The largest database of trusted experimental protocols

Mts kit

Manufactured by Promega
Sourced in United States, China

The MTS kit is a laboratory equipment product offered by Promega. It is used to measure the viability and metabolic activity of cells in culture. The core function of the MTS kit is to provide a colorimetric method for determining the number of viable cells in proliferation or cytotoxicity assays.

Automatically generated - may contain errors

98 protocols using mts kit

1

Cytotoxicity Evaluation of Microneedle Patches

Check if the same lab product or an alternative is used in the 5 most similar protocols
NIH 3T3 fibroblast cells were grown at 37°C in Dulbecco's modified Eagle's medium (DMEM) supplemented with 10% fetal bovine serum (Gibco‐Invitrogen Corp., USA). Cultures were maintained in a 95% air/5% carbon dioxide atmosphere, at 95% relative humidity. MN patches were sterilized by exposure to UV light for 15 min. The cytotoxicity of the MN patches was studied by exposing cell lines to 3 × 3 tested needles. Cytotoxicity was assessed 48 h after cells were added, using MTS kits
43 (link) (CellTiter 96 Aqueous kit, Promega, USA) and live/dead fluorescence viability kits
26 (link) (Abcam, England). The results are reported as means ± SD (n = 4).
+ Open protocol
+ Expand
2

Cell Proliferation Assay with MTS

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell proliferation assays were performed using the MTS kits (Promega, Madison, Wisconsin, USA). Cell suspensions (1000 cells/well) were inoculated in a 96-well plate. After culturing for 24 h, the old mediums were discarded. Mixtures of MTS and medium were added into each well (Reagent: media = 1:4). Optical density (OD) values at 490 nm wavelength were measured after 2 h cultured.
+ Open protocol
+ Expand
3

Cell Viability Assay of CNC Extract

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell viability was assessed with MTS kits according to the manufacturer instructions (Promega, Madison, WI, USA). Briefly, 3,000 cells/well were seeded in 96-well plates. After overnight incubation, the cells were treated with or without CNC extract (31.25, 46.875, 62.5, 93.75, 125, 187.5, 250 μg/mL) for 48 h prior to the MTS assays. The classic ferrostatin-1 rescue experiment was performed by MTS, the concentration of ferrostatin-1 was 1uM, and the concentration of CNC extract was 100ug/mL. Cells morphology was observed and photographed under an inverted microscope (Olympus, Tokyo, Japan).
+ Open protocol
+ Expand
4

Cell Viability and Colony Formation Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
After 24 h of transfection, cells were trypsinized and plated into 96-well plates (8000 per well). At different time points (12 h, 24 h, 48 h), cells were determined by using the MTS kits (Promega, WI, USA) following the manufacturer's protocol and the absorption was read at 490 nm. For colony formation assay, cells were trypsinized and plated in 6-well plates (2000 per well) after transfected for 24 h. Colonies were counted 14 days later using Crystal violet fixed.
+ Open protocol
+ Expand
5

Cell Viability Assay for Adipocytes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell viability was measured by the cell proliferation MTS kit (Promega Corporation, Madison, MI, USA) according to the manufacturer’s protocols. Briefly, the 3T3-L1 adipocytes were treated with various concentrations of adenanthin in 96-well plates for 7 days. The medium was removed, and the MTS solution was added to each well for 2 h. The absorbance was measured at 492 nm by using a microplate reader (Perkin Elmer Envision Multilabel reader).
+ Open protocol
+ Expand
6

Cell Viability Measurement via MTS Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell viability was measured using an MTS kit (lot#G971A, Promega). Cells were cultured in a 96‐well plate, and the assay solution was added for an incubation of 1.5 hours in the dark. Amicroplate reader (BioTek ELx800) was used to measure the results at 490 nm.
+ Open protocol
+ Expand
7

Cell Viability Assessment by MTS Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell viability was determined using an MTS kit (Promega Corporation, Madison, WI, USA). SK-N-SH cells were seeded at a density of 4,000 cells/well and treated in 96-well plates for various durations. Following 24 h culture, the cells were washed with PBS three times and fresh DMEM medium (100 µl) and MTS (20 µl) reagent were added to the wells for 1 h at 37°C in the dark (25 (link),26 (link)). The absorbance was measured at a wavelength of 490 nm on an ELx808 absorbance reader (BioTek Instruments, Inc., Winooski, VT, USA). To eliminate possible interference by alcohol, cells treated with the same concentrations of alcohol (0, 50, 100, 200 and 400 mM) and memantine (4 µM) but without addition of assay reagents were used as blank controls. All experiments were repeated at least five times.
+ Open protocol
+ Expand
8

Cell Proliferation Assay Using MTS Kit

Check if the same lab product or an alternative is used in the 5 most similar protocols
The cells were seeded at a density of 5 × 103 cells/well in a 96-well plate. After the cells were incubated with drugs following the above procedures, the cell proliferation was detected using an MTS kit (CTB169, Promega, WI, USA). The absorbance at 490 nm was read on a microplate reader (51119200, Thermo Fisher Scientific, Waltham, MA, USA) and the relative cell proliferation was calculated according to the formula provided in the kit.
+ Open protocol
+ Expand
9

Evaluating Tyloxapol's Impact on Cell Viability

Check if the same lab product or an alternative is used in the 5 most similar protocols
Raw 264.7, BMMs and BMSCs cells were pretreated separately with the indicated concentrations of tyloxapol for 48 ​h. Then, the cellular viability was evaluated utilizing the commercial MTS kit (Promega, Australia) on the basis of the manufacturer’s operating instructions.
+ Open protocol
+ Expand
10

Cell Viability Assay with CA

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were seeded (2 × 104 cell/well) on 96 well plates, stabilized for 24 h, and incubated with various concentrations of CA (10-1000 μg/mL) for additional 48 h. Cell viability was monitored using the cell proliferation 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) kit (Promega Co., Madison, WI, USA) according to the manufacturer’s instructions. The absorbance was measured at 490 nm with a VERSAmax microplate reader (Molecular Devices, Sunnyvale, CA, USA).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!