The largest database of trusted experimental protocols

12 protocols using zinc 2 nitrate hexahydrate

1

Organometallic Surface Functionalization

Check if the same lab product or an alternative is used in the 5 most similar protocols
The following chemicals were used: 4-mercaptopyridine (MPyr, 95%, Sigma-Aldrich), ethanol (99.5%, Acros), zinc(II) nitrate hexahydrate (98%, Sigma-Aldrich), 2-methylimidazole (99%, Sigma-Aldrich), pyrrole (98%, Sigma-Aldrich), pyrrole-d5 (98 atom% D, Sigma-Aldrich), methanol (99.9%, Sigma-Aldrich), formaldehyde (16% w/v in H2O, Thermo Scientific). Substrates of 60 nm Au on Si, with a 5 nm Ge adhesion layer, were provided by AMOLF.
+ Open protocol
+ Expand
2

Trace Metal Analysis of Food Samples

Check if the same lab product or an alternative is used in the 5 most similar protocols
All chemicals used in the present study were of the analytical grade. Quinine hemisulfate salt, ethylenediaminetetraAcetic acid, mercury(ii) nitrate, lead(ii) nitrate, cobalt(ii) nitrate hexahydrate, zinc(ii) nitrate hexahydrate, copper(ii) nitrate trihydrate, and cadmium(ii) nitrate tetrahydrate were purchased from Sigma-Aldrich, Germany. Sodium phosphate monobasic, disodium phosphate, sodium acetate, sodium chloride, calcium(ii) nitrate tetrahydrate, iron(iii) chloride hexahydrate, and iron(ii) sulfate were obtained from QReC™, New Zealand. Aluminium(iii) chloride, manganese(ii) sulfate monohydrate, nickel(ii) chloride, silver(i) chloride, and magnesium chloride were procured from Carlo Erba, Italy. Chromium(iii) nitrate and potassium dichromate were purchased from Acros Organics™, USA. Acetic acid was supplied by Merck, Germany. Hydrogen peroxide was purchased from Ajax Finechem, Australia. All food samples and shallot were obtained from the local market of Thailand.
+ Open protocol
+ Expand
3

Synthesis of Methanetetrayltetrakis(benzene-4,1diyl)tetrakis(aza)tetrakis(methan-1-yl-1-yliden)tetrabenzoic Acid

Check if the same lab product or an alternative is used in the 5 most similar protocols
All chemicals used in the synthesis of methanetetrayltetrakis(benzene-4,1diyl)tetrakis(aza))tetrakis (methan-1-yl-1-yliden) tetrabenzoic acid, H4MTA: triphenylmethanol (97%), aniline (99.5%), ethyl 4-aminobenzoate (benzocaine, ≥98%), oxone (≥99%), Pd/C (10% Pd basis), RANEY® Nickel aluminium alloy (50% Al basis, 50% Ni basis), hydrazine monohydrate (80% solution in H2O), sodium hydroxide (90%), sodium bicarbonate (99.5%), anhydrous sodium sulphate (99%), isopentyl nitrite (≥97%), hypophosphorus acid (50 wt% in H2O), ethanol (99.8%), methanol (extra dry, ≥99%), glacial acetic acid (≥99%), tetrahydrofufan (99%), dichloromethane (99.5%), acetic anhydride (≥98%), hydrochloric acid (36%), fuming acid (99% HNO3), sulphuric acid (97%) and amorphous porous materials: zinc(ii) nitrate hexahydrate (≥98%), cadmium(ii) nitrate tetrahydrate (98%), N,N′-dimethylformamide (≥99%) were obtained from Sigma-Aldrich, Acros Organics or eMolecules companies, and used without further purification.
+ Open protocol
+ Expand
4

Quantitative Analysis of Metal Ions

Check if the same lab product or an alternative is used in the 5 most similar protocols
Standard solutions of five target metal ions were copper(II) nitrate trihydrate (Sigma-Aldrich), cobalt(II) chloride (Sigma-Aldrich), mercury(II) chloride (Sigma-Aldrich), nickel(II) sulfate hexahydrate (Alfa Aesar), and manganese(II) chloride tetrahydrate (Chem-Impex International Inc). Interfering ions were potassium nitrate (Sigma-Aldrich), sodium nitrate (Aldrich), magnesium chloride hexahydrate (Alfa Aesar), and calcium nitrate tetrahydrate (Alfa Aesar) as common ions found in waters and cadmium(II) nitrate tetrahydrate (Sigma-Aldrich), lead(II) nitrate (Sigma-Aldrich), zinc(II) nitrate hexahydrate (Sigma-Aldrich), potassium dichromate (Alfa Aesar), iron(III) chloride (Sigma-Aldrich), iron(II) sulfate heptahydrate (Sigma-Aldrich), vanadium(III) chloride (Sigma-Aldrich) were also studied.
Metal ion solutions were prepared in acetate buffer (0.1 M, pH 5.0). Acetate buffer was prepared by dissolving sodium acetate (Merck) and acetic acid (Sigma-Aldrich) in Milli-Q water (Millipore Milli-Q purification system, R ≥ 18.2 MΩ cm−1). Complexing agents, masking agents, and all reagents were prepared and used without purification as shown in Table S1 and S2.
+ Open protocol
+ Expand
5

