The largest database of trusted experimental protocols

Whatman 50 filter paper

Manufactured by Cytiva

The Whatman 50 filter paper is a high-quality cellulose-based filtration product designed for general laboratory applications. It is characterized by its medium filtration speed and medium particle retention, making it suitable for a variety of filtering tasks. The Whatman 50 filter paper is available in a range of sizes to accommodate different laboratory needs.

Automatically generated - may contain errors

6 protocols using whatman 50 filter paper

1

Qualitative Virus Preparation Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols

Example 3

For qualitative analysis of virus preparations, electron microscopy pictures were taken. For this, 5 μl virus suspension was added to a ready-to-use carbon-coated copper grid and incubated for 2 min. The grid was then washed with 5 μl bidest water and coated with 2% uranyl acetate for 30 s. The drops were absorbed from the grid with Whatman 50 filter paper and the grid was dried for approximately 1 min. Photos were taken with a Zeiss transmission electron microscope at 20,100× magnification.

+ Open protocol
+ Expand
2

Trichoderma atroviride Inoculum Cultivation

Check if the same lab product or an alternative is used in the 5 most similar protocols
A Trichoderma atroviride inoculum was plated on the center of a PDYC (24 g l−1 potato dextrose broth (Difco, UK), 1.2 g l−1 casein hydrolysate (Sigma-Aldrich), 2 g l−1 yeast extract (Difco) agar plate and incubated for twenty-four hours in dark conditions. 3 ml of PDYC media were subsequently added to a new 10 cm culture plate. In the center of the plate a Whatman 50 filter paper cut to a diameter of 9 cm was placed over an 8 cm Whatman 1 filter paper. On top of these, a 0.5 cm square from the periphery of the fungal growth on the agar plate was placed in the center and incubated in the dark at room temperature for 48 h.
+ Open protocol
+ Expand
3

Negative Staining of SVA Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Samples from both the 20% and 35% sucrose fractions of PEG-precipitated LF-BK αVβ6 propagated SVA were evaluated by negative staining on a Hitachi 7600 transmission electron microscope with a 2 k × 2 k AMT camera at 80 kV. Prior to application of sample, 300-mesh formvar/carbon coated grids were inverted on 1% alcian blue for 5 min followed by a rinse in ddH2O. Samples were adhered at a 1:5 dilution for 5 min; 2% uranyl acetate was added while blotting across Whatman 50 filter paper.
+ Open protocol
+ Expand
4

Electron Microscopy of Viral Preparations

Check if the same lab product or an alternative is used in the 5 most similar protocols

Example 3

For qualitative analysis of virus preparations, electron microscopy pictures were taken. For this, 5 μl virus suspension was added to a ready-to-use carbon-coated copper grid and incubated for 2 min. The grid was then washed with 5 μl bidest water and coated with 2% uranyl acetate for 30 s. The drops were absorbed from the grid with Whatman 50 filter paper and the grid was dried for approximately 1 min. Photos were taken with a Zeiss transmission electron microscope at 20,100× magnification.

+ Open protocol
+ Expand
5

Quantifying DNA Synthesis via [3H]Thymidine

Check if the same lab product or an alternative is used in the 5 most similar protocols
The liver and kidneys were promptly removed, washed and 1 G of liver and kidney were homogenized in ice-cold water (10% w/v). The precipitate was incubated overnight at 4°C with cold PCA (10%) after rinsing with cold TCA (5%). It was centrifuged after incubation, and the precipitate was rinsed with 5% of cold PCA. All centrifugations had been done at 4°C up to this point. The precipitate was dissolved in warm PCA (10%), incubated for 30 min in a boiling water bath and then filtered using Whatman 50 filter paper. By adding the scintillation fluid to the filtrate, it was employed for [ 3 H]thymidine incorporation counting in a liquid scintillation counter. DPM/g DNA was used to calculate the quantity of [ 3 H]thymidine incorporated. 33, (link)34
+ Open protocol
+ Expand
6

Trichoderma atroviride Growth Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
A Trichoderma atroviride inoculum, was plated on the center of a PDYC (24 g l -1 potato dextrose broth (Difco, UK), 1.2 g l -1 casein hydrolysate (Sigma-Aldrich), 2 g l -1 yeast extract (Difco) agar plate and incubated for twenty-four hours in dark conditions. 3 ml of PDYC media were subsequently added to a new 10 cm culture plate. In the center of the plate a Whatman 50 filter paper cut to a diameter of 9 cm was placed over an 8 cm Whatman 1 filter paper. On top of these, a 0.5 cm square from the periphery of the fungal growth on the agar plate was placed in the center and incubated in the dark at room temperature for 48 hours.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!