The largest database of trusted experimental protocols

Abx pentra

Manufactured by Horiba
Sourced in France

The ABX Pentra is a versatile hematology analyzer designed for clinical laboratories. It is capable of performing complete blood count (CBC) analysis, including the measurement of red blood cells, white blood cells, and platelets. The ABX Pentra is a reliable and efficient instrument for providing accurate and standardized blood analysis results.

Automatically generated - may contain errors

11 protocols using abx pentra

1

Blood Sampling and Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The blood samples were collected in an ethylenediamine tetra acetic acid EDTA tube from each participant on the days of the experimental trial under an aseptic technique. The blood was collected on nutritional trial day from each participant fasting at baseline on 0 min, 30 min after supplementation and after breakfast and lunch. Blood samples were centrifuged by 4000 rpm for 10–15 min in refrigerated centrifuge. The plasma supernatant was collected in Eppendorf tubes and stored at −80°C before analysis.
For insulin analysis the Abbott Architect c8000 system was used, utilizing potentiometric and photometric technology on immunoassay tests, utilizing CM1A (Chemiluminescent Microparticles assay). The glucose concentration was determined by enzymatic calorimetric method by using kits containing (glucose HK-CP reagent ABX Pentra, Horiba ABX, France) on the spectrophotometric analyser on automatic Roche Cobas Mira.
+ Open protocol
+ Expand
2

Quantitative Lipoprotein Profiling by Ultracentrifugation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Quantification of lipoprotein (LP) particles was performed using ultracentrifugation (UC) as previously described (1). Seven different lipoprotein molecules including cholesterol (chol), triglycerides (tg), cholesterol ester (chole), free cholesterol (fchol), phospholipids (phosl), apolipoprotein A (apoA) and apolipoprotein B (apoB) were quantified in all or in some of the LP main fractions (VLDL, IDL, HDL, LDL) and/or in their subfractions (HDL2a, HDL2b, HDL3, LDL1, LDL2, LDL3, LDL4, LDL5, LDL6). Fractionation was done by sequential centrifugation of 3 mL EDTA plasma using an Optima L-80 XP ultracentrifuge with a fixed angle rotor type 50.4
Ti (Beckman Coulter, Inc., US). The UC process was initiated immediately after the fasting plasma sample was collected, and it was completed over a period of 8 days. A detailed description of the separation steps can be found in (1). Immediately after the fractionation step, all subfractions were frozen and stored at -80⁰C for later analysis.
Colorimetric and turbidimetric assays were performed on an ABX Pentra 400 analyzer (ABX Pentra; Horiba ABX, Montpellier, France) to determine the plasma, main class and subclass concentrations of total chol, tg, apoA and apoB (ABX Pentra; Horiba Medical, France). Free cholesterol and phoslp were determined using colorimetric and turbidimetric assays (MTI Diagnostics, Germany).
+ Open protocol
+ Expand
3

Insulin and Metabolic Biomarker Quantification

Check if the same lab product or an alternative is used in the 5 most similar protocols
Insulin was measured using a Mouse/Rat Insulin kit from Meso Scale Discovery (K152BZC-1). Enzymatic colorimetric methods, assayed on the ABX Pentra 400 (Horiba ABX), were used for analysis of: glucose (Glucose HK CP, A11A01667 Horiba ABX), TGs (Trig/GB, 11877771216, Roche Diagnostics GmbH), cholesterol (Cholesterol CP ABX Pentra, A11A01634, HORIBA ABX), β-hydroxybutyrate (RANBUT: D-3-hydroxybutyrate, RB1007, Randox) and free fatty acids (NEFA-HR[2] WaKO Chemicals GmbH). Liver tissue TG levels were assessed after homogenization of approximately 50 mg tissue in isopropanol followed by analysis of TG levels in the supernatant (TGs CP, ABX Pentra, A11A01640, Horiba ABX).
+ Open protocol
+ Expand
4

Multimodal Blood Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
A whole blood sample was used for blood count analysis using an automatic haematology
analyser ABC Vet (Horiba, Kyoto, Japan). Plasma obtained after centrifugation
(acceleration: 1000 × g, run time: 10 min, 4°C) was used for measuring
the lipid profile with an ABX Pentra biochemical analyser (Horiba Medical Kyoto,
Japan).
Measurement of nitrate ( NO3 ) and nitrite ( NO2 ) concentrations in the plasma was performed using an
ENO-20 NOx analyser (Eicom Corp., Kyoto, Japan), applying a liquid chromatography method
with post-column derivatization using Griess reagent, as previously described.38 (link) The packed RBCs remaining after
centrifugation were used for gluthatione (GSH) and glutathione disulfide (GSSG)
concentration measurement as well as nitrosyl haemoglobin (HbNO) detection with EPR
spectroscopy.38 (link),39 (link)
+ Open protocol
+ Expand
5