Synthesis of Metal Xanthogenate Complexes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Potassium ethyl xanthogenate (96%), antimony(III) chloride (SbCl3, ≥ 99.95%), copper(II) chloride dihydrate (CuCl2 2H2O, 99.99%), bismuth(III) chloride (BiCl3, ≥ 98%), Zinc(II) nitrate hexahydrate (Zn(NO3)2 6 H2O, ≥ 98%), methanol (99.8%), ethanol (95.0%), chloroform (CHCl3, ≥ 99%), Hexane (C6H14, ≥ 99%) were purchased from Sigma-Aldrich.
+ Open protocol
+ Expand
6

Synthesis and Characterization of ZIF-8/ZIOS

Check if the same lab product or an alternative is used in the 5 most similar protocols
Zinc(II) nitrate hexahydrate (≥98%), 2-methylimidazole (>99%), salicylaldoxime, copper(II) chloride dehydrate, calcium(II) nitrate tetrahydrate, iron(II) chloride tetrahydrate, iron(III) chloride, nickel(II) nitrate hexahydrate, manganese(II) chloride, and sodium chloride were purchased from Sigma-Aldrich and used as received. Anhydrous methanol (>99.8%, Sigma-Aldrich) and Milli-Q water (18.2 MΩ cm−1) were used in the synthesis of ZIF-8/ZIOS and ion solution preparations, respectively.
+ Open protocol
+ Expand
7

Copper-Zinc Co-precipitation Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
The following raw materials were used for co-precipitation: copper(ii) nitrate trihydrate (p.a. 99–104%, Sigma-Aldrich), zinc(ii) nitrate hexahydrate (98%, Sigma-Aldrich), copper(ii) acetate hydrate (98%, Sigma-Aldrich), zinc(ii) acetate dihydrate (≥97%, Alfa Aesar), urea (99%), deionized water was used from a Millipore system. The commercial methanol synthesis catalyst (Cu/ZnO/Al2O3) was purchased from Alfa Aesar (Product ID: 45776).
+ Open protocol
+ Expand
8

Synthesis of Metal Acetate and Nitrate Complexes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copper(II) acetate monohydrate (puriss. p. a., ≥99.0 %), zinc(II) acetate dihydrate (puriss. p. a., ≥99.0 %), manganese(II) acetate tetrahydrate (99+%) copper(II) nitrate hemipentahydrate, zinc(II) nitrate hexahydrate, manganese(II) nitrate tetrahydrate, cerium nitrate, magnesium(II) nitrate hexahydrate, sodium carbonate, and cerium acetylacetonate hydrate were all purchased from Sigma–Aldrich. Magnesium(II) acetate tetrahydrate (analytical) was obtained from Amresco. Ethanol (absolute 99.8 %, Certified AR) was purchased from Fischer Scientific and CO2 (CP grade) was provided by BOC. All purchased materials were used as received. Deionised water was provided in‐house.
+ Open protocol
+ Expand
9

Metal-Organic Framework Synthesis and Antiretroviral Evaluation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Zinc(II) nitrate hexahydrate (Zn(NO 3 ) 2 Á6H 2 O 499%), 2-methylimidazole (2-Me-Him) and zirconium(IV) chloride (ZrCl 4 499%) were from Sigma-Aldrich (St. Louis, MO, USA). Meso-tetra(4carboxyphenyl) porphyrin (H4TCPP) was obtained from Frontier Scientific (Newark, DE, USA). The antiretrovirals tenofovir and nevirapine agents were from Sigma Aldrich (St. Louis, MO, USA), bictegravir was from CSN pharm (Arlington Heights, IL, USA) and emtricitabine was from Abcam (Cambridge, UK). TLR-7 and -9 agonists were purchased from Cayman Chemical Company (Ann Arbor, MI, USA) and InvivoGen (San Diego, CA, USA). Other reagents and solvents were purchased as reagentgrade and used without further purification.
The buffer solutions used in the study were prepared with HCl/NaCl at pH = 2.2 and NaH 2 PO 4 /Na 2 HPO 4 at pHs = 5.5 and 7.4. The pH was adjusted using a pH-meter basic 20+ from Crison (Barcelona, Spain).
All solutions were prepared with deionized water (from a Millipore Milli-Q system, Burlington, U.S.A.) with a conductivity o10 À6 S m À1 .
+ Open protocol
+ Expand
10

Metal-Organic Framework for Diclofenac Removal

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copper(II) nitrate trihydrate (Cu(NO3)2·3H2O), silver(I) nitrate (AgNO3), calcium(II) nitrate tetrahydrate (Ca(NO3)2·4H2O), cobalt(II) nitrate hexahydrate (Co(NO3)2·6H2O), manganese(II) nitrate tetrahydrate (Mn(NO3)2·4H2O), zinc(II) nitrate hexahydrate (Zn(NO3)2·6H2O), benzene-1,3,5-tricarboxylic acid (H3BTC), and methylene blue (MB) were purchased from Sigma Aldrich, Taufkirchen, Germany. N,N-dimethyl formamide (DMF) was procured from Samchun Pure Chemicals, Pyeongtaek-si Korea. Diclofenac sodium salt (DCF, C14H10Cl2NNaO2) was procured from TCI Chemicals, Tokyo, Japan. Pure H2S (500 ppm) balanced with N2 gas was procured from Union gas, Seoul, Korea.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!