The largest database of trusted experimental protocols

6 protocols using p5655

1

Phytic Acid and Phosphate Determination

Check if the same lab product or an alternative is used in the 5 most similar protocols
Samples were extracted in duplicate according to the following procedure: about 100 mg sample (flours and freeze-dried purées) was suspended in 5 ml of 0.5 M HCl and boiled for 6 min. After drying, the extract was solubilized in milliQ water and injected for phytic acid (IP6) and phosphate content determination using high-performance anion-exchange chromatography (Dionex, Sunnyvale, CA, USA) according to the method described by Baye et al. (2013) (link). Inositol-6-phosphate (IP6) from rice (Sigma, P3168) and KH2PO4 (Sigma, P5655) were used as standards. Results were averaged and expressed in mg/100g on dry matter basis.
+ Open protocol
+ Expand
2

Bacillus subtilis Growth Media Comparison

Check if the same lab product or an alternative is used in the 5 most similar protocols
Parallel cultures of B. subtilis (lab strain) were cultured in rich or mineral media in baffled flasks. Flasks were incubated at 37 °C with continuous stirring at 200 rpm. The rich media was prepared from 10 g/L tryptone (T9410, Sigma-Aldrich), 10 g/L NaCl (27810.295, VWR) and 5 g/L yeast extract (92144, Sigma-Aldrich). The mineral media was prepared in MilliQ-H2O (MQ-H2O) by dissolving 11.2 g/L Na2HPO4-7H2O (S9390, Sigma-Aldrich), 3 g/L KH2PO4 (P5655, Sigma-Aldrich), 0.5 g/L NaCl (27810.295, VWR), 0.5 g/L NH4Cl (A9434, Sigma-Aldrich), 0.2465 g/L MgSO4-7H2O (M5921, Sigma-Aldrich), 0.1470 g/L CaCl2-2H2O (223506, Sigma-Aldrich), 4 g/L glucose (101176K, VWR) and 1 mL/L media of a trace element solution containing 10 g/L FeSO4-7H2O (F8633, Sigma-Aldrich), 2.25 g/L ZnSO4-7H2O (Z0251, Sigma-Aldrich), 2 g/L CaCl2-2H2O (223506, Sigma-Aldrich), 1 g/L CuSO4-5H2O (197722500, Thermo Fisher Scientific), 0.38 g/L MnCl2-4H2O (M5005, Sigma-Aldrich), 0.14 g/L H2BO3 (B6768, Sigma-Aldrich), and 0.1 g/L (NH4)6Mo7O24-4H2O (1011820250, Merck Millipore, Damstadt, Germany). The final media was supplemented with 600 µg/L CoCl2-6H2O (33606, VWR), 1 mg/L biotin (47868, Sigma-Aldrich), and 1 mg/L thiamine hydrochloride (T1270, Sigma-Aldrich).
+ Open protocol
+ Expand
3

Preparation of Defined Microbial Growth Medium

Check if the same lab product or an alternative is used in the 5 most similar protocols
To milli-Q water (1 L) were added KH2PO4 (13.60 g, Sigma-Aldrich, Cat.#P5655), (NH4)2SO4 (2.00 g, Sigma-Aldrich Cat.# A4418) and glucose (2.00 g, Sigma-Aldrich Cat.#G7021), and the pH of the solution was adjusted to 7.00 ± 0.09 with KOH. The medium was then autoclaved at 121 °C with a 30 min sterilization cycle. After the solution cooled down to room temperature, syringe filter-sterilized (0.22 μm nitrocellulose syringe filters) solutions of MgSO4 (1 mL, 0.2 g mL−1 of MgSO4·7H2O, Sigma-Aldrich Cat. #M2773) and FeSO4 (500 μL, 1.0 mg mL−1 of FeSO4·7H2O, Sigma-Aldrich Cat.#F8633) were added to the medium broth. The medium was stored in the dark at room temperature until use.
+ Open protocol
+ Expand
4

