The largest database of trusted experimental protocols

Abralyt hicl gel

Manufactured by EASYCAP
Sourced in Germany

Abralyt HiCl Gel is a laboratory product manufactured by EASYCAP. It is a conductive gel used for the application and removal of electrodes in various laboratory and clinical settings. The gel provides a low-impedance connection between the skin and the electrode, facilitating the transfer of electrical signals.

Automatically generated - may contain errors

2 protocols using abralyt hicl gel

1

Resting-State EEG Acquisition Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Spontaneous EEG was recorded with a TMS-compatible 64-channel EEG cap (BrainCap, BrainProducts, Germany; Ag/AgCl electrodes) in accordance with the 10–10 extended international system. All electrodes were referred to the right mastoid and impedance was kept below 5 kΩ using a viscous electrode paste (Abralyt HiCl Gel, EasyCap, Germany); the ground electrode was incorporated in the cap at AFz. BrainRecorder software and BrainAmp MR Plus amplifiers (BrainProducts, Germany) with a 5000 Hz sampling rate and low-pass filter of 1000 Hz (no high-pass filter, resulting in a DC recording) were used to record periods of EEG throughout the experiment. Participants were at rest, with eyes open and gaze steadied on a fixation point.
+ Open protocol
+ Expand
2

64-Channel High-Density EEG Recording

Check if the same lab product or an alternative is used in the 5 most similar protocols
Neurophysiological data were recorded with an equidistant 64-channel Ag/AgCl EEG cap (Easycap GmbH, Hersching, Germany), including a fronto-polar ground electrode, a reference electrode positioned on the tip of the nose, and two electrooculogram (EOG) electrodes, one positioned below each eye. Impedances were kept below 20 kΩ using Abralyt HiCl gel (Easycap GmbH). We intentionally did not collect data from the five most occipital electrodes due to their large distance to the scalp as well as from 10 electrodes around the ears due to concurrent around-the-ear EEG recording with cEEGrids (Debener et al., 2015 (link)). Results obtained with cEEGrid will be presented elsewhere. EEG cap data were sampled at 500 Hz using a stationary BrainAmp amplifier (Brain Products GmbH, Gilching, Germany) with a recording band-pass filter from 0.0159 to 250 Hz. To reduce artifacts, participants were instructed to direct their gaze to a white fixation cross on a gray computer screen in front of them and to move as little as possible.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!