Anhydrous acn

Manufactured by Merck Group

Anhydrous ACN is a laboratory reagent used as a solvent and chemical intermediate. It is a clear, volatile liquid with a characteristic odor. Anhydrous ACN has a high boiling point and is miscible with a wide range of organic solvents. It is commonly used in various chemical synthesis and analytical applications.

Automatically generated - may contain errors

Lab products found in correlation

Litfsi, by Merck Group (1 mentions) Hydroxylamine, by Merck Group (1 mentions) Tmt10plex, by Thermo Fisher Scientific (1 mentions) 3 trimethoxysilyl propyl methacrylate γ maps, by Merck Group (1 mentions) Titrisol solutions, by Merck Group (1 mentions) Milli q purification system, by Merck Group (1 mentions) Hplc grade acn, by Carlo Erba (1 mentions) Isooctane, by Carlo Erba (1 mentions)

Close spelling variants of this product

Anhydrous acetonitrile (ACN (2 citations)

3 protocols using anhydrous acn

Fabrication of Composite Solid Electrolytes

Check if the same lab product or an alternative is used in the 5 most similar protocols

PEO (M_w: 3×10⁵ g mol⁻¹, Sigma‐Aldrich) and LiTFSI (Sigma‐Aldrich) was dried under vacuum at 60 and 100 °C for 24 h prior to use. Anhydrous ACN (Sigma‐Aldrich) was used as received. LLZO with the composition of Li_6.4La₃Zr_1.4Ta_0.6O₁₂ were synthesized by solid‐state reaction,^[⁴⁹
^] and then high‐energy ball‐milled. PEO/LiTFSI and cast‐CSE were prepared by tape casting the PEO/LiTFSI/ACN solution and LLZO/PEO/LiTFSI/ACN solution with EO/Li ratio of 8 and then dried in a vacuum oven at 50 °C for 48 h. ES‐CSE (or AES‐CSE) was prepared by electrospinning with the LLZO/PEO/LiTFSI/ACN as core solution and PEO/LiTFSI/ACN as shell solution under 17 kV using a drum collector rotating at 60 rpm (or 800 rpm) and then dried in a vacuum oven at 50 °C for 48 h. The LLZO contents in the core solutions were 15 to 48 wt%.

Guo Z., Pang Y., Xia S., Xu F., Yang J., Sun L, & Zheng S. (2021). Uniform and Anisotropic Solid Electrolyte Membrane Enables Superior Solid‐State Li Metal Batteries. Advanced Science, 8(16), 2100899.

+ Open protocol

+ Expand

TMT Labeling for Quantitative Proteomics

Check if the same lab product or an alternative is used in the 5 most similar protocols

TMT‐10plex (Thermo Fisher: 90110) labels (0.8 mg) were resuspended in 100 μl anhydrous ACN (Sigma: 271004), vortexed and incubated for 5 min at room temperature. Freeze‐dried eluted peptides were resuspended in 80 μl 100 mM TEAB (Thermo Fisher: 90114) and incubated in an ultrasonic bath for 15 min. Seventy microlitres of each sample was combined with 30 μl of the respective TMT10plex label (see Table EV2). TMT reaction was carried out at room temperature for 2 h. An aliquot of 10 μl of each sample was taken, and the reaction was stopped by addition of 50% (w/v) hydroxylamine (Sigma: 467804) to a final concentration of 5% (v/v). Stopped TMT reactions were combined and freeze‐dried overnight.

Muñoz I.M., Morgan M.E., Peltier J., Weiland F., Gregorczyk M., Brown F.C., Macartney T., Toth R., Trost M, & Rouse J. (2018). Phosphoproteomic screening identifies physiological substrates of the CDKL5 kinase. The EMBO Journal, 37(24), e99559.

+ Open protocol

+ Expand

Cocaine and Metabolite Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols

Stock solutions at 1 mg mL -1 of BZE in MeOH and cocaine base were provided by Sigma-Aldrich (Saint-Quentin-Fallavier, France). The working solutions at 1 µg mL -1 were obtained by dilution of the stock solution (1 mg mL -1 ) in HPLC-grade ACN (Carlo Erba, Val-de-Reuil, France). These solutions were stored at -20°C. MeOH, EtOH, and isooctane were purchased from Carlo Erba. Acetic acid and anhydrous ACN were provided by Sigma-Aldrich. 1 M NaOH and 0.1 M HCl were obtained using deionized water (Milli-Q purification system, Millipore, Molsheim, France) and Titrisol solutions from Merck (Darmstadt, Germany). MAA, TRIM, and 3-(trimethoxysilyl)propyl methacrylate (γ-MAPS) were purchased from Sigma-Aldrich. Azo-N,N'-diisobutyronitrile (AIBN) was purchased from Acros Organics (Noisy-le-Grand, France). MAA was distilled under vacuum in order to remove inhibitors and stored at -20°C. TRIM, AIBN, and γ-MAPS were of satisfactory purity so they were used without further purification. Fused-silica capillaries with a UV transparent fluorocarbon polymer coating (PTFE-coated silica capillaries, 100 µm i.d. x 375 µm outer diameter (o.d.)) were purchased from Polymicro Technologies (Photon Lines, Saint Germain-en-Laye, France).

Bouvarel T., Chendo C., Delaunay N, & Pichon V. (2021). Simplified miniaturized analytical set-up based on molecularly imprinted polymer directly coupled to UV detection for the determination of benzoylecgonine in urine. Talanta, 233.

+ Open protocol

+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Revolutionizing how scientists
search and build protocols!