The largest database of trusted experimental protocols

Micromass detector

Manufactured by Waters Corporation

The MICROMASS detector is a mass spectrometry instrument designed for analytical applications. It is capable of detecting and measuring the mass-to-charge ratio of ionized molecules and atoms. The MICROMASS detector can be used to identify and quantify a wide range of chemical compounds in various samples.

Automatically generated - may contain errors

7 protocols using micromass detector

1

Multi-Modal Analysis of Bio-Samples

Check if the same lab product or an alternative is used in the 5 most similar protocols
LC-MS on Waters Acquity ultra Performance LC with Waters MICROMASS detector, rheological measurement on ARES-G2 rheometer; electron microscopy was performed on a FEI Morgagni 268 TEM with a 1k CCD camera (GATAN, Inc., Pleasanton, CA); MTT assay for cell toxicity test on DTX880 Multimode Detector.
+ Open protocol
+ Expand
2

Purification and Characterization of Product

Check if the same lab product or an alternative is used in the 5 most similar protocols
We used Waters Delta600 HPLC system, which equipped with an XTerra C18 RP column and an in-line diode array UV detector to purify the product. LC-MS machine we used was a Waters Acquity Ultra Performance LC with Waters MICROMASS detector. Hydrogen nuclear magnetic resonance (NMR) spectra were recorded on a Varian Unity Inova 400 with DMSO as solvent. We used Morgagni 268 transmission electron microscope to take Transmission electron microscope (TEM) images. MTT assay for cell cytotoxicity was test on DTX880 Multimode Detector.
+ Open protocol
+ Expand
3

Fluorescent Amino Acid Labeling

Check if the same lab product or an alternative is used in the 5 most similar protocols
All amino acids were purchased from GL Biochem, and NBD-Cl was purchased from TCI America. All the solvents and chemical reagents were used directly as received from the commercial sources without further purification. All the products were purified with HPLC system (Agilent 1100 Series). Confocal microscopy images were obtained on by ZEISS LSM 880 confocal laser scanning microscope. Electron microscopy imaging was performed on an Morgagni 268 transmission electron microscrope. LC-MS was operated on a Waters Acquity Ultra Performance LC with Waters MICRO-MASS detector.
+ Open protocol
+ Expand
4

Synthesis and Characterization of Peptides

Check if the same lab product or an alternative is used in the 5 most similar protocols
2-Cl-trityl chloride resin (0.8–1.0 mmol/g), HBTU and Fmoc-amino acids were purchased from GL Biochem (Shanghai, China). Other chemical reagents and solvents were obtained from Fisher Scientific. We synthesized peptide 1-EP, 1-CP, and 1-E by combining solid phase peptide synthesis (SPPS) and solution-phase synthesis (Scheme S2). After the synthesis, all compounds were purified using a reverse phase HPLC (Agilent 1100 Series) with HPLC grade acetonitrile (0.1% TFA) and HPLC grade water (0.1% TFA) as the eluents. The 1H-NMR and 31P-NMR spectra of compounds were obtained using Varian 400 MR and LC-MS spectra using a Waters Acquity Ultra Performance LC with Waters MICROMASS detector.
+ Open protocol
+ Expand
5

Characterization of Nanoparticle Conjugates

Check if the same lab product or an alternative is used in the 5 most similar protocols
Conjugates were purified with a Water Delta600 HPLC system, equipped with an XTerra C18 RP column and an in-line diode array UV detector. 1H NMR spectra were obtained on a Varian Unity Inova 400 spectrometer. LC–MS spectra were performed on Waters Acquity Ultra Performance LC with Waters MICROMASS detector. TEM images were taken on a Morgagni 268 transmission electron microscope. Rheological data were measured on a TA ARES G2 rheometer with 25 mm cone plate. MTT assay for cell toxicity test were measured on a DTX880 Multimode Detector.
+ Open protocol
+ Expand
6

Analytical Techniques for Peptide Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
All peptides were purified by Water Agilent 1100 HPLC system, equipped with an XTerra C18 RP column. LC-MS was operated on a Waters Acquity Ultra Performance LC with Waters MICRO-MASS detector. Transmission electron microscope (TEM) images were taken on Morgagni 268 transmission electron microscope. Fluorescent analysis was performed on Shimadzu RF-5301-PC fluorescence spectrophotometer. Fluorescence images were taken by ZEISS LSM 880 confocal laser scanning microscope.
+ Open protocol
+ Expand
7

Comprehensive Multi-Analytical Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
LC-MS
on Waters Acquity
ultra Performance LC with Waters MICROMASS detector, rheological measurement
on ARES-G2 rheometer; electron microscopy was performed on a FEI Morgagni
268 TEM with a 1k CCD camera (GATAN, Inc., Pleasanton, CA); MTT assay
for cell toxicity test on DTX880 Multimode Detector.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!