Log In Sign up
The largest database of trusted experimental protocols

Butanone

Manufactured by Sinopharm
Visit Supplier
Sourced in China

Butanone is a colorless, flammable liquid with a characteristic acetone-like odor. It is commonly used as a solvent, a chemical intermediate, and in the production of various industrial and consumer products.

Automatically generated - may contain errors

Lab products found in correlation

Toluene, by Sinopharm (3 mentions) Trifluoroacetic acid, by Maclin Biochemical Technology (2 mentions) Triphenyl phosphine, by Maclin Biochemical Technology (2 mentions) Cyclohexane, by Sinopharm (2 mentions) Boron trifluoride etherate, by Maclin Biochemical Technology (2 mentions) 2 6 di tert butyl p cresol, by Maclin Biochemical Technology (2 mentions) Styrene, by Maclin Biochemical Technology (2 mentions) Methanol, by Sinopharm (2 mentions) Hexane, by Sinopharm (2 mentions) Cyclohexanone, by Sinopharm (1 mentions) Butyraldehyde, by Sinopharm (1 mentions) Ni no3 2 6h2o, by Sinopharm (1 mentions) Aniline, by Sinopharm (1 mentions) Ethanolamine, by Sinopharm (1 mentions) Al no3 3 9h2o, by Sinopharm (1 mentions) Vanillin, by Sinopharm (1 mentions) Methyl methacrylate, by Sinopharm (1 mentions) Acetone, by Sinopharm (1 mentions)

4 protocols using butanone

1

Synthesis of Styrene-Butadiene Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
1,3-Butadiene (Bd, 1.9 M in hexane) in a ChemSeal bottle was purchased from Energy China and used as received. Styrene (St, 99%) was obtained from Macklin China. The Styrene was purified by distillation over calcium hydride with dilution to 2 M in hexane. 2,3-Butanedione (98%), benzil (98%), 2,6-dimethylaniline (99%), 2,6-diisopropylaniline (96%) and diisobutylaluminium hydride (Al(i-Bu)3, 1 M in n-hexane) were obtained from Energy China. Boron trifluoride etherate (B, 98%), trifluoroacetic acid (TFA, 99%), triphenyl phosphine (PPh3, 97%) and 2,6-di-tert-butyl-p-cresol (Antiager 264, 97%) were purchased from Macklin China and used as received. Nickel (II) naphthenate (Ni, 5 wt %) was supplied by Meryer China and diluted to 0.025 M with cyclohexane. Toluene, cyclohexane (analytically pure reagent (AR)), hexane (AR), methanol (AR), ethanol (AR) and butanone were purchased from Sinopharm Chemical Reagent Co., Ltd. and used as received.
Zheng N., Liu J., Li Z., Lu J., Ni Y, & Min X. (2023). Synthesis of block copolymer with cis-1,4-polybutadiene and isotactic-rich polystyrene using α-diimine nickel catalysts. Royal Society Open Science, 10(10), 230791.
+ Open protocol
+ Expand
2

Synthesis of Ni-Al Catalysts and Organic Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
Ni(NO3)2·6H2O, Al(NO3)3·9H2O, and
Na2CO3, all supplied by Sinopharm Chemical Reagent
Co., Ltd. were used for the preparation of the NiyAlOx formulations. A Ni–Al
alloy (50:50 w/w) supplied by J&K Chemical Co., Ltd. was used
for preparing RaneyNi. FF, 4-anisaldehyde, 4-chlorobenzaldehyde, vanillin,
butyraldehyde, 1-butylamine, 2-butylamine, cyclohexanone, cyclohexylamine,
butanone, ethanolamine, aniline, benzylamine, and morpholine were
also supplied by Sinopharm Chemical Reagent Co., Ltd. HMF, FMA, THFMA,
FAA, and THFAA were procured from Shanghai Shaoyuan Co., Ltd. Glycolaldehyde
was purchased from Ark Pharm, Inc. Dioxane, ethanol and aqueous ammonia
solution (28 wt %) were purchased from Damao Chemical Reagent Factory.
Hydrogen was obtained commercially from Lanzhou Yulong Gas Co., LTD.
All the chemicals were used as received without further purification.
Yuan H., Li J.P., Su F., Yan Z., Kusema B.T., Streiff S., Huang Y., Pera-Titus M, & Shi F. (2019). Reductive Amination of Furanic Aldehydes in Aqueous Solution over Versatile NiyAlOx Catalysts. ACS Omega, 4(2), 2510-2516.
+ Open protocol
+ Expand
3

Synthesis of Styrene-Butadiene Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
1,3-Butadiene (Bd, 1.9 M in hexane) in a ChemSeal bottle was purchased from Energy China and used as received. Styrene (St, 99%) was obtained from Macklin China. The Styrene was purified by distillation over calcium hydride with dilution to 2 M in hexane. 2,3-Butanedione (98%), benzil (98%), 2,6-dimethylaniline (99%), 2,6-diisopropylaniline (96%) and diisobutylaluminium hydride (Al(i-Bu)3, 1 M in n-hexane) were obtained from Energy China. Boron trifluoride etherate (B, 98%), trifluoroacetic acid (TFA, 99%), triphenyl phosphine (PPh3, 97%) and 2,6-di-tert-butyl-p-cresol (Antiager 264, 97%) were purchased from Macklin China and used as received. Nickel (II) naphthenate (Ni, 5 wt %) was supplied by Meryer China and diluted to 0.025 M with cyclohexane. Toluene, cyclohexane (analytically pure reagent (AR)), hexane (AR), methanol (AR), ethanol (AR) and butanone were purchased from Sinopharm Chemical Reagent Co., Ltd. and used as received.
Zheng N., Liu J., Li Z., Lu J., Ni Y, & Min X. (2023). Synthesis of block copolymer with cis-1,4-polybutadiene and isotactic-rich polystyrene using α-diimine nickel catalysts. Royal Society Open Science, 10(10), 230791.
+ Open protocol
+ Expand
4

Grafting PTFE Micropowder onto PET Film

Check if the same lab product or an alternative is used in the 5 most similar protocols
Commercially available PTFE micropowder (Dyneon™ TF-9205, 3M, Neuss, Germany) and fluorosurfactant ((C2H4O)n(CF2CF2)mF Zonyl™ FSN-100, Dupont, Wilmington, DE, USA) were used as received. Methyl methacrylate (MMA, purity: 99%), butyl acetate (purity: 99%), toluene (purity: 99.5%), butanone (purity: 99.5%), acetone (purity: 99.5%), Mohr’s salt (FeH8N2O8S2·6H2O) were purchased from Sinopharm Chemical Reagent Co., Ltd., Shanghai, China and utilized directly without any further purification. Polyethylene terephthalate (PET) film and polyacrylate resin (50% solid content) were supplied by Huagong Image Technology Development Co., Ltd., Wuhan, China. Ultrapure water with a conductivity of 18.3 S/cm was used as the grafting medium.
Wang H., Wen Y., Peng H., Zheng C., Li Y., Wang S., Sun S., Xie X, & Zhou X. (2018). Grafting Polytetrafluoroethylene Micropowder via in Situ Electron Beam Irradiation-Induced Polymerization. Polymers, 10(5), 503.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!