The PMMA material used for the fabrication of the wells and the plate was provided by Abaqueplast, France. The Z-ABS used for the plate frame printing was directly purchased from Zortrax. The yttrium(iii ) oxide (Y2O3) (purity 99.99%), used for XRD evaluation, was supplied by Sigma Aldrich. The powdered zinc sulphide:copper (ZnS:Cu) was supplied by Phosphor Technology, UK. Silicon powder (NIST certified) for alignment of the Z position of the XRD motorized plate was bought from the National Institute of Standards and Technology (NIST).
Yttrium iii oxide y2o3
Manufactured by Merck Group
Yttrium(iii) oxide (Y2O3) is a white, crystalline compound that is commonly used as a raw material in the manufacturing of various types of lab equipment and devices. It has a high melting point, good thermal and chemical stability, and excellent optical properties. Yttrium(iii) oxide is primarily used as a precursor material in the production of phosphors, ceramics, and optical coatings.
Automatically generated - may contain errors
2 protocols using yttrium iii oxide y2o3
1
Fabrication and Characterization of Experimental Materials
2
Banana Waste Adsorbents for Rare-Earth Removal
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
The adsorbents consisted of three banana (Musa Cavendish) waste materials: BR, BPS and BP, which were collected from a farm located in the south of Ecuador (3°14´S, 79°51´W). The materials were processed immediately after the fruit harvesting. They were washed, chopped in small pieces of about 2-4 cm 3 , dried into a forced air convection oven at 45 ºC, milled and sieved at particle size from 250 to 800 µm.
Finally, these particles in this fraction were air-dried (45ºC) and stored in plastic bottles for further experimentation. Neodymium (III) nitrate hexahydrate (Nd(NO3)3.6H2O, 99.9% Alfa Aesar), yttrium(III) oxide (Y2O3, 99.99%, Sigma Aldrich), europium(III) oxide (Eu2O3, 99.99%, Sigma Aldrich), dysprosium(III) nitrate pentahydrate (Dy(NO3).5H2O, 99.9%, Alfa Aesar) and terbium(III) chloride hexahydrate (TbCl3.6H2O, 99.99%, Alfa Aesar) were used to prepare the stock solutions. Milli-Q water was used to prepare all the solutions.
Finally, these particles in this fraction were air-dried (45ºC) and stored in plastic bottles for further experimentation. Neodymium (III) nitrate hexahydrate (Nd(NO3)3.6H2O, 99.9% Alfa Aesar), yttrium(III) oxide (Y2O3, 99.99%, Sigma Aldrich), europium(III) oxide (Eu2O3, 99.99%, Sigma Aldrich), dysprosium(III) nitrate pentahydrate (Dy(NO3).5H2O, 99.9%, Alfa Aesar) and terbium(III) chloride hexahydrate (TbCl3.6H2O, 99.99%, Alfa Aesar) were used to prepare the stock solutions. Milli-Q water was used to prepare all the solutions.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!