The largest database of trusted experimental protocols

4 protocols using 2 2 bipyridine bpy

1

Synthesis of Rhenium Carbonyl Complexes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Rhenium carbonyl was purchased from Pressure Chemicals (Pittsburgh, Pennsylvania, USA). Re(CO)5Cl was synthesized as previously described.66 (link) The diimine ligands, 2,9-dimethyl-1,10-phenanthroline (dmphen, Cayman Chemical, Ann Arbor, MI), 1,10-phenanthroline (phen, Sigma Aldrich, St. Louis, MO), 2,2’-bipyridine (bpy, Alfa Aesar, Ward Hill, MA), 4,4’-dimethyl-2,2’-bipyridine (dmbpy, Chem-Impex International Inc., Wood Dale, IL), 4,4’-dimethoxy-2,2’-bipyridine (dmobpy, Sigma Aldrich, St. Louis, MO), 4,4’-di-tert-butyl-2,2’-bipyridine (tbutylbpy, Sigma Aldrich, St. Louis, MO), and 4,4’-bis(trifluoromethyl)-2,2’-bipyridine (CF3bpy, Sigma Aldrich, MO), were used as received. The fac-[Re(CO)3(NN)Cl] complexes, where NN is the diimine ligand, were synthesized using previously reported procedures.136 (link),137 (link) The isonitrile ligands, para-tolyl ICN (ptolICN), 2,6-dimethylphenyl ICN (2,6-dmphenylICN), 3,5-dimethylphenyl (3,5-dmphenylICN), para-methoxyphenyl ICN (p-methoxyphenylICN, Sigma Aldrich, St. Louis, MO), and para-chlorophenyl ICN (p-chlorophenylICN), were purchased or synthesized from their respective aniline species using a previously reported procedure.138 (link)fac-[Re(CO)3(dmphen)(ptolICN)]OTf (TRIP-1a) was synthesized as previously reported.69 (link) All solvents were ACS grade or higher.
+ Open protocol
+ Expand
2

Synthesis of P(VDF-CTFE) Copolymer

Check if the same lab product or an alternative is used in the 5 most similar protocols
P(VDF-CTFE) 80/20 (with 20 mol % CTFE) was purchased from China Bluestar Chengrand Chemical Co. Ltd. (Beijing, China). Tetrahydrofuran (THF, Tianjin Reagents Co. Ltd., Tianjin, China, AR grade) was dried and distilled from sodium/benzophenone under nitrogen. 2,2′-Bipyridine (Bpy, Alfa Aesar, Shanghai, China, 99%), N-methylpyrrolidone (NMP, Tianjin Reagents Co. Ltd., Tianjin, China, AR grade), N,N-dimethylformamide (DMF, Tianjin Reagents Co. Ltd., Tianjin, China, AR grade) and acetone were purchased from Tianjin Reagents Co. Ltd. (Tianjin, China, AR grade) and used as received without further purification. Commercially available copper powder with a diameter of 75 μm was washed with dilute hydrochloric acid once and deionized water twice followed by drying in a N2 atmosphere before use and other chemicals were commercially available and used as received unless specified.
+ Open protocol
+ Expand
3

Synthesis and Characterization of Polyurethane-Based Materials

Check if the same lab product or an alternative is used in the 5 most similar protocols
5,5-dimethylhydantoin (DMH), 4-vinylbenzyl chloride, copper(I) bromide, [2-(Methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (SBMA), poly (ethyl glycol) methacrylate (PEGMA, Mn = 360 Da), and ethyl-2-bromoisobutyrate (EBIB) were purchased from Sigma-Aldrich (Sigma-Aldrich, St. Louis, MO, USA). 2-bromoisobutyryl bromide (BIBB), 2-(Dimethylamino) pyridine, 2-2’-bipyridine (bpy), and 2-hydroxyethyl methacrylate (HEMA) were purchased from Alfa Aesar (Lancashire, UK). Triethylamine and ethanol were purchased from J.T. Baker (Allentown, PA, USA). Methanol, dichloromethane, and toluene were from MACRON (Allentown, PA, USA). N,N-dimethylformamide (DMF) was acquired from Duksan (Ansan, Korea). All the above chemicals were purchased at the highest purity grade. The thermoplastic ester-based polyurethane pellet (TPU, Estane, S385A) was purchased from Lubrizol Advanced Materials, (Inc., Wickliffe, OH, USA).
+ Open protocol
+ Expand
4

Synthesis of Cobalt-based Electrocatalyst

Check if the same lab product or an alternative is used in the 5 most similar protocols
All chemicals were purchased from the indicated commercial vendors and used as received. Deionized (DI) water used for all experiments was processed in a Millipore Direct-Q system (18.2 MΩ cm resistivity). Melamine (M, 99%), chloroplatinic acid solution (8 wt.% H2PtCl6 in H2O), cobalt (II) chloride hexahydrate (CoCl2•6H2O, 98% ACS), and Nafion perfluorinated resin solution (5 wt.% in lower aliphatic alcohols and water) from Sigma-Aldrich; hydrochloric acid (HCl, 32 wt.%, AR) from Bio-Lab, Israel; triethanolamine (TEOA, 99%) from Carl Roth; 2,2'-bipyridine (bpy, 99+%) from Alfa Aesar; ethylene glycol (EG, ≥99.5%) from Merck; acetonitrile (MeCN, HPLC solvent) and anhydrous sodium sulfate (Na2SO4, 99%) from J. T. Baker.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!