Glucose Mineral Medium for Shake Flasks

Check if the same lab product or an alternative is used in the 5 most similar protocols
The glucose mineral medium for shake flasks was prepared in milliQ-H2O (18.2 MΩ cm) by dissolving 11.2 g/l Na2HPO4–7H2O (S9390, Sigma-Aldrich), 3 g/l KH2PO4 (P5655, Sigma-Aldrich), 0.5 g/l NaCl (27810.295, VWR), 1 g/l NH4Cl (A9434, Sigma-Aldrich), 0.2465 g/l MgSO4–7H2O (M5921, Sigma-Aldrich), 4 g/l glucose (101176 K, VWR), 2 ml/l of a 50 mg/l CoCl2–6H2O solution (C8661, Sigma-Aldrich) and 2 ml/l medium of a trace element solution containing 10 g/l FeSO4–7H2O (F8633, Sigma-Aldrich), 2.25 g/l ZnSO4–7H2O (Z0251, Sigma-Aldrich), 2 g/l CaCl2–2H2O (223506, Sigma-Aldrich), 1 g/l CuSO4–5H2O (197722500, Fisher Scientific), 0.38 g/l MnCl2–4H2O (M5005, Sigma-Aldrich), 0.14 g/l H2BO3 (B6768, Sigma-Aldrich) and 0.1 g/l (NH4)6Mo7O24–4H2O (1011820250, Merck).
+ Open protocol
+ Expand
5

Preparation of M9 Buffer for Microbial Cultivation

Check if the same lab product or an alternative is used in the 5 most similar protocols
To create the M9 buffer, 3.0 g of KH2PO4 (potassium phosphate; CASnr. 7778-77-0; e.g., Sigma, P5655), 7.5 g of Na2HPO4 * 2 H2O (sodium phosphate dihydrate; CASnr. 10028-24-7; e.g., Sigma, 30412), and 5.0 g of NaCl (sodium chloride; CASnr. 7647-14-5; e.g., Sigma, S5886) were transferred into an autoclavable 1 L bottle and filled until 1000 mL with Milli-Q. The bottle was autoclaved for 20 min at 120 °C, and let cool to at least 55 °C. In a sterile environment, 1 mL of 1 M MgSO4 (magnesium sulphate; CASnr. 7487-88-9; e.g., Sigma, M2643) was added and mixed well.
+ Open protocol
+ Expand
6

Preparation of Mouse Cerebellar Slices

Check if the same lab product or an alternative is used in the 5 most similar protocols
Five- to seven-week-old C57BL/6J mice (The Jackson Laboratory, RRID:IMSR_JAX:000664) were terminally anesthetized in a CO2 chamber and then transcardially perfused with 1× DPBS (Gibco 14190-250; Thermo Fisher Scientific, Waltham, MA, USA). The cerebellum was extracted and transferred into chilled artificial cerebrospinal fluid (124 mM NaCl; Macron 7581-12, 2.5 mM KCl; Sigma-Aldrich P3911, 2.0 mM MgSO4; Sigma-Aldrich M3409, 1.25 mM KH2PO4; Sigma-Aldrich P5655, 26 mM NaHCO3; Sigma-Aldrich 93350, 10 mM glucose; Macron 4912-12). The cerebellum was sectioned into 300 µm coronal slices using a vibratome Ci 7000 smz (Campden Instruments; Lafayette, IN, USA). Cerebellum slices were submerged in Minimum Essential Media (MEM; Gibco 11095; Thermo Fisher Scientific, Waltham, MA, USA) supplemented with 15% fetal bovine serum (FBS; Gibco 26140079; Themo Fisher Scientific, Waltham, MA, USA), 100 mg/mL penicillin G, and 100 mg/mL streptomycin (Gibco 15140122; Thermo Fisher Scientific, Waltham, MA, USA) until use [72 (link)].
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!