Automated Lipid and Glucose Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Fasting blood glucose and lipid profiles (total cholesterol, high-density lipoproteins, low-density lipoprotein, and triglycerides) were determined by ABX Pentra automated analyzer (Horiba ABX SAS, Montpellier, France). Lipid profiles were measured by the enzymatic colorimetric test principle, and a series of coupled enzymatic reactions were carried out to form a colored chromogenic complex. The absorbance of the colored dye was measured at a fixed wavelength and is proportional to the concentration of the lipid profile in the sample. The enzymatic method was used to determine glucose, glucose was measured by the PAP-CP, enzymatic photometric method, and then finally absorbance was measured.
+ Open protocol
+ Expand
6

Diethylnitrosamine-induced Liver Injury

Check if the same lab product or an alternative is used in the 5 most similar protocols
Fourteen-day-old mice were injected intraperitoneally with 25 mg/kg of DEN (Sigma) [56 (link)]. Serum ALT and AST levels were determined using ABX Pentra (Horiba Medical).
+ Open protocol
+ Expand
7

Metabolic Biomarker Profiling in Mice

Check if the same lab product or an alternative is used in the 5 most similar protocols
Serum levels of albumin, creatinine, bilirubin, urea, alanine aminotransferase (ALT), cholesterol, low density lipoprotein (LDL) and high density lipoprotein (HDL) were determined using ABX Pentra (Horiba Medical). To perform GTT and ITT, mice were i.p. injected with 2 g of glucose/kg of body weight and 0.75 U insulin/kg of body weight (Eli Lilly; Humalog Insulin), respectively. In the case of GTT mice were previously fasted for 16 h. For ITT mice were not fasted and basal levels of glucose were between 80–100 mg/dL.
+ Open protocol
+ Expand
8

Measurement of Plasma Biomarkers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood BHB was measured by using a handheld monitor and reagent strips (Precision Xtra, Abbott Diabetes Care, Maidenhead, UK). Blood samples were stored on ice and centrifuged; duplicate plasma aliquots were stored at −80°C and analyzed within 6 weeks. Plasma glucose was assayed by using a commercial analyzer (ABX Pentra; HORIBA ABX SAS, Montpellier, France), while insulin and total ghrelin were measured by using commercially available enzyme‐linked immunosorbent assays (ELISA) (Mercodia AB, Uppsala, Sweden, and Merck, Millipore, Germany). Total glucagon‐like peptide 1 (GLP‐1) and peptide tyrosine tyrosine (PYY) assays were performed by the Core Biochemical Assay Laboratory of the National Institute for Health Research Cambridge Biomedical Research Centre (http://www.cuh.org.uk/core-biochemical-assay-laboratory).
+ Open protocol
+ Expand
9

Fasting Plasma Biomarker Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Prior to screening, participants were instructed to fast for 12 hours before the study visit. Venous blood was collected in EDTA tubes, centrifuged at 1500 g for 10 minutes to produce plasma, this was then frozen at −80°C for subsequent measurement of research biomarkers. Quantitative analysis of plasma for human CRP, ApoA1 and ApoB was carried out on the ABX Pentra clinical chemistry analyser and latex-enhanced immunoturbidimetric assay (Horiba medical, Northampton, UK). TNF-α and IL-6 were analysed using the Quantikine high sensitivity ELISA for human TNF-alpha /TNFSF1A and human IL-6 kit, (R&D Systems, UK). Leptin and resistin was assayed using the Mediagnost human enzyme-immunoassay ELISA kits (Reutlingen, Germany). Human adiponectin, insulin and 8-Iso prostaglandin F2 (8-Iso-PG F2) were assayed fluormetrically using the AutoDELFIA 1235 automatic immunoassay systems (Perkin Elma, Buckinghamshire UK). All samples were analysed in duplicate and with all duplicate samples having a CV% of ≤20%. All research biomarker assessments were carried out by University of Leicester Scientists in conjunction with Unilever personnel at the Unilever Corporate Research Laboratory, Bedford UK.
+ Open protocol
+ Expand
10

Metabolic Biomarker Quantification Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Plasma TG, cholesterol, alanine transaminase (ALT) and aspartate transaminase (AST) concentrations were measured with commercial available kits (ABX Pentra, Horiba, Irvine, CA). Hepatic concentrations of TGs and cholesterol were measured using commercial available kits (ABX Pentra) after lipid extraction according to Bligh and Dyer (Bligh & Dyer 1959) (link). Plasma 3,3′,5-triiodothyronine (T3) concentrations were determined by radioimmunoassay as previously described (Friedrichsen et al. 2003) (link).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!