The largest database of trusted experimental protocols

H 7000 electron microscope

Manufactured by Hitachi
Sourced in Japan, United States

The H-7000 is an electron microscope manufactured by Hitachi. It is designed to produce high-resolution images by using a focused beam of electrons to scan the surface of a specimen. The H-7000 provides detailed information about the structure and composition of materials at the nanoscale level.

Automatically generated - may contain errors

38 protocols using h 7000 electron microscope

1

Negative Staining for Electron Microscopy

Check if the same lab product or an alternative is used in the 5 most similar protocols
The samples were deposited on carbon‐coated 300‐mesh copper grids, incubated for 3 min for absorption, and then washed by water. Negative staining was carried out by staining with 2% uranyl acetate for 1.5 min. After air drying, the samples were viewed using a Hitachi H‐7000 electron microscope (Hitachi, Japan).
+ Open protocol
+ Expand
2

Submandibular Gland Morphometric Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Submandibular gland tissues were fixed in 10% formalin, paraffin-embedded, sectioned at 5 μm, and stained with Hematoxylin-Eosin for morphometric evaluation using the Leica Qwin software (Q550CW, Leica, Mannheim, Germany). Other gland specimens were fixed in 2% paraformaldehyde-1.25% glutaraldehyde. Ultrathin sections were prepared and stained with uranyl acetate and lead citrate and observed by TEM (H-7000 electron microscope; Hitachi, Tokyo, Japan). The area of acinar cells, number of secretory granules, and area of secretory granules were calculated using the imaging software (Q550CW, Leica, Mannheim, Germany) and ImageJ (NIH, Bethesda, MD, U.S.A.). The data were from 9 randomly selected acini in each section from 12 control and 12 transplanted glands.
+ Open protocol
+ Expand
3

Ultrastructural Analysis of Liver Tissue

Check if the same lab product or an alternative is used in the 5 most similar protocols
Con A-treated animals were sacrificed after 6 h of ConA administration and hepatic tissue were obtained as described previously [48 (link)]. Ultrathin sections (50 nm) were made and observed under a Hitachi H-7000 electron microscope (Hitachi, Tokyo, Japan).
+ Open protocol
+ Expand
4

Hepatic Tissue Ultrastructural Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
After 6 h, Con A-treated animals were killed and hepatic tissue dissected out and processed as described elsewhere.30 (link) Ultrathin sections (50 nm) were made and observed under a Hitachi H-7000 electron microscope (Hitachi, Tokyo, Japan).
+ Open protocol
+ Expand
5

Extraction and Purification of Viral Particles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Thirty worker bees were frozen in liquid nitrogen, ground to a fine powder, and homogenized in 10-ml extraction buffer (0.1 M potassium phosphate buffer [pH 7.5], 0.2% diethyldithiocarbamate, 1/5 volume of diethyl ether). The mixture was emulsified with 5 ml carbon tetrachloride and centrifuged at 5,000 × g at 4°C for 30 min to remove tissue debris. Supernatant containing viruses was centrifuged once more at 5,000 × g at 4°C for 30 min and then filtered through a 45-μm filter to remove small tissue debris. The filtrate was then centrifuged at 10,187 × g for 6 h at 4°C to pellet the viral particles. The pellet was resuspended in 2 ml of 0.2 M phosphate-buffered saline (PBS) buffer. A 15-µl portion of viral solution was examined for the presence of virus particles in an electron microscope. The rest of the viral solution was saved for subsequent viral RNA isolation and cDNA library construction.
Virus particles were negatively stained with 2% uranyl acetate on a Formvar-coated Ni grid and viewed in a Hitachi H-7000 electron microscope at magnifications between ×33,000 and ×100,000.
+ Open protocol
+ Expand
6

TEM Examination of Biological Samples

Check if the same lab product or an alternative is used in the 5 most similar protocols
For TEM examination, a 10 μl sample was loaded onto a carbon-coated copper grid and dried on filter paper after 2 min. Then, the sample was negatively stained. After that, the samples were observed with a Hitachi H7000 electron microscope at 200 kV.
+ Open protocol
+ Expand
7

Electron Microscopy of Glutaraldehyde-Fixed Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
TetPtf1a cells grown on p60 culture dishes to EB7+28 were fixed for 45 minutes in 3% glutaraldehyde, 1% paraformaldehyde, 0.1 M cacodylate buffer solution. Fixed tissues were then prepared and sectioned as previously described [18 (link)]. Sections were then examined using a Hitachi H-7000 electron microscope.
+ Open protocol
+ Expand
8

Ultrastructural Analysis of Mouse Placenta

Check if the same lab product or an alternative is used in the 5 most similar protocols
After perfusion with 4% PFA, some samples of the mouse placenta with uterus were cut into small blocks and incubated in 2% glutaraldehyde in 0.1 M PB for 2 hours. The samples were subsequently incubated with a 1% solution of OsO4 for 1 hour at 4°C, dehydrated by passage through a graded series of ethanol followed by propylene oxide, and embedded in epoxy resin. Ultrathin sections (70 nm) were stained with lead citrate and examined with an H-7000 electron microscope (Hitachi, Tokyo, Japan).
+ Open protocol
+ Expand
9

Ultrastructural Analysis of Cardiac Tissue

Check if the same lab product or an alternative is used in the 5 most similar protocols
Small cubic pieces ≤ 1 mm3 were dissected from left ventricles and fixed with 2.5% glutaraldehyde in 0.1 mol/ L sodium phosphate (pH 7.4) overnight at 4 °C. After post-fixation in 1% OsO4, samples were dehydrated through graded alcohols and embedded in Epon Araldite. Ultrathin sections (50 nm) were cut using an ultramicrotome (Ultracut E, Leica), and stained with uranyl acetate and lead citrate. The specimens were viewed on a Hitachi H-7000 Electron Microscope (Pleasanton, CA, USA). Images were captured using a Gatan high resolution 4 k × 4 k digital camera and Gatan Ditital Micrograph software (22 (link)).
+ Open protocol
+ Expand
10

Ultrastructural Analysis of RGM1 Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
RGM1 cells were treated with IND for 1 h after pretreatment with 5-µg/ml Qing Dai for 1 h. The cultures were fixed with 2% glutaraldehyde in 0.1 M phosphate buffer, pH 7.4. Thereafter, the cells were postfixed for 2 h in cold-buffered, 1% OsO4 after experimental manipulations and were dehydrated in a graded series of ethanol and propylene oxide, and were embedded in Epon. Epon sections were cut on the Reichert-Jung ultramicrotome, were stained with uranyl acetate and lead citrate, and were then imaged under a Hitachi (H-7000) electron microscope.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!