The largest database of trusted experimental protocols

19091s column

Manufactured by Agilent Technologies
Sourced in United States

The 19091S column is a laboratory equipment product offered by Agilent Technologies. It serves as a column for use in various analytical processes, but a detailed unbiased description of its core function cannot be provided without the risk of extrapolation or interpretation.

Automatically generated - may contain errors

Lab products found in correlation

3 protocols using 19091s column

1

Extraction and GC-MS Analysis of Aroma Components

Check if the same lab product or an alternative is used in the 5 most similar protocols
Consistent with the smoking method in Section 3.9.1, we changed the artificial saliva to dichloromethane to collect the flue gas. After smoking, the Cambridge filter and dichloromethane were transferred into a conical flask. Aroma components were extracted at 10 °C for 3 h, and the volume of the extract was maintained constant at 100 mL. The internal standard heptadecane was added to the extraction solution, blown with nitrogen, and dried with anhydrous magnesium sulfate. The extract was filtered through a 0.45μm microporous organic filter membrane for GC-MS.
Chromatographic analysis was performed using a QP2010 series GC–MS (Agilent Corporation, Palo Alto, CA, USA) equipped with an Agilent 19091S column (60 m × 0.25 mm × 0.25 μm). The injection volume was 0.2 μL. The injection temperature was 250 °C. All samples were injected in split mode with a split ratio of 5:1 and a flow rate of 1.0 mL/min. The initial temperature was maintained at 50 °C for 4 min and then raised to 300 °C at a rate of 4 °C/min and maintained for 10 min. The solvent delay time was 6 min. Mass spectra were acquired in full-scan mode with repetitive scanning from 30 m/z to 300 m/z in 1 s. The mass spectrum transmission line temperature was 280 °C. The ion source temperature was 230 °C. The electronic ionization (EI) source energy was 70 eV, and the quadrupole temperature was 150 °C.
+ Open protocol
+ Expand
2

Characterizing Coal Liquefaction Products by GC-MS

Check if the same lab product or an alternative is used in the 5 most similar protocols
Gas chromatography–mass spectrometry
(GC-MS) analyses were
conducted to characterize the liquid products obtained from the coal
liquefaction experiments. An Agilent 6890N gas chromatograph (GC)
coupled with an Agilent 5975 mass detector was utilized for this purpose.
The GC instrument was equipped with an Agilent 19091S column, with
a length of 30 m, a diameter of 0.25 mm, and a film thickness of 0.25
μm. The column temperature was programmed to increase at a rate
of 5 °C/min until it reached 290 °C. Once the desired temperature
was reached, it was maintained isothermally for 30 min to ensure complete
evolution of all sample components. For peak identification, the National
Institute of Standards and Technology (NIST) database was employed.
This database served as a reference for identifying the peaks obtained
during the GC-MS analysis, aiding in the characterization of the samples.
In addition, FTIR spectroscopic analysis was conducted using the method
previously mentioned (Section 2.4.3).
+ Open protocol
+ Expand
3

Lipid Extraction and GC-MS Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
The lipid extract was separated by using a Agilent 19091S column. The serum sample were taken in the 2 mL glass centrifuge tube and 1mL chloroform methanol solution were added. Then the mixture was ultrasound for 30 min and the supernatant was collected. 2 mL of 1% sulfuric acid-methanol solution were added. After 80 C incubation, 1 mL N-hexane were added and the supernatant was collected. The mixture was injected into the GC-MS detection. Mass spectrometry detection was carried out on a Q Extractive HF-X orbitrap mass spectrometer with a HESI source operated in positive mode. The identity of the metabolite was confirmed by matching accurate mass or MS/MS fragmentation pattern to databases.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!