrogenase activity within the supernatant. Other laboratory parameters as CRP, PCT (normal value <0.05 μg/l), blood count and plasma creatinine levels were also measured at automated clinical chemistry analyses as part of the standard laboratory procedures at the Jena university hospital.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!